Question about Garmin StreetPilot c550 GPS Receiver

1 Answer

Volume dial- not controling properly

When using for the first time I entered an address and hit go! I could hear a faint voice ( a lady's voice) I pulled over to try to turn up the volume and the wheel just kept turning and there was no change, then there was no voice!
So I read the manual for troubleshooting and there wasn't anything on this.
So what do you think??

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 504 Answers

I think you should return the unit as defective. The volume knob should only turn to a point, then stop. Turning it upwards raises the volume and turning it downward lowers it. You should also see yellow bars on the right side of the unit indicating the volume level while you are doing this. If not, the unit may be damaged and should be replaced.

Posted on Aug 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My NAD C350 plays very faintly. when I turn the volume dial to the max position, I can bearly hear the music. I can hear properly from earphones output. Thanks


Take care. First put the volume down complete. Then unplug the head phone and than try to raise the volume. Could be the headphone connector does not switch through correct. Could be the connections between the pre and power amp are not in place or not proper pushed in?
Always take care when working with amplifiers. When switching them on with volume to max, you easy can kill your speakers. Also when disconnecting the headphones on full power kan damage the loudspeakers.

Aug 29, 2013 | NAD Audio Players & Recorders

1 Answer

I can hear callers but they cannot hear me. Mute is not engaged,


Please see the link below for the User's Guide.

• Headset is muted. Long press (3 sec.) the volume down button on headset to unmute the microphone. See page 16.
• Improper positioning of voice tube. Try various other positions.
• Voice tube may be clogged. Remove voice tube and test to see if callers can hear you without it. If they can, then replace the clogged voice tube. See page 18.
• Speaking volume is too low. Increase the speaking volume by
adjusting the speaking volume minor adjust buttons on the base unit as described on page 16. If the volume is still too low, select another speaking volume major adjust setting as described on page 16.
• Incorrect configuration dial setting for your phone. Try other
phone configuration dial settings on the base unit. Ensure the
selected number is in line with the position indicator. See page 14.

Plantronics CS70 User's Guide

Good luck from Headsets Direct!

Jul 18, 2011 | Plantronics CS70 Wireless Headset

2 Answers

How in the world do you set up voice mail on the e71


Hello Debb,

Please visit the link provide below :

http://www.gen-i.co.nz/Solutions/Mobility/Device_Documents/Nokia%20E71/Setting%20up%20Voicemail%20on%20the%20Nokia%20E71.pdf

Apr 15, 2011 | Nokia E71 Smartphone

2 Answers

LOOKING FOR A MANUAL FOR lucent 9510 WIRLESS TELPHONE


Hi, Click this link for more data : http://www.vineland.org/tech/phones.pdf Regards, vote please, Jay
Attachment:
Lucent Telephone User's Guide (All Models) For corrections to this document, contact Steve Dantinne at sdantinne@vineland.org or 856.794.6700 x 2350 VoiceMail Welcome to Audix! The first time you use Audix you must record your name and create a password! To Log In: 1. ON Premise Dial 2099 OFF Premise Dial 856-794-6700 extension 2099 You may also dial the main school number to access the voice mail system 1. The system will ask for your extension number followed by the # sign. Note: Teachers will use their voicemail number followed by the # sign It is not the classroom extension number. 2. Enter First Time Password # sign. Record Name As you use Audix, your name will be heard by you and other Audix users. Press 1 Speak your name Press 1 when finished Press # to approve Create Password You will be required to enter a new password with a minimum of 5 digits followed by the # sign. The maximum length of a password is 15 digits. Reenter your password for confirmation followed by the # sign. To Create a Personal Greeting This is what callers will hear when they reach your mailbox. Press 3 anytime you wish to do anything concerning your greeting Press 1 to create your greeting Press 1 to indicate the greeting number you are going to record then speak your greeting Press 2 then 3 to replay the greeting Press # to approve Press 1 to activate for all calls **X or **9 to hang up. To Get Messages 1. ON Premise Dial 2099 OFF Premise Dial 856-794-6700 extension 2099 You may also dial the main school number to access the voice mail system 2. Enter your extension or voicemail number then press #. Note: Teachers will use their voicemail number followed by the # sign It is not the classroom extension number. 3. Enter your Password then press # You are now Logged in. Press 2 (You will hear the day, date and time the message was left and the length of the message. If the message is from another extension you will also hear the person's name and extension number) This is the header To play the message press 0 To listen to header again Press 2 then Press 3 To listen to message again Press 2 then Press 0 To Delete message Press *D To skip to next message Press # To forward Press 1 then Press 2 (record your comment) Press # when done recording. Enter the extension numbers you are forwarding to followed by #. Press # when done addressing. Press # to send. Call Handling Features Volume Control The volume control button will adjust three items. 1. If you are not using the telephone, it will adjust how loud or how softly the telephone rings. Press the up arrow to make the telephone ring louder. Press the down arrow to make the telephone ring softer. 2. If you are using the handset or receiver, it will adjust the sound of the incoming voice. The up arrow will make the voice louder. The down arrow will soften the voice. 3. If you are using your speakerphone, the volume control will adjust the sound on the speakerphone. The up arrow will make the sound louder. The down arrow will make the sound softer. Each item is independent of the other, depending on the device being used. That it what the volume bar will adjust. Hold The hold feature puts a call on hold until you can return to it. To keep a call on hold while you answer another call or perform another task. Press HOLD. The green light next to held call will blink. To return to the held call Press the call appearance button of the held call. Redial The Redial (or last number dialed), feature automatically redials the last extension or outside number dialed. To redial the last number that you dialed. 1. Press REDIAL. The last number you dialed is automatically redialed. Note: The redialed number can be an outside number, an extension, or a trunk or feature access code. Transfer The Transfer feature allows you to transfer a call from your telephone to another extension or outside number, if allowed. To send the present call to another extension or outside number 1. While on a call, press TRNSFR. (Dial Tone). Present call is put on hold, and the green light next to the held call blinks. You are given a new call appearance. 2. Dial the number to which the call is to be transferred. 3. Remain on the line and announce the call; if the line is busy or if there is no answer, return to the held call by pressing it's call appearance button. 4. Press TRNSFR again. Call is sent to the dialed number. 5. Hang up. ...............

Jan 21, 2011 | Cell Phones

1 Answer

How do i increase the volume ob the receiver,not the ringer volume ,voice while speaking as i cant hear the other party loud enough


When you are talking on the phone (or listening to a dial tone), the volume control works to control the volume of the receiver. When the phone is not being used, the volume control is used to control the volume of the ringer.

Feb 24, 2010 | Uniden Cordless Phone

1 Answer

We can hear the customers but they can not hear us! Help


Here's the troubleshooting from the manual:
  • Make sure voice tube positioned properly
  • Voice tube is not clogged (remove tube and see if works)
  • Verify transmit volume control of amplifier is set properly
Couple other suggestions to try:
  • Reseat all connections to make sure firm connection
  • Look for any other volume controls

Link to manual for headset:
http://www.plantronics.com/media/media_resources/literature/user_guides/supraplus_ug_en_fr.pdf

Apr 06, 2009 | Plantronics H251 SUPRAPLUS MONO HEADSET -...

1 Answer

Can't Hear anyone and they can't hear me


Be sure you have not muted the players. Also be sure that your system isn't set on mute.

To check, hit the middle xbox button on the controller. Go to settings, preferences, click VOICE. Be sure the mute box is not checked. Also be sure the volume is all the way up (max is 10), and the voice output is what you feel suits you.

Also, most headsets have a volume control on them (most of the time they are attached to the cord) and be sure that this is not all the way on low.

Hope this helps!

Apr 06, 2009 | Video Game Consoles & Games

1 Answer

LG flare voice dialing


It is confusing and took me a while to find the answer.
On the left side of the phone there are three buttons. The two near the top control the volume. The third one is used to activate Voice Dialing. Press it and you should hear: "Please say the name".

Mar 29, 2009 | Cell Phones

1 Answer

VOICE DIALING


You need to Add Voice to Contact first

for that find out the key which is works for Voice Commands.

By default if you hold Volume Up key or 1 or * keys any of these keys may work for Voice Commands.

Sort out then you will get an option enter voice command ..

let me know the result..

Regards,
Suraj.

Feb 19, 2009 | Motorola Mobility RAZR V3

Not finding what you are looking for?
Garmin StreetPilot c550 GPS Receiver Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garmin GPS Experts

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2124 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

TO Lady

Level 3 Expert

638 Answers

Are you a Garmin GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...