Question about Washing Machines

3 Answers

Is there a lint trap or lint filter on this washer? It is a kenmore washer model# 11022622100. I seem to remember my old washer having one inside the lip of the tub but I can not find one anywhere.

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 170 Answers

On most 110 mods there was what they called a lint trap at the bottom of the wash basket.You can;t see it without taking the basket out (ya I know dum) you will need special tool to remove basket.that filter has now been replaced by whirlpool with 4 little plugs and the so called filter is removed.You can clean the old one and unit will be fine..for that job I would say to get a pro as it takes me about 2 mins to open and will save you as a home owner a whole lot of headaches..Hope I helped and Thanks for voting

Just a note that whirlpool made that machine.

Posted on Mar 17, 2011

  • Czerney Dort Mar 31, 2011

    Just a note as I see someone has said there is no lint trap. There is what whirlpool calls a lint trap and it does collect grap but problem is the homeower has no way of knowing about it or how to get to it . I assure readers that my info above is correct....good luck

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My maytag dependable care washer will not drain

Posted on Mar 20, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Washing Mach... Master
  • 2,122 Answers

There's no kind of lint trap that you need to clean,the lint gets pumped out into the drain,if you're draining into a sink you can buy filters that attach to the drain hose.what problem are you having?

Posted on Mar 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the lint trap on the Kenmore stacked washer dryer model 110.88752794


The lint screen is located on the back wall of the dryer. (Inside of the dryer.)
Here's a link to the owner's manual that may be helpful to download and print out: Kenmore 11088752794 Manual

Aug 26, 2015 | Kenmore Washing Machines

1 Answer

Model 41798702891 Kenmore stacked washer/dryer is collecting lint inside the door and putting lint onto the clothes.


I am not much of an expert with dryers but i'll give it a stab. Should there be a filter that catches the lint so that it does not go all over the clothes? Have you got the manual. If not, see if you can find the manual online and see if there is anything mentioned about a lint filter.

Dec 14, 2013 | Kenmore 98702 Stacked Washer/Dryer

2 Answers

My kenmore elite dryer that i bought 2 years ago lint trap corner is catching my clothes and tearing them. we had it replaced and its doing it again. I am tired of messing with it. Please help.


don't know if you already had this fixed,usually this is caused by not having your dryer cleaned out,the lint builds up inside the duct that the lint filter slides down into and has to be removed and cleaned out.also in some of the kenmore dryer ducts there's a metal clip inside the duct that can come loose and hold the lint filter up.these are the two most likely causes for this to happen.

Sep 23, 2013 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore model #22622100 top load washer. My question is our washer has a sour smell and we have pulled it out from the wall. We are wondering how to take the top off.


First, see the Sears parts site for your washer with diagrams and parts lists. Always a good reference tool.

http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Washer-Parts/Model-11022622100/0582/0153200?pathTaken=&prst=0&shdMod=11022622100

Next, see the following for how to release the console and remove the cabinet:

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=131&osCsid=0da65cea0e338fe930b1fde153a243f0

As a final reference, see the following Whirlpool / Kenmore Service manual for top load, direct drive washers:

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/f7e2147fa98b28cf85257122007475cb/$FILE/L-55.pdf

Feb 12, 2011 | Kenmore Washing Machines

1 Answer

My Kenmore 22642 washer is leaving lint all over the clothes. If i run them through the dryer, that will remove the lint... but some of my clothes don't go through the dryer. I can't seem to determine if...


Wash clothes separately whites and light colors together. Darks with liquid detergent. No lint filter on the machine. I have found some powder detergents do not dissolve completely.


Dec 26, 2010 | Kenmore 22642 Top Load Washer

1 Answer

Prblems with Kemore washer


Clean your washing machine before your next wash load to be sure there is no lint trapped anywhere in the machine. Fill the tub about half full of water then add a couple of cups of white vinegar to the wash water. Allow it to agitate and then sit there and soak for at least an hour before you empty the machine.
Lint is small fibers from clothing that have come loose from natural wear or laundering. They can build up in washers and wreak havoc on your clothing. The dryer will remove the lint. But with clothing, like dress shirts that are air-dried, this can be a real problem; often requiring multiple washings to remove the lint. Older washers came standard with removable lint traps that could be cleaned. Some would filter the water as it recycled through the washer, while others would require the removal of the center tub support for cleaning.
Newer washers have a self cleaning system that uses a filter to trap the lint and the spin cycle to flush it away. It saves the inconvenience of having to manually clean the filter.
If you have a lint problem, here are a few tips to try:
1) Low water pressure can impede the flushing action of the washer during the spin cycle. Look for pressure variations during filling of both hot and cold water. A kinked or blocked hose can cause this. Check for sediment in the hose as well.
2) Verify that the all of the water is being pumped out of tub and that no restriction in the drain hose exists.
3) Don't wash high lint producing items like socks and towels with your dress shirts.
4) Use a name brand detergent. They have higher quality cleaners and soften the water better, which helps release the bond between lint and clothing, allowing it be flushed away.
5) Don't overload the washer. Your washer needs water and room to remove the lint.
6) Run a wash cycle with a cup of regular white vinegar added. This will help rid your washer of any accumulated lint.
A washer doesn't produce enough lint to have any effect on a septic system, so a separate washer filter is not necessary.


Add a cup of either white or cider vinegar to your washing machine along with the detergent before loading in your clothes to keep lint off.

Sort out all towels and washcloths since they create lint. Put them through a separate wash cycle to keep them from transferring lint to your clothes.

Check the labels on all your clothing to be sure you sort them correctly. Cotton clothing produces lint in the washing machine while polyester clothing picks it up. Wash them at different times to keep the lint off those that are likely to pick it up.

Turn your clothes inside out before putting them into the washing machine to keep them from collecting lint as they go through the wash cycle

Jun 18, 2010 | Kenmore 24032\24036 Top Load Washer

3 Answers

Does this washer supposed to have a lint filter


No Lint Filter sorry you have a basic design washing machine, Dont replace it though it wont do u any justice just pocketbook pain

Jun 17, 2010 | Kenmore 44932 Front Load Washer

2 Answers

Samsung dryer DV448AEP/XAA - lint buildup


Yes this is rellatively normal as clothes are just not made the same way any more. You could turn down the drying temperature slightly and put in an anti static drying sheet but it won't make that much difference.

Oct 13, 2009 | Samsung Dryers

1 Answer

Lint problem


You must GRARANTEE full and free ari flow outside of the building. Typically this type of complaint is related to restricted air flow outside of the machine...normally there is lots of lint, and it exits through the filter, but when flow is restricted, lint remains inside.

Sep 14, 2009 | Kenmore 98702 Stacked Washer/Dryer

1 Answer

Kenmore dryer model 64781 no heat


if it is a top mount lint filter you can remove the back to get to it,if lint trap is inside the dryer you get to it in the front-do you have a meter?mike

May 21, 2009 | Kenmore Dryers

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

745 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...