Question about HP COLOR LASERJET CP 3505 N PRINTER

1 Answer

HP cp3505n. Message is to make sure the fuser is correctly inserted. To push all the way until it clicks. I have but the error is the same. I really need to print. How can I pull it apart? Please help. My email is houtax@hotmail.com. Thanks!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 1,915 Answers

Have you power cycled the pirnter. usually if you are going to remove the fuser on this model you need to ensure that the power is off. If you have another fuser you will want to trouble shoot like that

Posted on Mar 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

59 co error


An error occurred with the developing
separation-drive assembly.
1. Check that the following connectors on
the driver PCA are seated correctly:
J403, J405, J213.
2. Check that connector J1020 on the DC
controller is seated correctly.
3. Check that connector J5008 on the
fuser motor is seated correctly.
4. Replace the developing separationdrive assembly.
5. Replace the memory-controller PCA.
6. Replace the fuser.
reseat fuser - something may be binding causing error

Oct 08, 2013 | HP COLOR LASERJET CP 3505 N PRINTER

1 Answer

My hp color lasejet cp 3505n show the follow message at the boot "INFLATE FAILURE SEND RFU UPGRADE" and nothing dont work


Hello,

This error message occurs when there is an internal hard ware failure. Please send the unti in for repairing it.

Thanks and Regards,

Dr Tony

May 04, 2011 | HP LaserJet CP3505n Printer

1 Answer

I am getting 50.1 fuser error on my printer cp3505n any advise


50.1 is 'low fuser temperature'
I'm assuming that you haven't been messing around with the fuser.
The book says to upgrade the DC Controller firmware.
If that doesn't work, replace the DC Controller

Go to www.hp.com/#support to find your printer and its downloads

Jan 30, 2011 | HP COLOR LASERJET CP 3505 N PRINTER

1 Answer

I just replaced the Fuser as well as a new Toner cartridge in my HP Laserjet P3005. Getting an error message after initializing that states "13.20.00 Jam Inside Rear Bin". I've taken it all back apart and...


First, make sure that both wire connectors on the right side of the fuser are seated correctly.
Then, see if there is paper sticking a little way out of the fuser. If so, chances are the exit sensor in the fuser is not functioning correctly.
You can put the old fuser back in and verify this if no error codes come up.

Oct 25, 2010 | HP LaserJet P3005d Printer

1 Answer

HP5600 print cartridge- error- message


http://cluetechnologies.com/index.php?topic=688.0
Insert the correct CD
Windows Users:
a Insert the gray HP All-in-
One Macintosh CD.
b Continue to the next page.
a Insert the green HP All-in-One
Windows CD.
b Follow the onscreen
instructions to install the
software.
c On the Connection Type
screen, make sure to select
directly to this computer .
Continue to the next page.
Note : If the startup screen does not appear after you
insert the CD, double-click My Computer , doubleclick
the CD-ROM icon, and then double-click
setup.exe .

Jul 01, 2010 | HP Officejet 5610 All-In-One InkJet...

4 Answers

I have a 50.2 fuser error. What does that mean


Loose fuser tabs on the HP LaserJet 4000/4050/4100 - a potential 50.2 error If you experience a "50.2" fuser error while using a LaserJet 4000, 4050, or 4100 fuser, you should check to see if two tabs on the fuser have come loose. (They can get dislodged during shipping or during istallation.)
Turn your printer off and remove your fuser. Flip it to the gear side (the left side) and press inwards on the fuser tab to make sure it is fully clicked in place, as shown below.
4000fuserleftside.jpg
Then flip the fuser over to the right side (the non-gear side) and press in on the other fuser tab to make sure it is also fully clicked in place.
(right side of a LaserJet 4000/4050 fuser pictured below)
4000fuserrightside.jpg (right side of a LaserJet 4100 fuser pictured below)
4100fuserrightside.jpg

Mar 31, 2010 | HP LaserJet 4200 Printer

1 Answer

Fuser 50.1 error on HP 3500 printer


From HP Website:
50.X FUSER ERROR Description A fuser error has occurred. Action
  1. Turn the printer off.
  2. Verify the fuser is properly installed and fully seated.
  3. Turn on the printer.
  4. If the message persists, contact HP Support.

Mar 23, 2009 | HP Color LaserJet 3500 Printer

4 Answers

Hp 4350 error code 50.3


I have just changed the fuser unit and the printer is still giving the
same error [fuser error and low heating] Kindly help.

Maxwell Mpundu@technet.co.zm

Apr 21, 2008 | HP LaserJet 4350 Printer

Not finding what you are looking for?
HP COLOR LASERJET CP 3505 N PRINTER Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...