When turned on it clicks an turns back off instantly

Laing Thermotech Series. Autocirc® Instant Hot Water ... Autocirc Pump turns OFF automatically when water temperature reaches 95°F. (35"C), ensuring instant ... Model with adjustable thermostat E-1-BCANRT1 W-06. • For models with the .
More details click here

Sounds like the old brick cooked the Xbox somewhere when it allowed it to overheat. You'll need a replacement console or you could try baking the board but I don't recommend it if you haven't before.

First place to start is the power supply voltages checked and filter caps inspected---set looks at a number of things when set comes on or off--something not right is dealt with by instant shutdown.

1,2 is no error detected---if during or before this you unplugged the set that clears the errors and you will get 1,2.

To confirm with set plugged in turn it on--when power light goes out repeat the self check.

The model indicated is a DLP which uses a lamp---lamp will not usually cause set right on and then instantly off----takes it 15 seconds or so if lamp has failed.

Also set has led on front that may blink.

If instant it is turned on it goes off----you have a short likely in power supply or elsewhere.

If you have more information or a question press the "make a comment button" on this page.

there is a short, could be anything....Check amount of blinking light

you may have registry problem do this Type, without the quotes, “regsvr32 jscript.dll” and then click OK. Next, repeat the process but this time type in the Run box “regsvr32 vbscript.dll” and click OK. Please note, if you are using Windows Vista temporarily disable the User Account Control (UAC). You can easily turn it back on. On the Control Panel (Category View) choose User Accounts and Family Safety, next choose User Accounts, and then click Turn User Account Control on or off.download reginout that may easily solve it

Depending on the age of your tv, if you hear a rapid clicking, it seems like your ballast is starting to turn on your tv but it's not able to. (1) Check your lamp, (2) reset the lamp timer, (3) make sure the cover panel is all the way. the positioning sensor might not be detecting the cover all the way in.
Personally I think you're experiencing a ballast problem.

may be your xternal hardrive wasnt alocated..

try to allocate it

start>my computer (right click select manage)>click disk managment ( look at the right area below) > see the black line with non allocated> right click then allocate > select extended then next .. the black line will turn into green.. you hard drive now could recognized with your pc.

Normal 0 Go into the messenger and go CLICK on GENERAL and then CLICK on PREFERENCE.
Then under “When I Start My Computer” and remove the check from “Automatically Start Yahoo Messenger”. Then click OK.
It should be similar in other messengers to keep it from starting when Windows starts.
Hope this helps. Bud