Computers & Internet Logo
Posted on Mar 17, 2011

Unit will not start only gives 3 Beeps - IBM ThinkPad T42p: T42p Pentium M 1.8GHZ, 512MB RAM, 60GB 7200rpm HDD, 14.1 SXGA+ (1400x1050) TFT LC... (THINKPADT42PT42PPENT) PC Notebook

  • Anonymous Mar 17, 2011

    does anything get to show on the screen?

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 6 Answers
  • Posted on Mar 17, 2011
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Mar 17, 2011
Answers
6
Questions
0
Helped
1343
Points
19

Seems like it could be a memory problem, replacing the RAM or checking to the if it seated correctly would be the best thing to do.
If you have an AMIBIOS.


  • Three beeps means there has been a base memory read/write test error. Replacing the RAM usually solves this AMI beep code.
If you have AwardBIOS.
  • Any other beep code pattern you hear means that there has been some kind of memory problem. Replacing your RAM is the most you'll need to do to fix this problem.
Try looking at this for some new and faster RAM ddr-333mhz-4-ibm-lenovo-thinkpad-t42-pentium/q/sellerid/18914987/loc/101/219856812.html">http://www.buy.com/prod/1gb-memory-upgrade-pc2700-ddr-333mhz-4-ibm-lenovo-thinkpad-t42-pentium/q/sellerid/18914987/loc/101/219856812.html

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My Juki gives 3 beeps when I start up

https://www.youtube.com/watch?v=Mw0iFamTYMs

https://www.youtube.com/watch?v=CakM3FWKmGc

Three beeps that repeat after a pause and occur when you power on your computer indicate a problem with the system memory. Three beeps that play and then stop as the computer starts successfully mean that the BIOS was restored.
https://smallbusiness.chron.com/three-consecutive-beeps-mean-computer-79697.html


2helpful
1answer

Dishdrawer: Does not start, just beeps once

Some sensors on the unit are telling the controller there is a fault.
Most likely the sensor checking the drawer is open or close is giving a fault. It is likely the drawer has come off the rail.
0helpful
1answer

Running machines broken

Dear Sir:

Please adjust, clean very well, and tigh the connector from Reed switch see the diagram attached.

2) Tight the flexible cable from keypads + connector from display board vs lower board.

After your fix it RUN the software calibration for diagnosis +trouble

sincerely. God bless you
4_21_2012_3_31_45_pm.gif
0helpful
1answer

What might be the cause of hp pavillion dv2000 not displaying on the screen at start up and giving 3 beeps, 1 long and 2 short, sometimes it boot but doesn't get to the desktop area?

1 long beep followed by two short beeps is usually indicative of a failed/failing display adapter. On something as.... rustic as your dv2000 it can be fixed.... but probably would see better value from just replacing the unit.
1helpful
1answer

Start button will not initiate on cycle. Get 3 beeps.

Hi,
There can be many reasons why your dryer2_bing.gif will not turn...

This tip that I wrote will help you to figure out what is happening...

Dryer2_bing.gif Repair - The Dryer2_bing.gif is not Turning
http://www.fixya.com/support/r4422207-dryer_repair_dryer_not_turning

Dryer2_bing.gif Repair ? The dryer2_bing.gif will not start
http://www.fixya.com/support/r4460438-dryer_repair_dryer_will_not_start


heatman101
0helpful
1answer

Kenmore elite smart sensor model 110.6506 wont run

Many different possibilities. Could be thermal fuse, timer / control, motor. Start switch, or door switch. Most likely need to call service unless you have means to troubleshoot and test parts.
3helpful
3answers

It does not start, gives one long beep (about 2-3 seconds) silence and beep again

Switching DDR cards solved the problem. I was getting long beeps every 2 seconds. No short beeps. Just one long beep every 2 seconds. Thanks Josh Whitehead.
0helpful
1answer

IBM Workstation giving 3 short beeps in 3 sets- not booting

hi im josh in cebu phils. may i help you? the problem of your IBM pc is ROM errors that gives 3 beeps in series of 3 sets 9beeps in all.
You need to replace you cmos battery on the mother board.12voltd batt. it maybe empty thats why it beeps or go to setup bios.then restore all the defaults in your pc. and the last one no choice reflash or reformat your pc there maybe files that are missing.
3helpful
1answer

Hp pavilion dv2700 is NOT starting, only 7 beeps: 4 beeps pause and then 3 beeps. What's wrong ?

HP Romania give me the answer, RAM failure, i replace the RAM and everything is working fine, thank you HP Romania !
Not finding what you are looking for?

278 views

Ask a Question

Usually answered in minutes!

Top IBM Computers & Internet Experts

Brad Brown

Level 3 Expert

19187 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

ExpressFiX
ExpressFiX

Level 2 Expert

691 Answers

Are you an IBM Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...