Question about Zyxel ZyAIR G-1000 802.11g/b (zyairg1000) Wireless Access Point

1 Answer

I had my xyxel g-1000 lan/wireless router connectiong to a desktop and laptop wirelessly. My internet provider is through a broadband modem, I had a change to my service to a lower speed, now I am only able to connect to one wireless device at a time. I have tried to reconfigure and found that the router is not releasing a 192. subnet anymore, now it is releasing the ip from the modem which is the provides ip.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 166 Answers

Looks like the router operation mode is configured as a "Bridge" now, change that to "Dynamic"

Good luck

Posted on Jan 18, 2012

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

veenu goel
  • 38 Answers

SOURCE: how to configure my tcp/ip TP-link access point

click on start
go to run

then type cmd
type ipconfig (in case of window)

Posted on Nov 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I dont know the wifi password -windows 7 of my broadband


When you power up the wireless router and the LEDs are ON then the router appears to be OK and this also applies to the DSL or cable wireless modem. To check if the modem is configured to your ISP settings and the modem connects to the Internet, connect the modem with a LAN cable to your laptop and check if you can get into the Internet. To connect to your wireless router, it needs the router's wireless settings configured and also needs the wireless cards in all the laptops and or computers to be configured with the router's wireless settings. Then the laptops and desktop computers can communicate with your wireless router. To set-up and secure the wireless router from unauthorized access, follow these steps: - 1, Connect the wireless router to your computer with a LAN cable.
2. Start your browser and enter the router's configuration URL IP address.
3. Enter the router setup, login and password
4. Change the admin password
5. Go to the wireless settings and change the default SSID and turn off SSID broadcast.
6. Setup encryption key the strongest is WPA2 (if not then WPA). The encryption key can be easily set up using a passphrase (it can be an alpha numeric phrase or words). 7. For further security measures - turn on MAC address filtering and enter the MAC address of the wireless cards on the computer/s you want to connect to this wireless router.
8. Record the settings you have made and keep it in a safe place and Save the settings.
9. Configure the wireless cards on the computer/s with the SSID and encryption settings of the router.
10. Remove the LAN cable between the router and the computer then the computers should be able to connect to the router wirelessly.

Jan 22, 2013 | Computers & Internet

1 Answer

How to change browser to allow conection to internet


To connect to the Internet you need a few extra things aswell as a network or wireless card and install the LAN or wireless driver.
1. You need to sign up with an Internet service provider.
2. Connect a LAN cable from your computer to the DSL or cable modem
3. You need a DSL or cable modem and connect and configure the modem to inaccordance with your Internet service provider's instructions.
4. Install Internet Explorer if it has not been done.
5. If everything has been done correctly, when you open Internet Explorer youcan access the Internet.If you have a wireless router and it is connected to the DSLor cable modem then -
To connect to yourwireless router, the router needs its wireless settings to be configuredwith the SSID, encryption key etc., also the wireless cards in all thelaptops/computers needs to be configured with these router's wireless settings.Then the laptops/desktop computers can communicate with your wireless router.

Dec 27, 2011 | Computers & Internet

1 Answer

I cant get this sylvania 7 smartbook , model # synet07wicv to get internet.


To connect to the Internet you need a few extra things aswell as a network or wireless card and install the LAN or wireless driver.
1. You need to sign up with an Internet service provider.
2. Connect a LAN cable from your computer to the DSL or cable modem
3. You need a DSL or cable modem and connect and configure the modem to inaccordance with your Internet service provider's instructions.
4. Install Internet Explorer if it has not been done.
5. If everything has been done correctly, when you open Internet Explorer youcan access the Internet.If you have a wireless router and it is connected to the DSLor cable modem then -
To connect to yourwireless router, the router needs its wireless settings to be configuredwith the SSID, encryption key etc., also the wireless cards in all thelaptops/computers needs to be configured with these router's wireless settings.Then the laptops/desktop computers can communicate with your wireless router.

Dec 25, 2011 | Sylvania G-Netbook

2 Answers

Dear Sir, There is no provision of fixing my laptop to a wireless router.Can anybody advise how to convert this "laptop" to enable getting wireless connection of internet?


To connect to the Internet you need a few extra things aswell as a network or wireless card and install the LAN or wireless driver.
1. You need to sign up with an Internet service provider.
2. Connect a LAN cable from your computer to the DSL or cable modem
3. You need a DSL or cable modem and connect and configure the modem to inaccordance with your Internet service provider's instructions.
4. Install Internet Explorer if it has not been done.
5. If everything has been done correctly, when you open Internet Explorer youcan access the Internet. If you have a wireless router and it is connected to the DSLor cable modem then -
To connect to yourwireless router, the router needs its wireless settings to be configuredwith the SSID, encryption key etc., also the wireless cards in all thelaptops/computers needs to be configured with these router's wireless settings.Then the laptops/desktop computers can communicate with your wireless router.

Jul 29, 2011 | Dell Inspiron 5100 Laptop

1 Answer

How a conect to internet


METHOD 1 - Using Internet connection using DSL or cable connection.
1st. If you wish to connect to the Internet with a LAN cable or a wirelessly and if your computer doesn't have a LAN card or wireless LAN card you need to purchase a LAN card (to configure the wireless router) and if you want a wireless connection you will also need to purchase a wireless LAN card.
2nd. You need to select an Internet Service Provider in your area with a plan and cost to suit your requirements.
3rd. You need to decide what type of broadband connection you need, DSL or cable modem with or without a built-in wireless router, the Internet Service Provider can assist you with this.
5th. The Internet Service Provider can supply these items or advise you what make and model to purchase. They will also provide information on how to connect and setup your Internet connection.

METHOD 2 - Using USB wireless adapter that plugs into the laptop's USB port. It doesn't need a wireless router or a cable or DSL modem.
This is used mostly on laptop computers which allows Internet access anywhere the Internet Service Provide has a wireless transmitter. It uses the G3 mobile system.
This type of service usually costs more and again you need to select an Internet Service Provider that can provide the wireless coverage, the plan and costs that suit your requirements.
Installation and setting up information is supplied by the ISP.


Jul 31, 2009 | Computers & Internet

1 Answer

Heyyy i have take tosiba model L300 wireless len drivers so wht can i do????


You need an Internet Service Provider and a wireless router and a broadband DSL or cable modem. The DSL or cable modem could have a built-in wireless router, this modem could be included in the broadband plan from the Internet Service Provider.
1. You need organise an Internet Service Provider, they should provide configuration settings, password, and e-mail info etc.
2. Install the hardware device and wireless LAN drivers. If you have not got these drivers, download them from the Toshiba WEB site. Make sure you select your model laptop and the XP or Vista versions of the drivers that match the Windows version on your laptop.
3. Follow the Internet Service Provider to configure your LAN card, and E-mail program.
If you follow the instructions correctly you will be able to connect to the Internet and send and receive E-mails.

Jul 03, 2009 | Toshiba Satellite Pro L300 Notebook

1 Answer

Connecting a wireless router to Tiscalli broadband connection


  1. USB modem is connecting a PC USB port with a DSL phone line: CANNOT be connected to a ROUTER LAN (ethernet NOT USB port).
  2. Wireless ROUTER is NOT a modem and it CANNOT connect the Internet (or WAN) LAN port to any "phone line"
  3. Connect the Router Internet (WAN) port to Modem (you need a LAN MODEM = a modem with a LAN/ETHERNET port)
  4. Be sure your internet is running before strting ROUTER configuration with Router Company CD

Jan 05, 2009 | 3Com 7760 (3CRWE776075US) 802.11a/b/g...

1 Answer

Wireless router says its working laptop says no its not


Your sister was accessing the wireless access point at school which is connected to the Internet/WEB access via a router and the school's broadband service provider.
For you to access the Internet using your wireless adapter on your laptop, you need your own wireless access point and connect it to a broadband ADSL or cable modem and then connect it to an Internet Service Provider. Some Internet Service Providers (cable and ADSL) can supply a combined modem/router/wireless Access point.
If you already have a broadband modem all you need is a wireless access point/router. You only need to configure the wireless access point and your wireless adapter so they will communicate with each other. Folow the instructions in the manuals.

Dec 07, 2008 | NetGear WGR614 Wireless Router

1 Answer

USB Broadband to wireless router through desktop PC


If I get you right you are useing a 3g Internet connection and have a router wich conets the 2 computers together, the problem is that you can't share the internet connection.
Without any information about the operateing systems I can tell you the idea:
First you need to disable DHCP server on the router and use static IP addresses on both PC, the IP address should be something like

PC1:
IP: 192.168.0.2
Network mask:255.255.255.0

PC2:
IP: 192.168.0.3
Network mask: 255.255.255.0
Default gateway: 192.168.0.2

In this IP configuration above PC1 has the 3g modem connected.
This was the easy part, hard part is to share the internet connection on the network, that's a little different ritual on every operateing system, try to use google to get your specific one.


However there's a much more easier way to solve all your problems if you can't make it work, but it costs money. All you need to buy is a 3G router and that will do the same thing for you what your old router did.
I did a little search for you on Australian Ebay to see what you can get.
But I'm sure you have your own cheapbfavourite source of computer hardware as well.


Hope this will help you sorting out your porblem.

Regards
Imre

Nov 26, 2008 | Sabrent USB 2.0 NT-USB20 Ethernet Adapter

1 Answer

Linksys Wireless-G BroadBand Router


Who is your ISP (Internet Service Provider)?

If you're using a Cable provider, do the ff. steps. (For Linksys router)

1. Launch Internet Explorer and type http://192.168.1.1
2. It will prompt you for username and password. Leave it blank on username and type admin for the password.
3. Under SETUP tab, click the sub-tab MAC Address Clone. The click the button Clone My PC's MAC. Then click on Save Settings.
4. Unplug the power to the modem and the router for 30 secs. After that, power on the modem first, wait for all lights to go solid then power on the router. Check if the internet works.

Hope this helps.

Jul 19, 2008 | Linksys Wireless-G Broadband Router

Not finding what you are looking for?
Zyxel ZyAIR G-1000 802.11g/b (zyairg1000) Wireless Access Point Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zyxel Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mark

Level 2 Expert

105 Answers

Are you a Zyxel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...