Question about Bosch 11387 10 Amp Round Hex Demolition Hammer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The switch plate must be pryed off very carefully. Pry off the top part of the plate if the tool is upright. Start on one side then switch the tool on (unplugged) and pry off the other side. Not a very good system but it can be done if you are carefull
Posted on Jan 13, 2010
Testimonial: "This information is very helpful...Thank you! Les McClane"
SOURCE: bosch demo hammer model 11304
Your hammer has brushes that push away from the armature when they wear past a certain point. At this time you could buy the service kit that includes most parts including grease to get your going again. The link below will give you an idea of the parts included in the kit. If however you store your hammer more than use it, you could pull the lower half and lube it. You can just order Bosch grease. If your hammer is used constantly / heavy / hot climate, you can increase the life of the tool by greasing more often. Most damage is done by using long cord or generator with too high or too low voltage. Good luck
Posted on May 28, 2011
Tips for a great answer:
Dec 26, 2011 | Makita HM1500B 42 Lb. Demolition Hammer
Jul 06, 2011 | Bosch 11241EVS 1916" SDSMax Combination...
May 28, 2011 | Hammering
Nov 16, 2010 | Bosch Drills
Oct 27, 2010 | Bosch Brute Breaker Hammer 11304
Mar 27, 2010 | Bosch Drills
Jan 15, 2010 | Bosch SDS-plus BULLDOG Xtreme Rotary...
Jan 10, 2010 | Bosch SDS - max Demolition Hammer 11316EVS
Jul 04, 2009 | Hammering
196 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: