I believe the current exchange rate is 1 euro = 40.0972 mauritian rupees. So, to find what 100 million eruo

are we times each side by 100,000,000 , thus, 100,000,000 euro = 4,009,720,000 mauritian rupees.

Posted on Mar 17, 2011

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

goodluck!

Posted on Jan 02, 2017

Hi, Jomel after doing a little research it appears that PDK engine parts for Kawasaki are high-quality high-performance racing parts. The heads are ported and polished with modified exhaust hole and high compression configuration. I tried to convert the prices of the parts which I believed to be in Rupee's but it did not make sense

heads and cylinders were 3.55 million rp converts to $53,056 so I can't tell if the products are cheap or expensive. Perhaps you can enlighten me in the comment section below. For more information about your question please click on the links below. Good luck and have a nice day. http://fjb.kaskus.co.id/product/527fc63319cb17512500000d/blokhead-cylinder-ninja-1855-pdk-gold-fullset-original-thailand-amp-murah

Jual silinder Cylinder head Ninja 150 PDK Gold Baru Blok Block Mesin Motor...

Motorplus Online Naikan Performa Tanpa Ngorek Modalnya Head dan Blok...

heads and cylinders were 3.55 million rp converts to $53,056 so I can't tell if the products are cheap or expensive. Perhaps you can enlighten me in the comment section below. For more information about your question please click on the links below. Good luck and have a nice day. http://fjb.kaskus.co.id/product/527fc63319cb17512500000d/blokhead-cylinder-ninja-1855-pdk-gold-fullset-original-thailand-amp-murah

Jual silinder Cylinder head Ninja 150 PDK Gold Baru Blok Block Mesin Motor...

Motorplus Online Naikan Performa Tanpa Ngorek Modalnya Head dan Blok...

Aug 13, 2016 | kawasaki Motorcycles

Try Euro Millions' Win-o-Meter tool online Euro Millions Win-o-meter; it's the green sliding bar at the top of the ticket.

Nov 28, 2013 | Office Equipment & Supplies

you may download Rupee.rtf file from internet..Place it in Start> Control Panel > Fonts....When u open an editor like MS Word...for rupee symbol select "Rupee" from font drop-down and for typing it use the key just above the tab key on ur keyboard. You are done.

Nov 16, 2011 | Logitech 967437-0403 Keyboard

1200,00,00,000 / 45 approx = 266,666,667 U$ approx 266 million.

Feb 21, 2011 | Computers & Internet

The average price of a Playstation Two is said to be around 100 US Dollars (99,99$) if bought in the USA, meaning around 4636 Indian Rupees, if that is what you asked.

May 19, 2010 | Sony PlayStation 2 Slimline Console

Dear,

you've use macro to this.

**Press Alt+F11**

it will open Microsoft Vsual Basic Editor.

Click on__Module in Insert Menu__ and paste the following codings:

**Function ConvRs(ByVal MyNumber)**

Dim Rupees, Paise, Temp

Dim DecimalPlace, Count

ReDim Place(9) As String

Place(2) = " Thousand "

Place(3) = " Lac "

Place(4) = " Crore "

Place(5) = " Arab " ' String representation of amount

MyNumber = Trim(Str(MyNumber)) ' Position of decimal place 0 if none

DecimalPlace = InStr(MyNumber, ".")

' Convert Paise and set MyNumber to Rupee amount

If DecimalPlace > 0 Then

Paise = GetTens(Left(Mid(MyNumber, DecimalPlace + 1) & "00", 2))

MyNumber = Trim(Left(MyNumber, DecimalPlace - 1))

End If

Count = 1

Do While MyNumber <> ""

If Count = 1 Then Temp = GetHundreds(Right(MyNumber, 3))

If Count > 1 Then Temp = GetHundreds(Right(MyNumber, 2))

If Temp <> "" Then Rupees = Temp & Place(Count) & Rupees

If Count = 1 And Len(MyNumber) > 3 Then

MyNumber = Left(MyNumber, Len(MyNumber) - 3)

Else

If Count > 1 And Len(MyNumber) > 2 Then

MyNumber = Left(MyNumber, Len(MyNumber) - 2)

Else

MyNumber = ""

End If

End If

Count = Count + 1

Loop

Select Case Rupees

Case ""

Rupees = "No Rupees"

Case "One"

Rupees = "One Rupee"

Case Else

**'Rupees = Rupees & " Rupees"**

Rupees = "Rupees " & Rupees

**End Select**

Select Case Paise

Case ""

**'Paise = ""**

Paise = " Only"

Case "One"

Paise = " and One Paisa"

Case Else

Paise = " and " & Paise & " Paise"

**End Select**

ConvRs = Rupees & Paise

End Function

'***************************************...

' Converts a number from 100-999 into text *

'***************************************...

Function GetHundreds(ByVal MyNumber)

Dim Result As String

If Val(MyNumber) = 0 Then Exit Function

MyNumber = Right("000" & MyNumber, 3) 'Convert the hundreds place

If Mid(MyNumber, 1, 1) <> "0" Then

Result = GetDigit(Mid(MyNumber, 1, 1)) & " Hundred "

End If

'Convert the tens and ones place

If Mid(MyNumber, 2, 1) <> "0" Then

Result = Result & GetTens(Mid(MyNumber, 2))

Else

Result = Result & GetDigit(Mid(MyNumber, 3))

End If

GetHundreds = Result

End Function

'***************************************...

' Converts a number from 10 to 99 into text. *

'***************************************...

Function GetTens(TensText)

Dim Result As String

Result = "" 'null out the temporary function value

If Val(Left(TensText, 1)) = 1 Then ' If value between 10-19

Select Case Val(TensText)

Case 10: Result = "Ten"

Case 11: Result = "Eleven"

Case 12: Result = "Twelve"

Case 13: Result = "Thirteen"

Case 14: Result = "Fourteen"

Case 15: Result = "Fifteen"

Case 16: Result = "Sixteen"

Case 17: Result = "Seventeen"

Case 18: Result = "Eighteen"

Case 19: Result = "Nineteen"

Case Else

End Select

Else ' If value between 20-99

Select Case Val(Left(TensText, 1))

Case 2: Result = "Twenty "

Case 3: Result = "Thirty "

Case 4: Result = "Forty "

Case 5: Result = "Fifty "

Case 6: Result = "Sixty "

Case 7: Result = "Seventy "

Case 8: Result = "Eighty "

Case 9: Result = "Ninety "

Case Else

End Select

Result = Result & GetDigit _

(Right(TensText, 1)) 'Retrieve ones place

End If

GetTens = Result

End Function

'***************************************...

' Converts a number from 1 to 9 into text. *

'***************************************...

Function GetDigit(Digit)

Select Case Val(Digit)

Case 1: GetDigit = "One"

Case 2: GetDigit = "Two"

Case 3: GetDigit = "Three"

Case 4: GetDigit = "Four"

Case 5: GetDigit = "Five"

Case 6: GetDigit = "Six"

Case 7: GetDigit = "Seven"

Case 8: GetDigit = "Eight"

Case 9: GetDigit = "Nine"

Case Else: GetDigit = ""

End Select

End Function

save this as as**ConvertRs.xla in Microsoft\AddIns folder**

now, you'll have to activate this AddIns:

in your Excel Worksheet select:

**Tools\Add.Ins...**

Check the ConvertRs option

now this will be used as User Defined Function.

you can insert it from the Function Options or just enter the following command in the desired cell where you want the result:

**=ConvertRs(Cell Reference)**

Cell Reference means where the number is available, you want to convert.

Try this and then tell me the responce.

Bhasker Kumar

you've use macro to this.

it will open Microsoft Vsual Basic Editor.

Click on

Dim Rupees, Paise, Temp

Dim DecimalPlace, Count

ReDim Place(9) As String

Place(2) = " Thousand "

Place(3) = " Lac "

Place(4) = " Crore "

Place(5) = " Arab " ' String representation of amount

MyNumber = Trim(Str(MyNumber)) ' Position of decimal place 0 if none

DecimalPlace = InStr(MyNumber, ".")

' Convert Paise and set MyNumber to Rupee amount

If DecimalPlace > 0 Then

Paise = GetTens(Left(Mid(MyNumber, DecimalPlace + 1) & "00", 2))

MyNumber = Trim(Left(MyNumber, DecimalPlace - 1))

End If

Count = 1

Do While MyNumber <> ""

If Count = 1 Then Temp = GetHundreds(Right(MyNumber, 3))

If Count > 1 Then Temp = GetHundreds(Right(MyNumber, 2))

If Temp <> "" Then Rupees = Temp & Place(Count) & Rupees

If Count = 1 And Len(MyNumber) > 3 Then

MyNumber = Left(MyNumber, Len(MyNumber) - 3)

Else

If Count > 1 And Len(MyNumber) > 2 Then

MyNumber = Left(MyNumber, Len(MyNumber) - 2)

Else

MyNumber = ""

End If

End If

Count = Count + 1

Loop

Select Case Rupees

Case ""

Rupees = "No Rupees"

Case "One"

Rupees = "One Rupee"

Case Else

Rupees = "Rupees " & Rupees

Select Case Paise

Case ""

Paise = " Only"

Case "One"

Paise = " and One Paisa"

Case Else

Paise = " and " & Paise & " Paise"

ConvRs = Rupees & Paise

End Function

'***************************************...

' Converts a number from 100-999 into text *

'***************************************...

Function GetHundreds(ByVal MyNumber)

Dim Result As String

If Val(MyNumber) = 0 Then Exit Function

MyNumber = Right("000" & MyNumber, 3) 'Convert the hundreds place

If Mid(MyNumber, 1, 1) <> "0" Then

Result = GetDigit(Mid(MyNumber, 1, 1)) & " Hundred "

End If

'Convert the tens and ones place

If Mid(MyNumber, 2, 1) <> "0" Then

Result = Result & GetTens(Mid(MyNumber, 2))

Else

Result = Result & GetDigit(Mid(MyNumber, 3))

End If

GetHundreds = Result

End Function

'***************************************...

' Converts a number from 10 to 99 into text. *

'***************************************...

Function GetTens(TensText)

Dim Result As String

Result = "" 'null out the temporary function value

If Val(Left(TensText, 1)) = 1 Then ' If value between 10-19

Select Case Val(TensText)

Case 10: Result = "Ten"

Case 11: Result = "Eleven"

Case 12: Result = "Twelve"

Case 13: Result = "Thirteen"

Case 14: Result = "Fourteen"

Case 15: Result = "Fifteen"

Case 16: Result = "Sixteen"

Case 17: Result = "Seventeen"

Case 18: Result = "Eighteen"

Case 19: Result = "Nineteen"

Case Else

End Select

Else ' If value between 20-99

Select Case Val(Left(TensText, 1))

Case 2: Result = "Twenty "

Case 3: Result = "Thirty "

Case 4: Result = "Forty "

Case 5: Result = "Fifty "

Case 6: Result = "Sixty "

Case 7: Result = "Seventy "

Case 8: Result = "Eighty "

Case 9: Result = "Ninety "

Case Else

End Select

Result = Result & GetDigit _

(Right(TensText, 1)) 'Retrieve ones place

End If

GetTens = Result

End Function

'***************************************...

' Converts a number from 1 to 9 into text. *

'***************************************...

Function GetDigit(Digit)

Select Case Val(Digit)

Case 1: GetDigit = "One"

Case 2: GetDigit = "Two"

Case 3: GetDigit = "Three"

Case 4: GetDigit = "Four"

Case 5: GetDigit = "Five"

Case 6: GetDigit = "Six"

Case 7: GetDigit = "Seven"

Case 8: GetDigit = "Eight"

Case 9: GetDigit = "Nine"

Case Else: GetDigit = ""

End Select

End Function

save this as as

now, you'll have to activate this AddIns:

in your Excel Worksheet select:

Check the ConvertRs option

now this will be used as User Defined Function.

you can insert it from the Function Options or just enter the following command in the desired cell where you want the result:

Cell Reference means where the number is available, you want to convert.

Try this and then tell me the responce.

Bhasker Kumar

Jul 09, 2009 | Microsoft Computers & Internet

From CASIO FAQ:

**How do change the currency rate?**

When you press the [M/EX] key, it toggles between conversion mode and memory mode. You will see "EXCH" on the display when in conversion mode.

C1, C2, and C3 are three conversion rates. C1 is your home country currency, and so it is always set to 1. C2 and C3 are rates for two other countries, which you can change.

For example, if you want to set a conversion rate of $1 to 0.95 euros, here is what you would do (using C1 for US dollars and C2 for euros):

1. Press [AC]

2. Hold [SET/%] for about two seconds until "SET" appears

3. Press [C2] to select currency 2

4. Input the conversion rate (0.95) and then press [SET/%] to store it in memory

You can check the currently set rate at any time by pressing [AC] and then [C2].

**How do I perform a currency conversion?**

If you want to convert 100 euros to US dollars, you would do the following (assuming you are using C1 for US dollars and C2 for euros):

1. Press [AC]

2. Enter 100 and then press [C2]

3. Press [C1] to convert to dollars

4. To convert back to euros again, press [C2]

You can also perform a currency conversion within a calculation. How much in US dollars would five items selling at 100 euros cost?

1. Press [AC]

2. Enter 5 [×] 100 and then press [C2]

3. Press [C1] [=]

When you press the [M/EX] key, it toggles between conversion mode and memory mode. You will see "EXCH" on the display when in conversion mode.

C1, C2, and C3 are three conversion rates. C1 is your home country currency, and so it is always set to 1. C2 and C3 are rates for two other countries, which you can change.

For example, if you want to set a conversion rate of $1 to 0.95 euros, here is what you would do (using C1 for US dollars and C2 for euros):

1. Press [AC]

2. Hold [SET/%] for about two seconds until "SET" appears

3. Press [C2] to select currency 2

4. Input the conversion rate (0.95) and then press [SET/%] to store it in memory

You can check the currently set rate at any time by pressing [AC] and then [C2].

If you want to convert 100 euros to US dollars, you would do the following (assuming you are using C1 for US dollars and C2 for euros):

1. Press [AC]

2. Enter 100 and then press [C2]

3. Press [C1] to convert to dollars

4. To convert back to euros again, press [C2]

You can also perform a currency conversion within a calculation. How much in US dollars would five items selling at 100 euros cost?

1. Press [AC]

2. Enter 5 [×] 100 and then press [C2]

3. Press [C1] [=]

Jun 22, 2009 | Casio MS-80TE Calculator

You need to make some changes to the VB script.

here are the steps to guide you

Open Excel - press Alt F11, Click on Insert, Select Module - Copy paste the below mentioned script>>>

Function SpellNumber(ByVal MyNumber, Optional incRupees As Boolean = True)

Dim Crores, Lakhs, Rupees, Paise, Temp

Dim DecimalPlace As Long, Count As Long

Dim myLakhs, myCrores

ReDim Place(9) As String

Place(2) = " Thousand ": Place(3) = " Million "

Place(4) = " Billion ": Place(5) = " Trillion "

' String representation of amount.

MyNumber = Trim(Str(MyNumber))

' Position of decimal place 0 if none.

DecimalPlace = InStr(MyNumber, ".")

' Convert Paise and set MyNumber to Rupees amount.

If DecimalPlace > 0 Then

Paise = GetTens(Left(Mid(MyNumber, DecimalPlace + 1) & "00", 2))

MyNumber = Trim(Left(MyNumber, DecimalPlace - 1))

End If

myCrores = MyNumber \ 10000000

myLakhs = (MyNumber - myCrores * 10000000) \ 100000

MyNumber = MyNumber - myCrores * 10000000 - myLakhs * 100000

Count = 1

Do While myCrores <> ""

Temp = GetHundreds(Right(myCrores, 3))

If Temp <> "" Then Crores = Temp & Place(Count) & Crores

If Len(myCrores) > 3 Then

myCrores = Left(myCrores, Len(myCrores) - 3)

Else

myCrores = ""

End If

Count = Count + 1

Loop

Count = 1

Do While myLakhs <> ""

Temp = GetHundreds(Right(myLakhs, 3))

If Temp <> "" Then Lakhs = Temp & Place(Count) & Lakhs

If Len(myLakhs) > 3 Then

myLakhs = Left(myLakhs, Len(myLakhs) - 3)

Else

myLakhs = ""

End If

Count = Count + 1

Loop

Count = 1

Do While MyNumber <> ""

Temp = GetHundreds(Right(MyNumber, 3))

If Temp <> "" Then Rupees = Temp & Place(Count) & Rupees

If Len(MyNumber) > 3 Then

MyNumber = Left(MyNumber, Len(MyNumber) - 3)

Else

MyNumber = ""

End If

Count = Count + 1

Loop

Select Case Crores

Case "": Crores = ""

Case "One": Crores = " One Crore "

Case Else: Crores = Crores & " Crores "

End Select

Select Case Lakhs

Case "": Lakhs = ""

Case "One": Lakhs = " One Lakh "

Case Else: Lakhs = Lakhs & " Lakhs "

End Select

Select Case Rupees

Case "": Rupees = "Zero "

Case "One": Rupees = "One "

Case Else:

Rupees = Rupees

End Select

Select Case Paise

Case "": Paise = " and Paise Zero Only "

Case "One": Paise = " and Paise One Only "

Case Else: Paise = " and Paise " & Paise & " Only "

End Select

SpellNumber = IIf(incRupees, "Rupees", "") & Crores & Lakhs & Rupees & Paise

End Function

' Converts a number from 100-999 into text

Function GetHundreds(ByVal MyNumber)

Dim Result As String

If Val(MyNumber) = 0 Then Exit Function

MyNumber = Right("000" & MyNumber, 3)

' Convert the hundreds place.

If Mid(MyNumber, 1, 1) <> "0" Then

Result = GetDigit(Mid(MyNumber, 1, 1)) & " Hundred "

End If

' Convert the tens and ones place.

If Mid(MyNumber, 2, 1) <> "0" Then

Result = Result & GetTens(Mid(MyNumber, 2))

Else

Result = Result & GetDigit(Mid(MyNumber, 3))

End If

GetHundreds = Result

End Function

' Converts a number from 10 to 99 into text.

Function GetTens(TensText)

Dim Result As String

Result = "" ' Null out the temporary function value.

If Val(Left(TensText, 1)) = 1 Then ' If value between 10-19...

Select Case Val(TensText)

Case 10: Result = "Ten"

Case 11: Result = "Eleven"

Case 12: Result = "Twelve"

Case 13: Result = "Thirteen"

Case 14: Result = "Fourteen"

Case 15: Result = "Fifteen"

Case 16: Result = "Sixteen"

Case 17: Result = "Seventeen"

Case 18: Result = "Eighteen"

Case 19: Result = "Nineteen"

Case Else

End Select

Else ' If value between 20-99...

Select Case Val(Left(TensText, 1))

Case 2: Result = "Twenty "

Case 3: Result = "Thirty "

Case 4: Result = "Forty "

Case 5: Result = "Fifty "

Case 6: Result = "Sixty "

Case 7: Result = "Seventy "

Case 8: Result = "Eighty "

Case 9: Result = "Ninety "

Case Else

End Select

Result = Result & GetDigit _

(Right(TensText, 1)) ' Retrieve ones place.

End If

GetTens = Result

End Function

' Converts a number from 1 to 9 into text.

Function GetDigit(Digit)

Select Case Val(Digit)

Case 1: GetDigit = "One"

Case 2: GetDigit = "Two"

Case 3: GetDigit = "Three"

Case 4: GetDigit = "Four"

Case 5: GetDigit = "Five"

Case 6: GetDigit = "Six"

Case 7: GetDigit = "Seven"

Case 8: GetDigit = "Eight"

Case 9: GetDigit = "Nine"

Case Else: GetDigit = ""

End Select

End Function

>>>Save it as a file on the computer - Select the cell where you want to insert the function - go to Insert - Function - User Defined - Spellnumber - Select the reference value against my number and type true in incrupees.

It would give the value in Word format.

The limiation is it can be only use in teh same workbook.

Next time when you want to use the formula, either you have to redo the process or use this workbook and copy paste data in another one.

Let me know if you face any difficulty.

here are the steps to guide you

Open Excel - press Alt F11, Click on Insert, Select Module - Copy paste the below mentioned script>>>

Function SpellNumber(ByVal MyNumber, Optional incRupees As Boolean = True)

Dim Crores, Lakhs, Rupees, Paise, Temp

Dim DecimalPlace As Long, Count As Long

Dim myLakhs, myCrores

ReDim Place(9) As String

Place(2) = " Thousand ": Place(3) = " Million "

Place(4) = " Billion ": Place(5) = " Trillion "

' String representation of amount.

MyNumber = Trim(Str(MyNumber))

' Position of decimal place 0 if none.

DecimalPlace = InStr(MyNumber, ".")

' Convert Paise and set MyNumber to Rupees amount.

If DecimalPlace > 0 Then

Paise = GetTens(Left(Mid(MyNumber, DecimalPlace + 1) & "00", 2))

MyNumber = Trim(Left(MyNumber, DecimalPlace - 1))

End If

myCrores = MyNumber \ 10000000

myLakhs = (MyNumber - myCrores * 10000000) \ 100000

MyNumber = MyNumber - myCrores * 10000000 - myLakhs * 100000

Count = 1

Do While myCrores <> ""

Temp = GetHundreds(Right(myCrores, 3))

If Temp <> "" Then Crores = Temp & Place(Count) & Crores

If Len(myCrores) > 3 Then

myCrores = Left(myCrores, Len(myCrores) - 3)

Else

myCrores = ""

End If

Count = Count + 1

Loop

Count = 1

Do While myLakhs <> ""

Temp = GetHundreds(Right(myLakhs, 3))

If Temp <> "" Then Lakhs = Temp & Place(Count) & Lakhs

If Len(myLakhs) > 3 Then

myLakhs = Left(myLakhs, Len(myLakhs) - 3)

Else

myLakhs = ""

End If

Count = Count + 1

Loop

Count = 1

Do While MyNumber <> ""

Temp = GetHundreds(Right(MyNumber, 3))

If Temp <> "" Then Rupees = Temp & Place(Count) & Rupees

If Len(MyNumber) > 3 Then

MyNumber = Left(MyNumber, Len(MyNumber) - 3)

Else

MyNumber = ""

End If

Count = Count + 1

Loop

Select Case Crores

Case "": Crores = ""

Case "One": Crores = " One Crore "

Case Else: Crores = Crores & " Crores "

End Select

Select Case Lakhs

Case "": Lakhs = ""

Case "One": Lakhs = " One Lakh "

Case Else: Lakhs = Lakhs & " Lakhs "

End Select

Select Case Rupees

Case "": Rupees = "Zero "

Case "One": Rupees = "One "

Case Else:

Rupees = Rupees

End Select

Select Case Paise

Case "": Paise = " and Paise Zero Only "

Case "One": Paise = " and Paise One Only "

Case Else: Paise = " and Paise " & Paise & " Only "

End Select

SpellNumber = IIf(incRupees, "Rupees", "") & Crores & Lakhs & Rupees & Paise

End Function

' Converts a number from 100-999 into text

Function GetHundreds(ByVal MyNumber)

Dim Result As String

If Val(MyNumber) = 0 Then Exit Function

MyNumber = Right("000" & MyNumber, 3)

' Convert the hundreds place.

If Mid(MyNumber, 1, 1) <> "0" Then

Result = GetDigit(Mid(MyNumber, 1, 1)) & " Hundred "

End If

' Convert the tens and ones place.

If Mid(MyNumber, 2, 1) <> "0" Then

Result = Result & GetTens(Mid(MyNumber, 2))

Else

Result = Result & GetDigit(Mid(MyNumber, 3))

End If

GetHundreds = Result

End Function

' Converts a number from 10 to 99 into text.

Function GetTens(TensText)

Dim Result As String

Result = "" ' Null out the temporary function value.

If Val(Left(TensText, 1)) = 1 Then ' If value between 10-19...

Select Case Val(TensText)

Case 10: Result = "Ten"

Case 11: Result = "Eleven"

Case 12: Result = "Twelve"

Case 13: Result = "Thirteen"

Case 14: Result = "Fourteen"

Case 15: Result = "Fifteen"

Case 16: Result = "Sixteen"

Case 17: Result = "Seventeen"

Case 18: Result = "Eighteen"

Case 19: Result = "Nineteen"

Case Else

End Select

Else ' If value between 20-99...

Select Case Val(Left(TensText, 1))

Case 2: Result = "Twenty "

Case 3: Result = "Thirty "

Case 4: Result = "Forty "

Case 5: Result = "Fifty "

Case 6: Result = "Sixty "

Case 7: Result = "Seventy "

Case 8: Result = "Eighty "

Case 9: Result = "Ninety "

Case Else

End Select

Result = Result & GetDigit _

(Right(TensText, 1)) ' Retrieve ones place.

End If

GetTens = Result

End Function

' Converts a number from 1 to 9 into text.

Function GetDigit(Digit)

Select Case Val(Digit)

Case 1: GetDigit = "One"

Case 2: GetDigit = "Two"

Case 3: GetDigit = "Three"

Case 4: GetDigit = "Four"

Case 5: GetDigit = "Five"

Case 6: GetDigit = "Six"

Case 7: GetDigit = "Seven"

Case 8: GetDigit = "Eight"

Case 9: GetDigit = "Nine"

Case Else: GetDigit = ""

End Select

End Function

>>>Save it as a file on the computer - Select the cell where you want to insert the function - go to Insert - Function - User Defined - Spellnumber - Select the reference value against my number and type true in incrupees.

It would give the value in Word format.

The limiation is it can be only use in teh same workbook.

Next time when you want to use the formula, either you have to redo the process or use this workbook and copy paste data in another one.

Let me know if you face any difficulty.

Feb 13, 2009 | Microsoft Excel for PC

Rupees with Paise

[>9999999]"Rs. "##\,##\,##\,##0.00;[>99999]"Rs. "##\,##\,##0.00;"Rs.

"##,##0.00

Rupees without Paise

[>9999999]"Rs. "##\,##\,##\,##0;[>99999]"Rs."##\,##\,##0;"Rs. "##,##0

Rupees without Rs. notation

[>9999999]##\,##\,##\,##0.00;[>99999]##\,##\,##0.00;##,##0.00

[>9999999]"Rs. "##\,##\,##\,##0.00;[>99999]"Rs. "##\,##\,##0.00;"Rs.

"##,##0.00

Rupees without Paise

[>9999999]"Rs. "##\,##\,##\,##0;[>99999]"Rs."##\,##\,##0;"Rs. "##,##0

Rupees without Rs. notation

[>9999999]##\,##\,##\,##0.00;[>99999]##\,##\,##0.00;##,##0.00

Sep 14, 2008 | Microsoft Excel for PC

359 people viewed this question

Usually answered in minutes!

×