Question about HP Computers & Internet

1 Answer

When download hp photosmart fatel error during installation appears error1935. download stops and starts uninstalling.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 659 Answers

If you have any firewalls or virus scanners running please remove them for install purposes only.

you can also go

Start--->Run--->type: msconfig---->in the general go to diagnostic startup---->accept, close and reboot

Install the software it should install now.

Then reboot

then goto

Start--->Run--->msconfig---->in the general options to to normal startup--->accept, close and reboot.

Now your software is ready for testing.

Alot of the HP Software has a issue with firewalls and virus scanners when being installed if that does not work go to the diagnostic startup again and try downloading the setup again if using a disk then chances are its gonna work fine.

Please let me know how you made out.

Posted on Aug 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My scanner stopped working. hp solution center says that the device installation is not complete. i have a hp photosmart 3210 all in one. it was working the last time i used the scanner.


You probably need to uninstall and re-install the Latest Drivers for your printer

To uninstall you can do it from the Software disk you recieved with printer.
Insert the Disk in CD ROM and Click uninstall from HP Printer Menu

OR If you dont have the disk, you need to manually uninstall the Software
( Disconnect the USB cord before uninstalling )

Click START - Open Control panel - Add/remove Programs ( XP ) / Or Programs and FEatures ( Vista/Win 7 )
you will find list of HP Programs installed..

Choose one by one and uninstall these programs
1. HP Customer participation program
2. HP Imaging Device and software
3. Software and drivers for Photosmart 3200
4. HP Solution Center or HP Director
5. HP Image Zone ( or Image Zone Express / HP Photosmart Essential )
6. HP Update
7. HP Printer Drivers/Diagnostic Drivers
( after every Uninstall you will be prompted to restart the PC, you will find an option [ Click here to restart later ]. click on it and restart the PC once you completed uninstalling all the above programs )

Once you have uninstalled - click on this link to download the latest drivers by choosing your operating system

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=439488&lc=en&cc=us&dlc=en&lang=en&cc=us

Save this File on Desktop an run it

Jun 16, 2010 | HP Photosmart 3210 Printer

1 Answer

Receive fatel error 2753 when installing driver from cd


Driver is old or corupt, follow this link bellow to get to HP download site, select your Operating system and download, select install now and all will be well.
This will help, any problems, go run all windows updates, then start again.
Good luck

Dec 23, 2009 | HP LaserJet 3050 All-In-One Printer

2 Answers

I'm can't load the software for my HP AIO Photosmart C6180. Get a MSI error that I can not repair. Need some help here.


Hi Try downloading the software from the HP website http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=ph〈=en&product=1153494& then run the setup on the downloaded file, if you have vista or windows 7 then right click on the setup file and select run as administrator. Hopefully this will solve the msi error, if it does not, please tell me exactly what error you receive.

Dec 06, 2009 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

HP Photosmart C7280 installation error- software will not load


though i need to know abt the os platform..

itz probably a problem of faulty/defective ram..this can also b a symptom of faulty/defective of RAM..pen clean/remove carbon & or oxide formed on the teeth with an eraser n resit it..[it'll b more prominent, that if itz cause by ram or not,..if during normal operation, a Blue Screen appears/Memory Dump]
(though, sometimes itz also caused by the m/b)..

check the data cable..

howevr, hv a licensed and UPDATED antivirus installed (i prefer avg/kaspersky, remember, without updation a full version antivirus is useless)..
download, install n run microsoft kb890830..http://www.microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en..
download n run Startup Control Panel..http://download.cnet.com/Startup-Control-Panel/3000-2094_4-10039330.html..'remove all the unnecessary startup items from here..(if u can't find what to remove,post me/us in ur comment with all the items listed in each n every tabs herein)..
remove all unnecessary software from add/remove programs..
download, install n run 'Advanced System Care Pro'..http://download.cnet.com/Advanced-SystemCare-Pro/3000-2086_4-10399324.html..
disable the following: a) 'Automatically Restart' right click on my computer->properties->advanced->startup n recovery->(uncheck on the) Automatically Restart; b)'ErrorReporting' right click on my computer->properties->advanced->error reporting->disable error reporting->(uncheck on the) 'but notify me when critical error occur'..
Increase the size of Virtual Memory, Initial: 1440; Maximum: 2880

for professional supervision, contact ur system admin/vendor....

Nov 11, 2009 | HP Photosmart C7280 Laser Printer

1 Answer

During installation, device is not detected error appears. tried uninstalling software, unplugging cables, restarting, reinstalling, then plugging cables in. did not work. Windows XP o/s. already checked...


is it wireless or usb, if it usb, dont connect the usb cable. on the installation window where it asks for the usb cable, chek mark on the option connect printer later and continue with the installation

Oct 02, 2009 | HP PhotoSmart 7760 InkJet Printer

2 Answers

Hp photosmart c4480 installation error 1935


1. Go on HP website
2. Go the Support and Drivers
3. Select Download drivers and software (and firmware)
4. Type in Photosmart C4480
5. Select Operating System "Microsoft Windows Vista"
6. Select HP Photosmart Full Feature Software and Drivers
7. Click "Download Only"
HP Photosmart Full Feature Software and Drivers
HP Photosmart Full Feature Software and Drivers

Jun 16, 2009 | HP PhotoSmart C4480 All-in-One Printer ...

1 Answer

An error occured during the installation of the


Step one: Uninstall the All-in-One software Even if the installation failed, some HP software components might have installed on the computer. Follow these steps to use the Windows Add or Remove Programs tool to uninstall the software.
  1. Disconnect the USB cable from the product.
  2. Click Start , and then click Control Panel .
  3. Click Add or Remove Programs . The Add or Remove Programs window opens.
  4. In the Currently installed programs list, select the following items if they are listed:
    • HP Officejet/Photosmart/PSC All-in-One software 9.0
    • HP Imaging device functions 9.0
    • HP Customer Participation program 9.0
    • HP Solution Center 9.0
    • HP Photosmart Essentials 9.0
    If the list of installed HP programs contains any version numbers less than 9.0, select the following items if they are listed:
    • HP Officejet/Photosmart/PSC All-in-One software XX (where XX represents a version number less than 9.0)
    • HP Imaging device functions XX
    • HP Customer Participation program XX
  5. Click Change/Remove , and then follow the on-screen instructions to uninstall the software.
    NOTE: If a prompt displays asking you to remove shared files, click No . Other programs that use these files might not work correctly if the files are deleted.
  6. Restart the computer when prompted to do so.

Apr 24, 2009 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

HP PHOTOSMART ALL-IN-ONE C5280 FATAL ERROR DURING INSTALATION /ERROR SITUATION CODE 10004232 SAYS ERROR ACCURED IN THE SCRIPT PAGE


Make sure that all the software and driver is already uninstalled then download and install the software and driver found on the link below. If it fails to uninstall completely you may need to run a registry cleaner or perform a system restore.

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=ph&lang=en&product=3204464&

Oct 14, 2008 | HP Office Equipment & Supplies

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...