Question about Sony Televison & Video

2 Answers

I bought a Sony DVP-FX921 and it's blocked for area 1. I need to use it Brazil, do you know how to unblocked it ?

Posted by on

  • 1 more comment 
  • msarmento Mar 17, 2011

    the list you sent does not include DVP-FX921.

  • msarmento Mar 17, 2011

    The I got doesnot include the model I have DVP-FX921

  • msarmento Mar 19, 2011

    Thank you... I was afraid of that... I'm going to try with DVD for aothers region than 4.
    Thanks

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sony Master
  • 1,536 Answers

This model is apparently hardwired to play only Region 1 (USA, Canada, Bermuda and US Territories) or All-region disks. (Some of the older players allowed you to change the region up to five times; on the fifth change, the last region selected becomes permanent.) You would need to get a Region 4 player to play Brazilian DVDs. Note: the region refers only to the area where the disks are sold; you can take Region 1 disks to Brazil and play them on this unit so long as you don't have trouble with import laws.

It is theoretically possible to hack the firmware to defeat or change the region code, but you would probably have to change the ROM chip to a custom-programmed ROM to do it. You could probably buy another DVD player for much less than the cost of the equipment needed to do the hack.

Posted on Mar 17, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,574 Answers

Please click on the link below:
Making the sony DVP-FX921 multi-region!

Posted on Mar 17, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I BOUGHT SONY DVD PLAYER MODEL VIDE DVP-SR650P.. WHICH TYPE OF VEDIO FORMATS CAN IT PLAY...


It can play mpeg-4 video and divx video.
If you want to know how to burn video to DVD to play on your DVD player, this burn DVD guide will help you a lot.

Aug 30, 2011 | Sony SCPH-10420 Remote Control

1 Answer

I need to unlock my dvd sony sr200p for brazil I bought it in the usa and it works only in region 4


i, too, am in brazil and having the same problem. we've rented a lot of movies and not had problems, but are having problems with one tonight. if you find a solution, please post it here. i will do the same if i find one!

Feb 19, 2011 | Sony DVP-SR200P DVD Player

1 Answer

I need a region unlock code for my Sony DVP-F25 DVD player. Help for the stuff region 1 S


sony dvd player bought in america and canada are designed to play region "1", "0" and "all" discs

Oct 18, 2010 | Sony DVP-F25 DVD Player

1 Answer

How do I unlock my Sony DVP - NS330 player, bought


Codes for-
Sony DVP-NS300, Sony DVP-NS305, Sony DVP-NS400D, Sony DVP-NS700, Sony DVP-S330, Sony DVP-S335, Sony DVP-S360, Sony DVP-S336, Sony DVP-S525D, Sony DVP-S530D, Sony DVP-S535D, Sony DVP-S536D, Sony DVP-S725D, Sony DVP-S735D
Turn on the unit with the remote controller, Wait until "no disc" appears in the unit's display. Press the keys: PAUSE, 3, 1, 4, 1, 5, 9. And "CODE" will appear in the display. Press the number key that corresponds to the disc zone you want to play within the next 5 seconds:0: All regions / 1: Region#1 / 2: R#2/... and so on. Then, within 5 seconds, press: PAUSE, POWER... and voilà. If you don't have good results, disconnect the equipment and repeat.
Or
Put your player in standby mode and then enter: [[0] [ENTER] Default Default region code [1] [ENTER] or [UP] [ENTER] Region 1 [2] [ENTER] or [RIGHT] [ENTER] Region 2 [3] [ENTER] or [DOWN] [ENTER] Region 3 [4] [ENTER] or [LEFT] [ENTER] Region 4 [5] [ENTER] or [TITLE] [ENTER] Region 5 [6] [ENTER] or [DVDMENU] [ENTER] Region 6 [7] [ENTER] or [RETURN] [ENTER] Region 7 [8] [ENTER] or [DISPLAY] [ENTER] Region 8
Or
Put player into standby modes by pressing power button on remote control. Then press Title button. Press Clear button. Press Power button.
Yours is not listed but these may be worth a go.
or try http://www.haldigital.com/hp/dvd.htm

May 15, 2010 | Sony DVP-NS330 DVD Player

1 Answer

Need unlock code.


I found this region hack here Sony DVP-NS575P region code , check it out:

"Warning
The following guide describes how I managed to make my Sony DVP-NS705V DVD player multi-region.

There are no guarantees that you will be able to do the same. Be aware that you will probably void any warranty you have and possibly even break the player.

Put shortly, you proceed at your own risk.

Introduction
First of all, the Sony DVP-NS705V can be made multi-region simply by applying appropriate service codes, you do not need to install a so called "mod chip".

This supposedly applies to the entire NS-series of Sony DVD players. There are some encouraging reports out there supporting this, but nothing has been verified by me. Again, if you choose to apply this guide to any DVD player, you do so at your own risk.

If you do find that this procedure works on another model, please drop me a line at sonyhelp@selen.org and let me know. Include the exact model number and original region of your player.

Update: Some users have reported success on the following players:

DVP-F21 (special thanks to Garry Self for this one)
DVP-LS500
DVP-LS755
DVP-LS785
DVP-NC615
DVP-NS300
DVP-NS305
DVP-NS310
DVP-NS315
DVP-NS330
DVP-NS333
DVP-NS355
DVP-NS360
DVP-NS400
DVP-NS405
DVP-NS410
DVP-NS430
DVP-NS433
DVP-NS575
DVP-NS585
DVP-NS590
DVP-NS700
DVP-NS730
DVP-NS765
DVP-NS900
DVP-NS905
DVP-NS930
DVP-PQ1 (thanks go to Michael Joy for this one)
DVP-PQ2
RDR-GX3 (thanks to Andreas Norman)
RDR-GX7 (thanks to Daniel Tapie)
RDR-GX300
RDR-GX700
RDR-HX900
RDR-HX1000


Please note that not all players behave exactly like the NS705. For example, some players do not display "success" when hacked.

Thanks to all who have contributed.

The infrared service codes required to make the update are available on the Internet. Unfortunately, not many people have an appropriate device to enter the codes into. You basically need a programmable remote (Philips Pronto, One-For-All) or a PDA (Palm, iPAQ) with suitable software.

This guide shows you how to make the update with a regular PC equipped with an IRDA port.

The procedure

1. Download the winsamp -package from Blank Frank's site.

http://www.veg.nildram.co.uk/remote.htm

This innovative piece of software allows you to send standard home electronics IR signals using a PC IRDA port.

2. Extract the package onto a bootable DOS floppy disk.

3. Download this IR code

http://www.selen.org/files/REMOTE.TXT

file and place it in the same directory as the package above.

This file holds the five necessary IR codes converted to the format used by Blank Frank's winsamp.exe. Please do not bother Frank with questions concerning this particular procedure.

4. Boot up your PC from the floppy disk and run winsamp.exe.

If your IRDA port doesn't appear as COM2 you may override this by using an appropriate command line switch. For example, use COM1 by running 'winsamp C1'.

5. Press the 'r' key to load up the codes into winsamp.

6. Make sure your DVD player is in standby mode and your IRDA port is within range.

7. Run the IR codes from 1 to 5 by pressing Enter on each corresponding button.

8. Your DVD player should start up and display the text "SUCCESS".

9. Repeat step 7. Your player should return to standby mode.

10.Your player is now multi-region."

Feb 10, 2009 | Sony DVP-NS575P DVD Player

1 Answer

Replacing MRI511 transistor


You need to replace complete power supply with following part number..

1-468-742-12 POWER BLOCK (HS8S2U)

Power supply is available in Part Store.

Part MR1511 can not be available and power supply of DVP-NS325
should not be repaired on component level.


Jan 22, 2009 | Sony DVP-NS325 Multi-disc DVD Player

2 Answers

Unlock regional code for Sony DVP-NS575P


1) Turn your DVD off. 2) Use the remote control and press: 
- Display 
- Top Menu 
- Clear 
- Power 
This should power the device into Service Mode. 
3) Choose option 2 and then choose option 4. 
4) There should be two fields: Input Code and Current Code, each one with 5 chars long. 
Type: 12450 
Then push zero on all the 5 places of the first and the second field. 
Push ENTER. 
5) There should be a zero on the device display, meaning that all regions are free. 
6) Press POWER to turn it off and you're done. 

Let me know if it works!

Dec 03, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74118 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...