Question about Kenwood Car Audio & Video

1 Answer

How to set up clock on kenwood kdc 138 - Kenwood Car Audio & Video

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 50 Answers

Hello... sorry to hear you are having problems. The correct procedure is to press the "SRC" button and put the player in standby "STBY" mode. Once in standby mode, press the small button labeled menu on the bottom right corner and hold it for 2-3 seconds. "CLK" will appear. Press the small button inside of the "square" on the right side of the radio and hold it for 2-3 seconds. The clock will appear and will be flashing. Use the up and down arrows on the "square" to change the hour and the left and right on the "square" to change the minutes. After you get it set, press the menu button once more on the bottom right corner and it will take you back out of the menu. Hope this helps!!

20 year car audio/video installer
Bay manager

Posted on Mar 17, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Everytime I turn on the truck my kenwood kdc-138 goes into standby mode How can I get it to stop going into it


You need to wire in a constant power use your meter and turn the key off and look for constant 12v power with the key off that is the wire that runs your memory clock,presets etc..

Aug 27, 2012 | Kenwood KDC-138 FM / AM Receiver

1 Answer

How to set the clock


Press the B.Boost button (all the way to the right of the button cluster along the bottom of the receiver) for at least a second until the menu is displayed. Press the top and bottom sides of the control knob to select CLCK. Press the center of the control knob for at least a second (the clock display will blink). Then use the top and bottom sides of the control knob to set the hours and the left and right sides of the control knob to set the minutes. Then press the B.Boost button to exit the clock adjustment mode.

The owner's manual for the KDC-138 is available here: http://www.kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/kdcmp238.pdf .

I hope this helps.

Cindy Wells

Mar 29, 2011 | Kenwood KDC-138 FM / AM Receiver

2 Answers

Set the clock on KDC-138 car stero


hi if you click on this link it will bring up the instruction manual for your model. as well as the 238.
setting the clock is on page 10
hope i have helped, please dont forget to rate.

Jan 12, 2011 | Kenwood KDC-138 FM / AM Receiver

1 Answer

How do you set the clock?


p.11/56 in the user manual explains specifically how to manually adjust the clock. Here is the manual:
http://dl.owneriq.net/c/c45b01b8-349f-c204-e5a9-fc90617d7c67.pdf
Thank you and enjoy,
Lee

Aug 19, 2010 | Kenwood KDC-138 FM / AM Receiver

1 Answer

HOW DO I SET THE CLOCK?


control panel then set the clock simple

May 07, 2010 | Kenwood KDC-138 FM / AM Receiver

2 Answers

Don't know how to set clock on kenwood kdc-138 without manual


change the tune mode to standby mode. Then press menu button for few second until clock word is displayed on the screen. Afterward, press the center of the main control button on the right side of the stereo system. The time is now blinking and you can start set the time by pressing upward & downward button for hour and left & right button for the minute

Mar 14, 2010 | Kenwood KDC-138 FM / AM Receiver

1 Answer

How do i set loud on my kenwood kdc 138


CLICK HERE for your manual.

There is no "LOUD" function for this radio.
There is a Bass Boost setting (found on page 4 of the manual).


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Dec 20, 2009 | Kenwood KDC-138 FM / AM Receiver

2 Answers

Subwoofer option on my kenwood kdc 138 receiver


go to kenwood wesite to down load instruction manuals

Sep 13, 2009 | Kenwood KDC-138 FM / AM Receiver

1 Answer

KENWOOD KDC-138 SET THE CLOCK


set the unit to standby and press and hold the select button.(the up,down,left, right button on the left of the cdplayer)

Sep 08, 2009 | Kenwood KDC-138 FM / AM Receiver

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4861 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...