Question about Televison & Video

1 Answer

When turned on nothing happens. Activation light turns blue; the machine makes a series of 'beeps" and then nothing

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,654 Answers

You have a bad board in the set, usually the power supply board. Millions of people have the sme issues, there are a lot of bad capacitors sold in the last few years and now they are starting to fail. Check the boards for any warped, burnt, split or mushroomed capacitors and you will probably find your problem. If your not handy enough to do this please call a service tech for help.

Posted on Mar 17, 2011

  • joseph r y couturier Mar 17, 2011

    How do I take the board out to check it.

  • Dcramer531
    Dcramer531 Mar 17, 2011

    Most boards simply plug in a socket, there may be a few screw involved ,but usually they are either in a socket or conncted to a ribbon wire depending on the board and the make an model of your set. They just unplug and new one plug in. Make sure the set has been unplugged for at least an hour and then take a scre driver and cross the prongs on your plug just to make sure all the stored electricty has been dispersed.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Machine turns on and just beeps

Replace the bad thermistor. Costs about $6. Not that hard to do. Check out repair videos at Or

Oct 08, 2017 | LG WM-2277HW Front Load Washer

1 Answer

I am getting an error it is as follows: finished, spin, and wash lights blinking plus 3 beeps. What does this mean?

Try restarting it, make sure the load isnt to heavy, if that does not help, call a local repair man.

Nov 06, 2013 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

Hi, I have a delonghi 3400 espresso machine. When I turn it on, it says "turn the steam knob". I turned the steam knob to "on" and nothing happens. I pushed all the buttons and...

you must purge the machine first, by waiting till the light turns on then slowly turn steam knob until a steady stream of water appears.Make sure unit is full of water.

Feb 17, 2011 | DeLonghi EAM3400 Espresso Machine

1 Answer

My ASPIRE M5641 desktop cannot start, it only displays a blank screen there is not even a beeping sound when I turn it on, is it damaged or something? before it turns like this I've read in the screen in...

check on your RAM memory whether is loose or not, try to remove the RAM memory and insert it back again. After this is done,t he beeping sound will gone and yr desktop may start.

Nov 18, 2010 | Acer Aspire M5641 PC Desktop

1 Answer

I request information about angel care AC401 We have build this product but we are not able to work it. When we turn on the unit parent the digital screen shown "--" and the nursery unit icon...

turn both the nursery and parent units off.

turn on the parent unit.

hold menu for 5 secs until it beeps.

turn on the nursery unit.

press and hold the little round blue light at the top for about 5 second until it beeps.

the parent unit waits for the signal then pairs.

Nov 08, 2010 | Angelcare Baby Movement and Sound Monitor...

1 Answer

Fisher and paykel smart drive 703 top loader, lights go on but pressing them even to start does nothing not start or let me change the size of the load ;(

Hi, just read your posting.Now the possible fault could be your display board.When you turn the power on to the machine from the power point do all the lights come on and you hear an audio beep beep , then the lights go out ?If that happens, then do you push start and can not select anything else like water temp or load size?Or do a series of lights light up and it beeps indicating a fault code after you have pushed the power button? Please reply and I can guide you throe step by step the process needed to fix this problem.

Jun 05, 2010 | Washing Machines

2 Answers

Wheelwriter 15 series II

The ribbon drive motor might be n/g. I think 6 beeps is the ribbon motor located under the gear on the ribbon cartridge.

Feb 08, 2008 | Lexmark Wheelwriter 1500 Typewriter

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

1,491 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5337 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides