Question about HP Printers & Copiers

1 Answer

How to insert ink - HP Printers & Copiers

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

You mean ink cartridges?
Remove the tape from cartridge.
Caution: Do not touch the copper-colored contacts of the cartridges. then hold on the top HP logo. Insert it (tri-color cartridge- left slot)-(Black cartridge- right slot) make sure you push the cartridges firmly until they snap into place.

see your manuals dear, you have it with your printer u bought.

Posted on Aug 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp B110a this printer showed an error ink system Failure 0xc19a0023. How do i fix it tel me please please. ????


Try to re insert your ink cartridge ,set the printer into ink replacement mode ,then remove cartridge then re insert it back ,maybe it can help(be sure your ink are not empty )

Aug 02, 2014 | Printers & Copiers

Tip

Duplicate Cartridge Error - Which one is causing it


The purpose of this exercise is to rule out ink tanks that are behaving and isolate the one(s) responsible for the duplicate. Please perform the following:

1. Open the printer and remove all ink tanks.

2. Insert a single ink tank in the printer then close the cover.

3. Confirm whether the printer recognizes the installed tank properly. If it does, it will indicate it does not detect the other ink tanks, as they are not currently installed in the printer.

4. Repeat steps 1-3 with another ink tank.

5. If the printer at any time indicates two of the same ink tanks are installed, the cause will be the last tank installed. For example, if you inserted an ink tank earlier, and you later inserted another ink tank, and it said two of the same inks were installed, the cause of the issue is the last ink tank.

Hope this helps
Mike

on Aug 04, 2008 | Canon PIXMA iP4200 InkJet Photo Printer

2 Answers

Need to replace ink cartridge and I forget how to replace ink cartridge


1. Remove the black ink cartridge from its bag.
2. Carefully remove and discard the orange cap.
Handle ink cartridges carefully to avoid ink transfer.
3. Insert the black ink cartridge into the printhead.
4. Press down on the ink cartridge until you hear it click
into position.
5. Open and uncap the color ink cartridge. Insert it into
the printhead.
6. Press down firmly on the ink cartridge until you hear it
click into position.
7. Close the printer access door.

Here's the link if you want some illustrations. Link
Chapter 3, Page 5

Thank you for posting..

Jun 30, 2011 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

I am having problem on how to change the ink cartrdges. I can't get it to go to the center to be able to change the ink. Pls. help


hi,
following images and steps may guide you.


first know the parts.

..cseian_4.jpg

Tear open the black ink cartridge bag at the notch and remove the ink cartridge.
IMPORTANT: Insert the ink cartridge immediately to prevent any drying of the ink.

cseian_5.jpg



Remove and discard the orange cap.
IMPORTANT: Handle ink cartridge carefully to avoid ink transfer.

cseian_6.jpg


Insert the black ink cartridge into the printhead. User's

cseian_7.jpg


Press down on the ink cartridge until you hear it snap into position

Tear open the color ink cartridge bag at the notch and remove the ink cartridge.

Remove and discard the orange cap.

Insert the color ink cartridge into the printhead

Press down firmly on the cartridge until you hear it snap into position
Close the printer access door.

cseian_8.jpg


regards,
cseian

Feb 16, 2011 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

How do I insert my ink cartridge into my Canon MP240


1st you must switch on the power. the lift up the scanner unit. The you will see the cartridge holder moving to the left hand side. And then you may insert the ink cartridges.

May 21, 2010 | Canon PIXMA MP240 All-In-One InkJet...

1 Answer

Canon mp830 service error 5c310 alarm light keeps


http://damnprinter.com/226/canon-service-call-errors.html
http://www.fixyourownprinter.com/forums/inkjet/26091
You need to clean your waste ink i think. For troubleshooting purposes, please perform the following:
1. Open the printer and remove all ink tanks.
2. Insert a single ink tank in the printer then close the cover.
3. Confirm whether the printer recognizes the installed tank
properly. If it does, it will indicate it does not detect the other ink tanks, as
they are not currently installed in the printer.
4. Repeat steps 1-3 with another ink tank.
5. If the printer at any time indicates two of the same ink tanks are
installed, the cause will be the last tank installed. For example, if
you inserted an ink tank earlier, and you later inserted another ink
tank, and it said two of the same inks were installed, the cause of
the issue is the last ink tank.

May 17, 2010 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

I have inserted solid ink cartridges where the


check your user manual about the steps you must do it after insert the solid ink

Apr 07, 2010 | Printers & Copiers

1 Answer

UO43 error there is no ink cartridge there, but when there is an ink catridge UO71 it says more than one ink cartridge


Hi there

For troubleshooting purposes,
Perform the following:

1. Open the printer and remove all ink tanks.

2. Insert a single ink tank in the printer then close the cover.

3. Confirm whether the printer recognizes the installed tank
properly. If it does, it will indicate it does not detect the other ink tanks, as
they are not currently installed in the printer.

4. Repeat steps 1-3 with another ink tank.

5. If the printer at any time indicates two of the same ink tanks are
installed, the cause will be the last tank installed. For example, if
you inserted an ink tank earlier, and you later inserted another ink
tank, and it said two of the same inks were installed, the cause of
the issue is the last ink tank.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Mar 08, 2010 | Canon Pixma MP500 All-In-One InkJet...

2 Answers

Inserting the ink cartridges!


I read one of the earlier posts which helped; the problem was that there is a dock built in to the left, but that is NOT where the ink goes! The real place hides to the right and only slides over when the printer is turned on. I had to almost force it to get it to stay to the left over the dock so I could actually insert the ink cartridge. The previous posters' soluntion, turning the printer on so the cartridge dock moves into view, is the only thing that worked for me.

Feb 25, 2008 | Canon PIXMA MP210 Photo All-In-One Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...