Question about Emerson EWD7003 DVD Player
I have a Samsung TV and remote. I want to program my DVD player which is an Emerson (Ewd7003) to work with my TV’s remote. If someone could give me some advice that would be grate!
I have the same dvd player & the remote went dead. I have been searching & finall found a web site that will help you. The short of it is I have a ATT 200 universal remote that my son gave me & I looked that up on remote.com & it has all kinds of Q&A to research, and I found out if I press my AUX button till all 4 modes flash twice, I can press HELP button & the next set of flashes are actually the code.It is called code scan. Not sure all remotes have this feature, but worth looking into. Hope you find your code. Happy New Year!!
Posted by; TMazzucchi
Posted on Jan 01, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Aug 11, 2016 | Emerson Televison & Video
Dec 26, 2012 | Samsung DVD-HD841 DVD Player
Apr 25, 2012 | Emerson EWD7003 DVD Player
Jan 06, 2012 | Sony Televison & Video
0154, 0236, 0463, 0180, 0178,
The One For All 4 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, a Motorola cable
box, and an RCA VCR.To control devices other than the default brands,perform
the following steps; otherwise skip this section:
 Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
 On the remote control,press a device key once (i.e., VCR/PVR,
DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press VCR/PVR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD once.After programming
a DVD Combo device, you will be able to control channel selection,
volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
 Press and hold SET until the LED (red light) blinks twice,
then release SET.
 Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
 Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next
NOTE: If the device does not have a POWER key, press PLAY
Sep 26, 2011 | One For All URC-3021 Remote Control
Oct 31, 2010 | Emerson EWD2202 DVD Player/VCR
Jan 30, 2010 | Emerson EWD7003 DVD Player
Mar 21, 2008 | Emerson EWD7003 DVD Player
Mar 19, 2008 | Emerson EWD7003 DVD Player
Oct 28, 2007 | Emerson EWD7003 DVD Player
Nov 19, 2008 | Emerson EWD7003 DVD Player
251 people viewed this question
Usually answered in minutes!