Question about Sagem Wi-Fi 11g USB adapter

1 Answer

When I look at the adapter in device manager, it says the device could not start and displays error code 10

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 137 Answers

  1. Sagem is now SAFRAN
  2. Go to SAFRAN Web Site
  3. Click <Atlas>  (north or south America, etc.)

Apparently, their drivers are archived, the only option I see, short of buying one of those Update All Your Driver programs, that will be your best and SAFEST bet.

 

I cannot Guarantee information from a source other than the Manufacturer.  I have, however, searched 30 + sites, for you.  The only link I found, not trying to sell something which had this:   wifi-usb-dongle-drivers/"> your Driver is here.  

 

Because of the difficulty in locating this, particular, driver. I tested the download, for you, myself and it is safe; I don't have your wireless adapter so I can't test it, but I can tell you the downoad is safe.

 

wifi-usb-dongle-drivers/">http://www.wireless-driver.com/sagem-xn720s-wifi-usb-dongle-drivers/

 

Thank You For Choosing FixYa~!

 

Posted on Mar 17, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is teredo tunelling adapter code 10?


Step 1

a. Click on Start, in the start search box type CMD,
b. In the list right click on CMD and click on Run as administrator.
c. Enter netsh environment. Type "netsh" and ENTER.
d. Again type "int teredo" and ENTER
e. Type "set state disabled" and ENTER.
f. Open Device Manager and uninstall "Teredo Tunneling Pseudo-Interface".
g. Open command prompt with administrator credentials once again.
h. Type netsh + ENTER.
i. int ipv6" + ENTER.
j. Type "set teredo client" + ENTER.

Open Device Manager and Scan for new hardware and select "Show hidden devices" from the View menu and check if you find any errors.

Feb 05, 2015 | Microsoft Computers & Internet

1 Answer

Dvd player doesn t work


The Code 10 error is one of several Device Manager error codes. The Code 10 error will almost always display in the following way:
"This device cannot start. (Code 10)"
Details on Device Manager error codes like Code 10 are available in the Device Status area in the device's properties: How To View a Device's Status in Device Manager.
Important: Device Manager error codes are exclusive to Device Manager. If you see the Code 10 error elsewhere in Windows, chances are it's a system error code which you should not troubleshoot as a Device Manager issue.
Cause of the Code 10 Error
A Code 10 error is generated when Device Manager can't start the hardware device, a situation usually caused by outdated or corrupted drivers.
A device may also receive a Code 10 error if a driver generates an error that Device Manager doesn't understand. In other words, a Code 10 error can sometimes be a very generic message indicating some kind of unspecified driver or hardware problem.
Error Code 10 Troubleshooting
1.Restart your computer if you haven't done so already.
There is always the chance that the error Code 10 you're seeing on a device was caused by some temporary problem in Device Manager or with the hardware. If so, a reboot might fix the Code 10 error.

2.Did you install a device or make a change in Device Manager just before the Code 10 error appeared? If so, it's very possible that the change you made caused the Code 10 error.
Undo the change if you can, restart your PC, and then check again for the Code 10 error.
Depending on the changes you made, some solutions might include:
•Remove or reconfigure the newly installed device.
•Roll back the driver to a version prior to your update.
•Use System Restore to undo recent Device Manager related changes.
3.Reinstall the drivers for the device. Uninstalling and then reinstalling the drivers for the device is a likely solution to a Code 10 error.
Important: If a USB device is generating the Code 10 error, uninstall every device under the Universal Serial Bus controllers hardware category in Device Manager as part of the driver reinstall. This includes any USB Mass Storage Device, USB Host Controller, and USB Root Hub.

Sep 14, 2013 | Dell Dimension E510 PC Desktop

1 Answer

F5d7010 network card error code 10 how to fix manually


Make sure you have the correct drivers installed for the correct hardware version.
NOTE: Older hardware version may not be compatible with current Windows.

Ref: http://www.belkin.com/us/support-article?rnId=302

Also follow: http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isnt-installed-properly

Dec 18, 2012 | Belkin (F5D7010) 802.11a, 802.11g/b...

1 Answer

My realtek rtl8101 ethernet card does not start show an error code:10 on the device manager


Is this a network adapter that's internal to the motherboard? If so, you need to download and install the drivers from the board manufacturer.


Hold the Windows key and press R, then type devmgmt.msc

Please respond to all the following steps.
  1. Under Network adapters, please tell me all the devices listed.
  2. Are there any devices under Network adapters that have a red x displayed?
  3. Also, are there any devices anywhere in the Device Manager display with yellow ? or ! displayed?

If so you have to download all the drivers and install them.


You can contact me for further assistance

Jun 20, 2011 | Computers & Internet

2 Answers

Webcam not working in dell inspiration n5010. lexmark x 422 error code 10 is displaying in devicemanager.


HI
A Code 10 error is generated when Device Manager can't start the hardware device, a situation usually caused by outdated or corrupted driver A device may also receive a Code 10error if a driver generates an error that Device Manager doesn't understand. In other words, a Code 10 error can sometimes be a very generic message indicating some kind of unspecified driver or hardware problem. Uninstalling and then reinstalling the drivers for the device is a likely solution to a Code 10 error. If reinstalling driver is not working than try to rollback the driver or restore the system on previous date..

regards
sandy fixya

May 30, 2011 | Lexmark International Lexmark X422

1 Answer

CODE 10 ON TSST l632@ VISTA os


This is from Microsoft and is from their code explanation page.

Code 10 loadTOCNode(2, 'moreinformation'); If the device has a "FailReasonString" value in its hardware key, that string is displayed as the error message. The driver or enumerator places this registry string value there. If there is no "FailReasonString" in the hardware key, the following generic error message is displayed:
This device is either not present, not working properly, or does not have all the drivers installed. (Code 10)

Try upgrading the device drivers for this device.
Solution button: Update Driver

To resolve this error code, make sure the device is connected to the computer correctly. For example, make sure all cables are plugged in fully and that all adapter cards are properly seated. Follow the suggested solution button and update the device driver. It may be possible to remove the device and redetect it using the Add New Hardware wizard.

Jan 15, 2010 | HP Pavilion DV6700T Notebook

1 Answer

Microsoft 6to4 adapter. Device cannot start code 10 error


try uninstalling these devices remove anything conected to laptop and restart. might help

Dec 03, 2009 | HP Pavilion dv2000t 14.1" Notebook Laptop...

1 Answer

Broadcom network adapter has code 10


Try to update its drivers. Go to the Device Manager. In the device Properties dialog box, click the Driver tab, and then click Update Driver to start the Hardware Update Wizard. Follow the instructions to update the driver.

You may be prompted to provide the path of the driver. Windows may have the driver built-in, or may still have the driver files installed from the last time that you set up the device. If you are asked for the driver and you do not have it, you can try to download the latest driver from the hardware vendor’s Web site.

How to go to Device Manager:

1. Right-click on My Computer on the desktop and then click on Properties. Then click on the Hardware tab and then Device Manager button.
2. Double-click on Network Adapter. Double-click on your network adapter to view its properties.
3. Look for the Device Status or any error message. If it says "This device is working properly" then the adapter is properly installed.


Jul 17, 2009 | Broadcom BCM5721 NetXtreme Ethernet...

1 Answer

Fast ethernet LAN drivers not installed and gives error code 10


Go to setting,control panel,system,device manage then click the network adapter,then properties,in resources uncheck the box "use automatic settings" then click the change setting then "edit input/output range" and try using other value with no conflicting device then click ok.Then go back to device manager and check if the yellow exclamation point is still there

Apr 18, 2009 | Computers & Internet

1 Answer

Router " won't start"


Code 10 loadTOCNode(2, 'moreinformation'); If the device has a "FailReasonString" value in its hardware key, that string is displayed as the error message. The driver or enumerator places this registry string value there. If there is no "FailReasonString" in the hardware key, the following generic error message is displayed:
This device is either not present, not working properly, or does not have all the drivers installed. (Code 10)

Try upgrading the device drivers for this device.
Solution button: Update Driver

To resolve this error code, make sure the device is connected to the computer correctly. For example, make sure all cables are plugged in fully and that all adapter cards are properly seated. Follow the suggested solution button and update the device driver. It may be possible to remove the device and redetect it using the Add New Hardware wizard.

I am sorry that we got disconnected in the chat. Please don't hesitate as I will assist you at anytime. I believe their chat session software is not working with the new firefox.
Thanks,
Lee

Jun 18, 2008 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Computers & Internet Logo

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sagem Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Sagem Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...