Question about Intel 865G Motherboard

1 Answer

Intel d865gsa m/b having no display , gives ram missing bip sound, post card gives c7 code/

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Intel Master
  • 27,725 Answers

The beeps are post during post the very first work is done by the ram,all the memory in the ram is first transferred to the hard disk,and remains active untill turned off.
make sure that your RAM is securely seated
test or replace all the leads that attach to your hard drive make sure the connections are secure including electrical extensions + IDE,SATA the ones that attach from your
((motherboard to hard drive))
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty or just replace them they are probably old and faulty ?
hope this helps

Posted on Mar 17, 2011

  • SAMDADA Jun 09, 2013

    Hellow.. To get VIDEO OUT i dont need to connect anything. just CPU and RAM install on motherboard.. then i got C7 POSTcode and no display. so any SOlution? When i remove RAM then i get Beep code of RAM doenst Install, means BIOS is ok ?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No display problem for intel D865GSA board


What are you formatting ? Have you changed the RAM. Does tour system work in its original configuration ? You do not say what the pattern of the beeps is. Before the display disappears, is there a message sent to the screen ?
From the manual
http://download.intel.com/support/motherboards/desktop/d865gsa/sb/d5600601us.pdf

Whenever a recoverable error occurs during POST, the BIOS displays an error message

describing the problem (see Table 53). The BIOS also issues a beep code (one long

tone followed by two short tones) during POST if the video configuration fails (a faulty

video card or no card installed) or if an external ROM module does not properly

checksum to zero.

An external ROM module (for example, a video BIOS) can also issue audible errors,

usually consisting of one long tone followed by a series of short tones. For more

information on the beep codes issued, check the documentation for that external

device.

There are several POST routines that issue a POST terminal error and shut down the

system if they fail. Before shutting down the system, the terminal-error handler issues

a beep code signifying the test point error, writes the error to I/O port 80h, attempts

to initialize the video and writes the error in the upper left corner of the screen (using

both monochrome and color adapters).

If POST completes normally, the BIOS issues one short beep before passing control to
the operating system.
18.April.2014

18.April.2014

Apr 18, 2014 | Intel 865G Motherboard

1 Answer

Will not power on


if all fan are spin up.
see your RAM, maybe its broken.
a computer need a routine checking all RAM, if its not good, your computer will freeze.
try pull out and put it again. if its doesn't work. replace it.
PS. when you pull out your computer with all RAM pulled out and doesn't heard any BIP BIP BIP (BIOS POST CODE) noise. I can Assume your Mainbpard or ypur processor is broken. maybe its sound scary but its not. see for computer service center to help, they can give you good advice.

May 09, 2012 | HP KT334AA Pavilion Media Center M8530F...

1 Answer

I haveIntel D865GSA Motherboard. woth p4 2.4 processor. suddenly it cannot display. moniter gives orange light. HDD & SMPS is ok.i check it on other pc.


It may be caused by your RAM memory. Try cleaning it or try another one or change slot. If this don't work, unplug HDD/floppy/dvd drives/usb/audio from Motherboard & try.
If the above don't work, then it's probably the motherboard.. Hope u get the cheapest solution

Feb 10, 2010 | Intel D865GSA (BOXD865GSAL) Motherboard

2 Answers

D865GSA intel mother board supports DDR1 or DDR2 ram


Straight from intels web site...
Two 184-pin DDR SDRAM Dual Inline Memory Module (DIMM) sockets Support for DDR 400, DDR 333, and DDR 266 Support for up to 2GB of system memory

Mar 09, 2009 | Intel D865GSA (BOXD865GSAL) Motherboard

2 Answers

RAM Problem


either the ram is faulty or not compatible try using in a different board
the motherboard will beep with no memory in

Jan 17, 2009 | Intel Motherboard

2 Answers

No display


it may be the problem of your monitor.check it

Jan 11, 2009 | Intel Motherboard

4 Answers

Intel 845 chipset MB of Kobian make


try ramsticks individually (one at a time) in each of the memory banks until you get a post on the screen. if you don't get a post, then the memory might be parity and the board needs non-parity ***or vice versa***. Also, find the jumper on the motherboard for a bios reset, and reset the bios, then perform the previously stated memory tests.

Sep 26, 2008 | Intel D845GLLY Motherboard

Not finding what you are looking for?
Intel 865G Motherboard Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Tony

Level 3 Expert

2600 Answers

David
David

Level 3 Expert

778 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...