Question about Timex Atlantis 100 77511 Wrist Watch

Open Question

Alarm does not work ? - Timex Atlantis 100 77511 Wrist Watch

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced batteries in Casio Pathfinder watch. Functions work, but alarm does not sound.


there are two reasons for this while changing the battery the small coil sping that operates the alarm as fell out or you av put the back on in the wrong position

Jan 20, 2013 | Watches

1 Answer

Timex expedition wr100m alarm


TURNING OFF A TIMEX IRONMAN (the wr100m is the one I made this work on) ALARM: hold "set" to set each alarm to "on," not "hide." exit. flip through the modes until each alarm shows. don't hit "set," hit "start" or "stop." it should then switch from showing as daily or whatever to showing as OFF! good luck. so, UNHIDE, SHOW ALARM, DON'T SET, STOP -> OFF.

May 04, 2012 | Timex Expedition Watches

1 Answer

Alarm won't turn off on Zoo York watch.


I have a different model but this solution came up in Google and it didn't work. On mine, I tried the following: press MODE. It will show the alarm time. Then press ST/SP a few times until the little alarm icon does not show on the alarm face. If you press RESET instead of ST/SP, it will start blinking and will want you to change the alarm time instead.

Mar 14, 2012 | Watches

1 Answer

I just replaced the battery on my seiko. Watch is working fine EXCEPT the alarm will not ring. Help!


mcdevito75 here, By pressing the MODE button until you get to the alarm function and turn it to on or, set an alarm time for the alarm to go off.

Oct 11, 2010 | Seiko Coutura Chronograph Watch

1 Answer

On the casio a158w how do I turn off the hourly chime? Thank-you


Hi Ms. Sophie Desro,

If the alarm has sounded, press "A" (top left-hand button) to stop the sound.
To switch the Daily and Hourly Time Signal on and off:
Press "C" (lower right-hand button) while in alarm mode in sequence:
a. }}}} + BELL = Both alarms on.
b. Display Blank = Both OFF.
c. }}}} = Daily alarm on only.
d. BELL = Hourly Time Signal on only.

Test the alarm by holding down "C" to sound the alarm.
Please note b. and c. to turn off the alarms.

For more information, Casio has an Operational Chart for your watch, Module QW-1275. You may download a PDF file here:
http://ftp.casio.co.jp/pub/world_manual/wat/en/qw1275.pdf

Try this and let me know if this works. Thanks.

Regards, Bill

Sep 16, 2010 | Casio DW290 1V Classic Alarm Chronograph...

2 Answers

How do I enable the alarm on the Eddie Bauer world travel clock with flashlight? I can set the alarm time but I do not know how to enable it. I set it by 2 minutes ahead of the current time and waited for...


From the normal time position, press Mode and the AL function will come up which is where you set the alarm. Instead of pressing SET, press the up arrow. Each time you press the up arrow it changes function. When the alarm function is on a little bell appears above the colon in the time. The snooze has a ZZ that appears below the colon.The unique feature of this clock, is that it is the only one I have seen where the alarm works in the time zone selected. Most others, the alarm only works the home time zone, not the selected time zone. This is a huge improvement.

Dec 24, 2009 | Eddie Bauer Watches

1 Answer

Need help setting the alarm


yes,I have a diffrent watch but it might still work.First you have to hold mode for 5 seconds and then the alarm will show up and you set it if it dose not work tell me.

Mar 29, 2009 | Watches

1 Answer

Sector 250 Chronograph Alarm


the middle dial on the right side of the watch is used to switch from watch settings to alarm settings..
pull the middle dial out to put it in alarm mode.
To set alarm:
-pull the center knob out.
-with it out you can now use the bottom (right) knob to set the alarm.
-pull the bottom right knob out one notch
-turn the knob clockwise or counter clockwise to set the alarm time
-push the knob back in (all the way)

the alarm is now set

if the center (right) knob is pulled out the alarm is ON
if the center (right) knob is pushed in the alarm is OFF
--------------------------------------------------------
I have owned this watch for about 10 years now and love it.
the past few years the chronograph buttons (on the left side of the watch) were not working well rendering the chronograph and count down timer functions unusable.

repairing a chronographs is expensive and watch makers usually charge several hundred dollars which is not a feasible fee for a watch of this value so i decided to open it up my self and clean it up and that did the trick.. its working like new!

enjoy the watch!

Dec 11, 2008 | Sector 2653940025 Wrist Watch

1 Answer

Citzen Aqualand 1997 Divers watch..Great condition!!


the alarm works by a spring rubing on the back of the base plate of the watch if this spring is bent or not in the right place the alarm will not work

Nov 02, 2008 | Citizen Aqualand Duplex JP104009E Wrist...

5 Answers

Unwanted alarm


using the button at bottom left of watch, set to the alarm mode and press the button at bottom right to toggle between alarm settings. The bell and wave symbols will appear and disappear on top left of watch display.

Jan 08, 2008 | Oregon Scientific SE233 Wrist Watch

Not finding what you are looking for?
Timex Atlantis 100 77511 Wrist Watch Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Timex Watches Experts

Ross Keen

Level 3 Expert

1231 Answers

freddyfox

Level 2 Expert

236 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Timex Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...