Question about SkyScan 86709 Atomic Wall Clock

1 Answer

Our Skyscan atomic wall clock will not stay at the correct time since we had the daylight savings time. I replaced the battery because each day at noon it would randomly reset it self to the old time (1 hr earlier than it actually is). The battery replace didn't work and now it reset itself to 12:00 and I can't get it to set to any other time by pushing the buttons. Now it seems to be stuck. Please help if you can.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 604 Answers

Take the batteries out and leave them out for at least a minute. when you put the (new) battereis back in be sure that you have the correct time zone pushed and if there is a DST button or switch make sure that is pushed/set as well. place the clock with its back facing colorado and leave it overnight, it should reset itself ok.

Posted on Mar 17, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have an "SKYSCAN" atomic clock. seven days ago I replaced batteries. Has not reset as of yet.


Hello
Get into this link. You can see the user manual for your Skysacn atomeic clock here. You can adjust your clock according to it manual. OK.
http://www.atomicclocksstore.com/skyscan-atomic-clock-manuals

Nov 11, 2011 | SkyScan 86709 Atomic Wall Clock

1 Answer

How do I set my skyscan atomic clock


You don't. Just make sure that the rear switches are set for the correct time zone, and that the DST switch is set to the ON position (unless you're in an area that does not use Daylight Saving Time). Make sure that your batteries are fresh, and situate the clock so that the front (or back) is facing roughly in the direction of Ft. Collins, Colorado. Give it a couple of hours to find and sync with the time signal, and it will set itself.

Bill B

Jul 02, 2010 | SkyScan 86709 Atomic Wall Clock

1 Answer

I have a atomic clock and dont know how to set it


I have a skyscan Atomic clock model no 86730 and can't set it, every time i get it set, it goes back 1 hr, i need to know to set it to daylight savings time

Mar 17, 2010 | SkyScan 86742 Digital Atomic Wall Clock

1 Answer

My SIO/SCAN 31420E did not reset for daylight savings time and I can't find the instructions to reset


how do I change my atomic clock to eastern time zone. Or when I set my time does it automatically set to the correct time zone.

Nov 02, 2009 | SkyScan 86709 Atomic Wall Clock

1 Answer

How do I adjust the time zone. I set the clock and in a few days it is 3 hours earlier Pacific Time and I am in N. It is a skyscan atomic clock CN6 V00U. Thank you, Kent


Take out the batteries, let stand for about 30 sec replace batteries and reset clock, when ask if you want to auto set daylight time "yes", and continue.

Oct 16, 2009 | SkyScan 86709 Atomic Wall Clock

1 Answer

SkyScan 87801 how to reset time


Keep pushing the set button until dst shows on the date window then see the clock window it will read on or off press the + button for on or off.

Sep 15, 2008 | SkyScan 86709 Atomic Wall Clock

1 Answer

Atomic clock


There is a setting on the clock to turn on "DST"- daylight savings time feature. You have to push the set button on the back of the clock repeatedly until you see "DST" blinking. You should also see "OFF" blinking at that point indicating that the feature if turned off. If you now push "+" button on the back of the clock once it should show "ON" blinking instead of "OFF". Hope this helps.

FixerUpper

Nov 04, 2007 | SkyScan 86709 Atomic Wall Clock

Not finding what you are looking for?
SkyScan 86709 Atomic Wall Clock Logo

991 people viewed this question

Ask a Question

Usually answered in minutes!

Top SkyScan Home Experts

The Knight
The Knight

Level 3 Expert

74377 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Rick Goldsmith
Rick Goldsmith

Level 1 Expert

16 Answers

Are you a SkyScan Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...