Question about Office Equipment & Supplies

1 Answer

We have a Konica Minolta Bizhub 600, now rebranded as an Oce IM 6020. I purchased a used hard drive kit from a working copier and have installed it and formatted it with success in the control panel. My question is about the FAN that sits on top of the HDD. The cable from the fan is only about 6 inches long and doesn't reach the logic board. Also, there doesn't seem to be any available power ports on the logicboard for this fan anyway. It's the standard 4-pin, small white plastic connector. Is there supposed to be an extension off of the HDD power cable or elsewhere I'm missing? Here's a quick snapshot from my iPhone. There is a white port near bottom right of RAM slots, but it only has 3 pins, so won't fit. http://dl.dropbox.com/u/332724/bizhub600-hddfan.jpg Thanks for the help. Brian

Posted by Anonymous on

  • Anonymous Apr 22, 2011

    Thanks gmeier, good tip. I was actually lucky enough to have a 2nd hard drive kit from the same eBay auction, which had a longer power cable on the fan that reached the logic board. All is working fine now! :)

  • Anonymous Apr 22, 2011

    Thanks gmeier, good tip. I was actually lucky enough to have a 2nd hard drive kit from the same eBay auction, which had a longer power cable on the fan that reached the logic board. All is working fine now! :)

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 352 Answers

By the look of it this fan is supposed to go into the logic board, the black is earth, the red is +12v and the other are used for speed and/or temp readings. If the bizhub still works correctly without recieving these readings then you can simply connect the black wire from the fan to the black power connector for the HDD, and the red wire from the fan to the Yellow wire for the HDD. dont worry about connecting the middle two to anything. This will get the fan spinning. I hope this helps Regards GM

Posted on Apr 12, 2011

  • Grant Meier Apr 22, 2011

    Excellent. Good news!



    Regards
    GM

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a technician in metro atlanta who has expierence with konica minolta c500 or 8050


contact the manufacturer we have no idea who does that service for them anywhere

Nov 17, 2015 | Konica Minolta Bizhub Pro C500

1 Answer

Bizhub c253


will require install kit do you have that and the hard drive kit to seperate kits

Feb 12, 2014 | Konica Minolta bizhub C351 All-In-One...

1 Answer

How do i install a fax card in the bizhub b250


do you fave both the mount kit and the fax kit???????????????? recommend a tech as certain things need to be done in order

Feb 04, 2014 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Error code c6708


Please send me konica minolta bizhub 600 full service manual and help us this code c6708 still and my next machine bizhub 750 still warming up why problem this machine please help and send me your email address.
i want to talk to you continuous

May 18, 2013 | Konica Minolta Developer 02xk Dv710 for...

1 Answer

Konica minolta c350 error code c-0096


If your copier models is Konica minolta Bizhub C350 reset the error code:
Turn OFF the copier.
Press and keep pressed the Utility key and turn ON.
Keep pressed the Utility key and wait will Trouble reset message displayed.
Release the Utility key and touch the message.
Turn OFF the copier,wait 1 minutes and turn ON.
If the code persist enter in the service mode,select counter,select service call condition and read the trouble code description to lacalizate the truble.
If your copier model is KonicaMinolta Dialta CF3102 or OCE CS 220 the code C0096 refer to Transfer belt separation.

Apr 09, 2013 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Minolta bizhub 421


Kindly tell me what is the problem you are facing in Konica Minolta bizhub 421 MFP?

May 30, 2012 | Konica Minolta Bizhub 421 Mfp...

1 Answer

Installing a hard drive for Bizhub C350


IF YOU CAN GET HARD DISK FROM ANY WHERE THEN CLONE IT IT WORKS

Feb 10, 2009 | Konica Minolta bizhub C250 All-In-One...

2 Answers

Question about Konica Minolta Bizhub 350


click here for the steps on how to configure the bizhub 350 and here for the vista driver that you need to use if you're going to install it in a vista computer

hope this'll help you

ciao

Aug 26, 2008 | Konica Minolta bizhub 350 All-In-One Laser...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

691 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...