Question about Computers & Internet

1 Answer

Not optimum mode appears on screen - Computers & Internet

Posted by on

  • jb4841 Aug 02, 2008

    I am using a Mac Power Book G4 and using the SyncMaster 2234DW Samsung screen as a TV screen and a screen to watch TV using EyeTV on the computer. I am doing this because i live in a remote area and sometimes the EyeTV gives better reception.


    Everything was working all right until a couple of days ago when the message "Not optimum mode" came up. It gave the figures 1680X1050 which is the optimum mode for 22' screens given in the instructions which is what I have selected on the computer for the screen when i use it.


    The message now comes up every time I switch the screen on. It stays there for a couple of minutes. I don't know if it is telling me that the 1680X1050 is wrong or if it isn't working at that mode.


    I think the screen isn't as clear as it was but this may only be my imagination. Also, I have different display profiles for the computer laptop screen and the Samsung screen.


    It doesn't give clear instructions for setting or resetting the screen mode in the instructions (other than initial set-up) which is only a folded sheet of paper, not a booklet.


    Even if i can stop the message from coming up it would be a help.


    jb4841


    (John Bright)


    Hope you can help



×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 125 Answers

Please clarify question, the Computer you are using and what you are trying to do.

Posted on Aug 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the aperture when my camera is in manual mode


You have to hold down the exposure compensation button at the same time as turning the control dial.
The values appear on the control panel screen.

I found this on page 33 of the manual...
Set the mode dial to M and turn the control dial to set the value.
• To set the shutter speed: Turn the control dial.
To set the aperture value:Turn the control dial while holding down the
[+-](exposure compensation) button.

The exposure level indicator appears on the control panel screen, showing the difference (ranging from -3 EV to +3 EV) between the exposure value calculated by the currently selected aperture
and shutter speed compared to the exposure value considered optimum by the camera.

Oct 13, 2014 | Olympus EVOLT E-410 Digital Camera

2 Answers

Geen beeld opmerking :not optimum mode


comes on and screen says optimized mode 1280x1024 60hz i put it on and get no video

Jan 23, 2010 | Samsung SyncMaster 910T 19" LCD Monitor

1 Answer

Lcd montor not working help


Hi there,
Symptom : No images on the screen. I cannot turn on the monitor.

Checklist 1 : Is the power cord connecte properly.
Action : Check the power cord connection and supply.

Checklist 2 : Can you see "Check Signal Cable" on the screen ?
Action : (Connected using the D-sub cable)
Check the signal cable connection.

Checklist 3 : If the power is on, reboot the computer to see the initial screen (login screen), which can be seen.
Action : If the initial screen( the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows ME/XP?2000) and then change the frequency of the video card.
Note : If the initial screen does not appear, contact the Service Center or your dealer.

Checklist 4 : Can you see "Not OPtimum Mode", "Recommended Mode 1440 X 900 60 Hz" on the screen.
Action : You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly.
Adjust the maximum resolution and frequency that the monitor can handle properly.


Checklist 5 : There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals ?
Action : The monitor is in Powersafe mode.
Press a key on the keyboard activate the monitor and restore the image on the screen.
If there is still no image on the screen, press the On button. Then press any key on the keyboard again to activate the monitor and restore the image on the screen.

Hope this helps.
Have a good day.

Dec 08, 2009 | Samsung SyncMaster 920NW Monitor

2 Answers

Screen stating not at optimum mode requesting 1280x1024hzm i have raedeon video card


Samsung syncmaster 170n monitor shows black with screen stating not at optimum mode requesting 1280x1024hzm , how do I fix this?

Oct 15, 2009 | Computers & Internet

1 Answer

Floating box non optimum mode recommended mode


You need to adjust the Display screen resolution.

  1. Control Pannel
  2. Display
  3. Settings
  4. Screen Resolution

Sep 22, 2009 | Samsung Computers & Internet

2 Answers

''not optimum mode'' icon continues to show


this is not the problem with your monitor. Pl boot your computer with enable vga mode. in vga mode set your resolution into 1680 x 1050 with which color mode you need set ok
it will be ok. After restart, your computer will ok. even the problem retains, pl reinstall the video driver and try again. give me ur feedback

Aug 25, 2009 | Samsung SyncMaster T200 LCD Monitor

3 Answers

Screen blank


Sounds like its simply going into power save mode. Does your screen come back on when you move the mouse or press a key on the keyboard? Is the computer still on? Check your power options in control panel.

Nov 29, 2008 | Computers & Internet

3 Answers

Not optimum mode recommended mode 1024 x 768 60hz


Hook up a different monitor and set resolution to no higher than 1024 x 768. Samsung monitor will then work fine. It appears that something fails in the monitor and it will no longer support anything higher than this.

Mar 03, 2008 | Samsung 710V 17" LCD Monitor

1 Answer

Not optimum mode


change windows resolution and refresh rate to 1024 X768 and 60 Hz.
start->control panel->display->settings-> change the screen resolution to 1024 by 768 pixels-> advanced-> monitor->change refresh rate to 60 Hz-> ok-> yes -> ok.

Mar 03, 2008 | Samsung 710V 17" LCD Monitor

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...