Question about Malber WD1000 Front Load Washer/Dryer

1 Answer

Hi Folks, I have just realized why my Malber needed repairs after I first moved it seven years ago; I didn't have the transit spacers when I bought it second hand from a Polish couple. I have just moved again, and the people who used to service Malber in my area no longer do so. How do I track down some transit spacers for my next move, and is there any internet listing of Malber repair people? I live in Kitchener, Ontario Thanks for any help you can offer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,277 Answers

Hi from retired Englishman in SW France,

Sorry. I doubt anyone on this forum could give you that information. It's just made up of ordinary guys and gals, probably at home, from all over the world, with experience of addressing problems and giving guidance for free on the web ;-0)

You will either have to search in local telephone directories OR stay on line and search for 'malber washer service' for instance or 'malber washer spares' and hope that you can find someone reasonably local.
Sorry again ;-0(
Good luck,
John C

Posted on Mar 16, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My fiat uno had a smash on the left hand front,bought it replaced the parts and now its not moving,m opening her up today and need to know if I should use 25mm spacers,please help.thanks,shabs.


what is not moving.???
let me give you some advice.
get the car inspected for safety after any crash.
by any ASE certified tech.
your life can depend on this. and others too.

damage is unlimited.
post photos of damage.
why think blind folks can help with damage.?
get it inspected .
sometimes there is brake system or supsension system damage that
can cause even a bigger Crash.

May 24, 2014 | Cars & Trucks

1 Answer

Spin cycle not working on Malber washing machine, it is on a used boat we just bought and it is in Fort Lauderdale but coming to NY soon, boat broker says he cant locate a person to fix the Malber- an


In New York, call Malber Distribution Corp at 516-323-5299.
They can schedule a technician to fix your machine. They've been fixing Malbers for about 25 years.
Tell them Mike, in Wash DC, says hi.

Mar 06, 2014 | Malber WD1000 Front Load Washer/Dryer

1 Answer

Sony DSCTX9 Digital Camera - Display Issu


If it is seven years old, it will be beyond economic repair - replace it.

May 16, 2017 | Sony CyberShot DSCTX9 Digital Camera

1 Answer

I have put an 1989 350 engine in a 1983 chevy truck. Do I need a spacer between the block and motor mounts before I set the engine down in the truck?


You didn't mention what was in the 83. If it was a V8 smallblock, then no changes need to be made. All smallblock engines have provisions for engine mounts in the exact same places beginning in 1958.
If the engine had a 6 cylinder or a big block engine then you'd need to change the mounts. The mounts are bought according to the vehicle year they are used in. So, all smallblock mounts will fit your engine but may not match the holes in the chassis unless they are for that vehicle and year. (some do interchange though). Either way, no spacers or adapters are necessary..

Jul 27, 2011 | 1983 Chevrolet Silverado

2 Answers

Malber dryer 2 years old


move the dial to the "off" position first; wait for beep; then move to the drying setting you want, and wait for another beep.

Jan 06, 2008 | Malber TD700 Electric Dryer

1 Answer

Spacer and balance


The Malber has spacers but does not have a lever in the back so I am not sure what brand of machine you have. If it is the Malber, the spacers in the back are internal and need to be removed. They can be accessed by removing the hex screws and then removing the back panel. The spacers should fall to the bottom of the machine when the hex screws are removed. They can then be retrieved easily with the back panel removed. Be careful reaching into the back of the machine as there are many sharp edges in there.

Sep 16, 2007 | Malber WD1000 Front Load Washer/Dryer

1 Answer

Lens cover doesn't open


Check out the Tech support Team at NIKON Don't fiddle with it your self - this is a very delicate mechanism At fours years old- it is likely that a new camera is the only remedy.

Jun 29, 2007 | Nikon Coolpix 775 Digital Camera

Not finding what you are looking for?

Open Questions:

See all Malber WD1000 Front Load Washer/Dryer Questions

Malber WD1000 Front Load Washer/Dryer Logo

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Malber Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

ashburton

Level 3 Expert

417 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Malber Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...