Question about Avery DesignPro Deluxe CD-ROM Label-Printing Software (50072782052398)

1 Answer

Paxar 636 diagnostic test 2 error

When my its turn on its shown this message. what can i do please help me

Posted by on

  • azmsrt Apr 19, 2009

    mine shows most of the time "1 error and 3 error"

    I do not know what it is so I just ignore it but it will trouble me through out the day

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Paxar 636 diagnostic test 2. i've encounter this problem last 2004. the diagnostic test stops at diagnostic 2. what we did is that we've checked the mother board and the printhead board. basically those boards are the main problem when you encounter that error (diagnostic test 2 error ). what we did is that we changed the mother board as well as the printhead board.

Posted on Dec 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error #756


I haven't worked on Paxar products, but the manual directions seem reasonably complete, with drawings. (PDF pages 17-22 provide the basic directions; the following pages give directions for special media types and options.)


Error #756 = "Load Supplies"

I deduce from this that somehow you missed the paper detector when you loaded the supply strip. This is probably the "die cut sensor" referenced on page 2.3 (PDF page 19, shown in drawing on the next page). Make sure the strip feeds through the detector slot.

Nov 28, 2011 | Paxar Monarch 9825 Thermal Label Printer

2 Answers

The printer is showing a message catridge error - Refer to device documentation to troubleshoot.


This is an internal electrical malfunction within the cartridge - I suggest you run the following two service tests:
1) You can 'temporarily' bypass an 'Incompatible Cartridge' error (or any other cartridge electrical malfunction error for that matter) by accessing the OJ's service menu...see the Inkjet411.com support youtube video found here:

HP Officejet J4500 J4600 4500 Cartridge Error Bypass -- HP 901 Cartridge Errors: http://www.youtube.com/watch?v=I4-m_RLdRE4


2) You can also run the 'tap 41' diagnostics check on the HP 901 cartridge(s) electrical health, via the access code/procedure shown in the following video:

HP Officejet J4500 J4600 4500 Printers Tap 41 Diagnostics -HP 901 Incompatible Print Cartridges: http://www.youtube.com/watch?v=S6uATgXxQlE

Jan 17, 2011 | HP Officejet 4355 All-In-One InkJet...

1 Answer

Sudden Blue screen display on my Dell Inspiron 1545 with MS XP OS-Then I ran diagnostics and got this result- "DST short Test-Failed-Error code-2000-0151 Error message: Hard Drive 1-incorrect staus...


screen display on my
Dell Inspiron 1545 with MS XP OS-
Then I ran diagnostics and got this
result- "DST short Test-Failed-Error
code-2000-0151 Error message:
Hard Drive 1-incorrect staus 3E. Please help fix this problem. Thanks

Nov 03, 2010 | Computers & Internet

2 Answers

Get error oxc 18a0001, when I turn on Hp Photosmat c5180 all in o


THAT 0X ERROR IS AN INK SYTEM FAILURE IT MAY HAVE BEEN CAUSED FROM THE REFURBED CARTRIDGES... THE HP WILL WORK WITH THE REFURBS FOR A FEW TIMES BEFORE REJECTING THE CARTRIDGE OR CAUSING AN 0x ERROR. THE UNIT NEEDS TO GO THRU AN ELABORATE INK SYSTEM RESET. OR HAVE THE PRINTER REPLACED

Mar 29, 2010 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

80 maintenance infoprint 1125


You need to replace your Maintenance kit and reset the fuser count.

This counter is reset by the servicer after a “80 Scheduled
Maintenance” message displays (300K copies) and a maintenance
kit is installed.
To view the Maintenance Page Count:
1. Select Maintenance Count Value from the Diagnostic menu.
2. Press Return to go to the previous menu.
To reset the Maintenance Page Count to zero:
Select Reset Maintenance Count. Pressing Select resets the
maintenance page counter to zero. Reset Maintenance Count
Saved displays momentarily. When the reset operation is complete,
the menu returns to the Printer Setup Reset Maintenance Count
screen.

To enter the Diagnostic Mode:
1. Turn the printer off.
2. Press and hold the Go and Return buttons.
3. Turn the printer on.
4. Release the buttons when "Performing Self Test" displays on
the operator panel.
The tests display on the operator panel in the order shown:
• Print Registration
• Print Tests
• Hardware Tests
• Duplex Tests (If installed)
• Input Tray Tests
• Output Bin Tests
• Base Sensor Test
• Printer Setup
• Error Log
• EP Factory Defaults

Sorry English only.... hope you can read English or google translate it...

Feb 24, 2010 | IBM Infoprint 1125 Laser Printer

2 Answers

Have a message on GE Profile Harmony washer that say " a problem has been detected with the unit" help?


Washers - Harmony Washer Error Message or Code
The Harmony washer electronics can automatically determine if problems exist with the machine. Sometimes an error code can also be present because of things the machine cannot control: like changes in house voltage, water pressure, or temperature.

"A problem has been detected with this unit" will be displayed on the screen.

The most common solution for this message is to turn the machine OFF and then ON. However, this message will sometimes cause the control to stop the machine from working. With this type of error, the control panel will need to be reset. The following steps will allow you to reset your control.

Solution:

1. Clear the ERROR from the screen: Press and hold the MY CYCLES and BACK buttons simultaneously for 3 seconds. The control will display any recorded errors. Please write down what error codes are shown on your screen in case service is needed. If a MORE icon is displayed on the screen, press MORE to list additional errors. When the EXIT button appears, press EXIT.
2. Remove Power: Follow the onscreen instructions to remove power (unplug unit) and then immediately plug unit back in.
3. Clear Setup Mode: After power is restored, a setup screen that begins with "Congratulations..." will be shown. DO NOT PRESS the OK button shown at the bottom of the screen. Press the START/STOP and POWER buttons simultaneously until the Home Screen is displayed. Your unit is ready to function normally.

Jan 15, 2010 | GE WPGT9360E Profile Harmony 4.0 cu. ft....

2 Answers

How dod you check the configuration and firmware version on the Paxar Monarch 9855?


Perform an internal diagnostics test print. I believe you can press both of the arrow buttons at the same time, and it should print out what's in the printer and how its configured. There you should find the firmware version.

Oct 20, 2009 | Paxar Monarch 9855 Thermal Printer

1 Answer

A4 Tech Webcam is looking for 64 bit Driver. It does not work with the 32 bit driver that goes with it .


http://www.mediafire.com/file/5nofmnmcjiw/camera-a4tech pk 636 ma -driver.zip
try this one ...do not worry cause it says 636 ..I also have the driver on 64 for 635 and its exactly the same ...if its doesnt work tell me and I will send it on mail or yahoo messenger

May 19, 2009 | A4tech PK-635 Webcam

1 Answer

Disk read error


try to run diagnostics,restart your computer, press f12, choose utility partition,choose test system, then run express test..that will tell you if hdd is bad, it will give you an error message/ number

Oct 15, 2008 | Dell Dimension™ B110 PC Desktop

1 Answer

Invalid Command


Your 287 error has to do with an incorrect setting for printhead width, and in the control language that your software is sending to the printer, they either have something other than 0, or there is an invalid character like a carriage return or line feed being sent to the printer.

This is a difficult one to trace since the software sends the code and you cannot necessarily change what is being sent.

Please note that the software that you really should be using is PC Mate Plus, as this is a specialized printer for Paxar supplies called Care Labels. You may be able to cheat if your software allows you to select 300DPI print heads. If not, you'll need the software I suggest.

If you do not have this software, please contact Paxar (now Avery Dennison) at 1-800-543-6650 and ask to be connected to someone in technical support or if the customer service rep can offer you a link to a website for software download, or purchase.

Ohiotech

Nov 19, 2007 | Monarch 9855 Thermal Printer

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

393 people viewed this question

Ask a Question

Usually answered in minutes!

Top Avery Computers & Internet Experts

Donna Sander

Level 2 Expert

193 Answers

NIK
NIK

Level 2 Expert

206 Answers

yadayada
yadayada

Level 3 Expert

68032 Answers

Are you an Avery Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...