Question about 2wire (1000-400108-001) Router

2 Answers

I want to allow port forwarding for remote desktop use, or enable the upnp? Any ideas?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,623 Answers

You will need to enter the router setup menu and allow port forwarding there. This requires some knowledge of how the router works. An easier way of doing what you want is to install teamviewer on both computers and then you will be able to do what you want without any configuration. download onto both computers from here www.teamviewer.com

If you found this info useful please vote for me

Posted on Mar 16, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,153 Answers

I use both methods

UPNP for its media streaming ability to my media boxes

Port forwarding for specific games and applications on my server.

Without knowing exactly what you are trying to do its hard to give a definite answer.

If its just for a few games then port forwarding would be my suggestion

Posted on Mar 16, 2011

  • Project NOMAD
    Project NOMAD Nov 04, 2011

    -online 4u adipex advicer baccarrat blackjack bllogspot booker byob car-rental-e-site car-rentals-e-site carisoprodol casino casinos chatroom cialis coolcoolhu coolhu credit-card-debt credit-report-4u cwas cyclen cyclobenzaprine dating-e-site day-trading debt-consolidation debt-consolidation-consultant discreetordering duty-free dutyfree equityloans fioricet flowers-leading-site freenet-shopping freenet gambling- hair-loss health-insurancedeals-4u homeequityloans homefinance holdem holdempoker holdemsoftware holdemtexasturbowilson hotel-dealse-site hotele-site hotelse-site ****** insurance-quotesdeals-4u insurancedeals-4u jrcreations levitra macinstruct mortgage-4-u mortgagequotes online-gambling onlinegambling-4u ottawavalleyag ownsthis palm-texas-holdem-game paxil ***** pharmacy phentermine poker-chip poze ***** rental-car-e-site ringtones roulette shemale shoes slot-machine texas-holdem thorcarlson top-site top-e-site tramadol trim-spa ultram valeofglamorganconservatives viagra vioxx xanax zolus

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i enable upnp on ZNID24xx-Router ?


Get the manual from here

http://setuprouter.com/router/zhone/znid-gpon-2426-uk/manual-1298.pdf


There is no UPNP on this router. The best you can do is put it into bridge mode and add a router on the LAN to do port forwarding as it is not possible on the OTN described here.

Dec 20, 2014 | Computers & Internet

1 Answer

Port forwarding 3G21WB Problems


This WEB site assists in setting up port forwarding by make and model of your router.
Port Forwarding Guide by Make and modelhttp://portforward.com/

Mar 16, 2012 | Computers & Internet

1 Answer

HN9000 won't pass remote services


On the Router check if you have UPnP enabled, if yes then Disabel it that should fix the NAT issue and then you need to open the port number 1723,3389. Once these ports are opened then you will be able to access it on the VPN and Remote Desktop Provided you have a WAN IP Address from your ISP. also check the Firmware of the router if its updated or not.

Mar 26, 2010 | D-Link Xtreme N DIR-655 Wireless Router

1 Answer

How do i enable port forwarding on my router?


Port forwarding is you need to know what address you to port fowarding. It is usually under the administration tab.

Nov 21, 2009 | Hawking HBR49 Router

1 Answer

Dell Video Chat vs Firewall settings


You need to allow traffic on UDP port 9000. You may be able to enable port triggering, or uPnP to achieve the same effect, without forwarding a port manually.

Here's a link to instructions: Link

Oct 24, 2009 | Arris SURFboard SBG900 802.11g/b...

1 Answer

Portforwarding for D-Link DFE-520TX


The port forwarding needs to be done in the router.
You may simply be able to enable UPNP in the router and get the console to work. So, login to your router and enable upnp and then try the game again....chances are that this will work fine.
If not, you will need to forward the correct ports to the device or put the device in the DMZ.

Mar 14, 2009 | D-Link DFE-530TX Network Adapter

1 Answer

Router problems


You have to manually go into the router and make sure the port forwarding and UPNP setting is set to enable. Then make sure in your services on your computer allows for UPNP devices. That should work

Dec 08, 2008 | Belkin Computers & Internet

1 Answer

Port fowarding and remote desktop


Port forwarding is not the only thing that you have to enable to access your home network. Firstly do you just want to access your router from the outside? If that is the case enable remote login via the administration tab.
If you want to login to your computer from the outside then you must first enable remote desktop and enable port forwarding on your router.

You enable port forwarding for port 3389 which is the remote desktop port. So start port is 3389 and end port is 3389 after that set a static IP on your computer that you want to access.
You can enable remote desktop by following the directions below at the link '

http://www.microsoft.com/windowsxp/using/mobility/getstarted/enableremote.mspx

After doing this. What you do is go to the status tab of your router. Look at the IP there.

On the remote computer lauch remote desktop and enter that IP then click connect. IT will then ask you for the username and password of the computer behind the router that you want to login to. After that you should be able to get in.

If you need any clarifications regarding this you may message me and id be glad to help.

Oct 06, 2008 | Linksys Wireless-N WRT150N Router

1 Answer

I need to configure my d-link for wow downloader


To configure D-Link DI-624 Wi-Fi access point to work with BitTorrent you have several options. One of them is to use trigger ports.
Steps to follow:
  1. Open web control panel of D-Link DI-624 by connecting to http://192.168.0.1 (this is default direction, which can be changed by administrator).
  2. Enter login and password for administrator. Default login for administrator is admin.
  3. Go to Advanced, select Applications.
  4. In Applications screen:
    1. Check Enabled.
    2. Fill BitTorrent in Name.
    3. In Trigger Port put 6881 and 6999.
    4. In Trigger Type select TCP.
    5. In Public Port put 6881-6999.
    6. In Public Type select TCP.
    7. Press Apply.
  5. The DI-624 will reboot.
Now you can use BitTorrent from any computer on both LAN and WLAN local networks in automatic way.
BitTornado Setup If you use latest experimental BitTornado client you can give a good use toUniversal Plug and Play (UPnP). You just need to enable UPnP on D-Link DI-624 and BitTornado will work on any computer in your local network without any requiered intervention from your part.
In BitTornado:
  1. Run BitTornado
  2. Click on Prefs
  3. Locate UPnP Port Forwarding and select type1 (fast)
In DI-624:
  1. Log in as administrator
  2. Open Tools (main menu)
  3. Select Misc. on the left
  4. Locate UPNP Settings and select Enabled

Jun 30, 2008 | D-Link 802.11g Wireless Router WBR-1310...

Not finding what you are looking for?
2wire (1000-400108-001) Router Logo

697 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a 2wire Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...