Question about Powerware 3105 500i (0790341043681) UPS System

1 Answer

Good afternoon The system has a red light flashing constantly and is emitting 3 beeps every thirty seconds. Thanks for your help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

The battery in your UPS needs to be replaced. You can contact the manufacturer for a replacement battery -- depending on your warranty, they may replace it for free.
http://powerware.eaton.com/Products-services/Backup-Power-UPS/3105.aspx?cx=3

Posted on Mar 17, 2011

Testimonial: "Thank you very much - I suspected as much but found the troubleshooting area of the manual a little difficult to decipher !"

  • saraemoore Mar 17, 2011

    No problem -- glad to help!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire electric dryer (FEQ1442CES) keep flashing and beeping even after cleaning lint filter.


Good Afternoon Friend,

I understand that your Frigidaire dryer, model# FEQ1442ES, keeps beeping and flashing lights. I also see that you have cleaned all the lint out and your appliance will not run more than about 10 seconds. I suggest contacting your local authorized technician for further assistance. They will be able to diagnose your appliance, determine what is causing the lights to flash and the beeping, and repair your dryer. Hope this is helpful.

-Best Regards-
WP

Jul 04, 2014 | Frigidaire FEQ1442ES Electric Dryer

1 Answer

My ps seems to have crashed!! it will only turn on momentarily,the light goes blue for a second, flashes orange?? then turns off!! the red light flashes till i touch the power on sensor,beeps then goes...


Hi tomtoremar,

Are you seeing any flashing red/yellow lights?

If so this is the red light error and you will find that is why the system will not turn on.

Why Does It Happen?

The GPU and the CPU are the 2 main chips in the system and they deal with all of the number crunching however they can get very hot and if they lose connection the system will either freeze up or turn off and give you the red flashing light.

How To Fix?

The key is stopping the heat build up and you can either send it in and they will fix it for you.

Bear in mind that for the PS3 red flashing light error you will be waiting for about 4 weeks and it will also cost you $150 for the repair bill!

Other Ways To Fix?

You can also use a good PS3 Repair Guide to fix it and this will show you how to stop the heat build up with a few household items.

Just make sure that you get a good guide there are some good ones out there!

Click Here For A Complete Review Of All Available PS3 Repair Guides.

Hope this helps and any questions let me know?

Mar 27, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

When i turn on my ps3 to choose a user it doesnt show any of the users i have, so obvioulsy i cant do anything on my ps3. All it shows is the wavy background, Help me pleaseeee!


Try doing a master reset of your system.
1.) Turn off the hard switch on the back of your system and wait 30 seconds.
2.) Turn the hard switch back on so that the PS3 displays the red "stand by" light on the front LED.
3.) Hold your finger on the soft "on switch" (above the red LED) for about 10 seconds until the PS3 emits a beep.
Good Luck!
-Tom

Sep 28, 2009 | Sony Playstation 3 (PS3) Console

5 Answers

It doesn't start up, only beeps and red light flashes


pls try to use another compatible memory stick.

then confirm the status of your micro processor

Apr 21, 2008 | HP Compaq dc7100 Ultra-slim PC Desktop

4 Answers

HP Compaq d530


it all depends on the number of flashes , pause, repeat.
Since the problem did not indicate any beeps her is the following info


Power LED blinks RED 2 times, one every second, followed by a
2-second pause. = Processor Thermal Protection Activated


3 blinks 1 second apart = Processor not installed (not an indicator for a bad processor).

4 blinks 1 second apart .= Power Failure (power supply is overloaded)

Other possibilities are:
5 blinks 1 second apart No memory
6 blinks 1 second apart No graphics
7 blinks 1 second apart System board failure (detected prior to video)
8 blinks 1 second apart Invalid ROM

Nov 07, 2007 | HP Compaq Business d530 Ultra-Slim PC...

2 Answers

Display doesn't turn on, emits short beeps and blinks lights


Sounds like a low power problem, Check the power supply with a good ohm meter set to DC voltage if voltage is less than 14 v. Replace the supply. DWW

Sep 20, 2007 | Samsung SyncMaster 240 T (Silver) 24" LCD...

Not finding what you are looking for?
Powerware 3105 500i (0790341043681) UPS System Logo

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Powerware Computers & Internet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Joe Lamb
Joe Lamb

Level 3 Expert

460 Answers

Are you a Powerware Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...