Question about ASUS K8V-MX Motherboard

1 Answer

Asus k8v-mxis not recognise 250gb seagate harddisk

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 902 Answers

You will need to go to asus website type in that model number to update your sata/ide drivers. BUT FIRST if its connected via a ribbon gray cable (ide) ther eis a white jumper on the back of the hard drive the jumper may be black anyway it needs to be set into slave mode it will be listed on the hd on how to do that LET ME KNOW IF THAT FIXED IT.

Posted on Mar 16, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Seagate SATA3 (ST3000DM001) not detected in Seagate SATA3 (ST3000DM001)


restart and HOLD the keys CTRL or FN +f11 or f12 depend of you mark, and go to restore factory default and ready.
Some computer can use F2 or esc for enter BIOS setup depend of your mark too
God bless you

Jul 13, 2013 | ASUS K8V-MX Motherboard

1 Answer

Mobo: ASUS K8V-X Does not detect Seagate SATA3 (ST3000DM001)


restart and HOLD the keys CTRL or FN +f11 or f12 depend of your model, mark. and go to restore factory default and ready
However some mark can use the f2 or esc for ENTER the BIOS setup too.
God bless you

Jul 13, 2013 | Computers & Internet

1 Answer

Harddisk is not detected


If you mention what types of hard disk you are using it will be very easy to tell you why it is not detected. any way see this link it will be help full for you.http://support.asus.com/faq/detail.aspx?SLanguage=en&p=1&m=K8V-MX&s=20&hashedid=dJ2XP7zr8tzeYbLp&os=&no=967AE01F-E477-0A29-4EC2-A6455EE3B94E

tanks.

Apr 18, 2012 | ASUS K8V-MX Motherboard

1 Answer

ASUS K8V-MX Motherboard recognizing 320 GB SATA harddisk. Why?


It could be that your BIOS needs updating for this motherboard. Take note of your BIOS version when your computing is booting. Try hitting the Pause key to freexe the screen, but if no luck go into BIOS and see if the BIOS version is listed. You typically get in BIOS by hitting the "Delete' key on your keyboard when the computer starts up and the first bunch of words appear in white characters (might be a light grey)
Go here:
http://usa.asus.com/product.aspx?P_ID=dJ2XP7zr8tzeYbLp&content=download
Latest BIOS (note its a beta version ie not formally released) is
K8V-MX Beta BIOS 0501
Latest beta BIOS.


Feb 17, 2010 | ASUS K8V-MX Motherboard

1 Answer

I've dropped my Western Digital 250gb hard drive & now its not working. The light on the device does light up & the computer recognises that something has been connected but you cannot see the...


I've similar problem with Samantha_500, i inadvertently dropped internal Harddisk (Seagate 80GB) with external case (M-Tech), the external case was broken into pieces (only the parts with plastic), the Harddisk is not working anymore, it detects by windows XP as a device connected in USB, but no drives detected in windows explorer. is there any way to recover this harddisk? thanks for the help in advance.

Dec 26, 2009 | Western Digital Passport WDXML800UE...

5 Answers

Unrecognized HDD-- need help!


You could also try setting the jumper on the hard drive to "limit to 1.5gb/s".

Oct 04, 2008 | ASUS K8V-MX Motherboard

1 Answer

ASUS K8V-MX Motherboard with 250GB SATA HDD and 250GB IDE HDD Problem


Hi LP,
I’ am very familiar with ASUS motherboards. I am thinking you have posted two questions or more referring to the,
ASUS K8V-MX board. When you sign into you're FixYa account you than need to click on you're profile. Within you're profiles are the questions you have posted. Click that question to add or see the expert's answer. If you need another question (about the same item) re-post within that same question. You can even copy the link to an older post & past that link into you're next question. (Than I can read you're last question & my responce).
LP you have me all mixed up. I'll answer the question you have posted above. In the future please provide you're old post so I understand better.

There is nothing wrong with IDE 250GB drive or the SATA drive.
The problem you are haveing is setting the correct settings.

The ASUS K8V-MX can support two serial ATA SATA drives. The SATA drive's can only run at 1.0 version. 1.5GB transfer speed & not SATA II, the 3.0GB speed.

How to setup the SATA drive?
Please disconnect any other drives (IDE) & a second SATA drive that may be connected to the system. Except the CDROM drive.
Using you're manual the SATA drive should be connected to SATA1 port. Page 1-24 in you're manual.
Put you're windows CD into you're CD-ROM drive & boot the PC. You will see, Press any key to boot from CD... (press any key on your keyboard). Windows will start to install. Durring installation of windows the system will restart. You will again see, Press any key to boot from CD... (DO Nothing)!
Just allow windows to conintue on its own. Windows will continue to install it's self. This will happed once again, & again do nothing. Windows will finish installing it's self.
After windows has finished, load the ASUS CD into you're CD-ROM drive & install it's driver software. Restart the PC.
You must register windows. Do so.
Than update windows through windows update service. (This will take some time to complete). (Do not install service pack 3).
If you have an IDE drive 250GB in size & you installed windows on it. You must erase the drive or it will conflict with you're new installation on the SATA drive. To do this, look on the IDE drive & you will find a large white sticker. Printed on there is instructions of how to set the drive pin. Set the drive up as a slave drive. (This is only temporary).
Power off the PC & unplug the power cord. Connect the 250 IDE drive's power cable & data cable. Plug in the power cord to the PC & turn on the PC. Windows will load. Right click once on the start button & slide up to & left click on Explorer.
Find the 250 IDE drive, it should be drive letter D or E. Right click the proper drive letter & format the drive.
( Do Not format, Local_Drive C:\ ). Once the format is complete, power down the PC by clicking on the start button & click turn off the computer. Once off, unplug the power cord. Change the pin on the 250GB IDE drive to Master with a slave. Take the 40GB drive & change it's pin so the 40GB drive is a slave.
Connect the 250GB drive to the end of the IDE data cable & connect the 40GB drive to the next connector of the same IDE data cable. Re-check all power cables & data cables for good connections before closing the case. Plug the power cord in & power up the PC. Everything should run just fine.
Setting the pin for you're IDE drive's can be very confusing. Click on the link below. This will give you an idea of how to set you're pin for a master drive, master with a slave drive. If you post the name ST****** of you're two drives I can post the correct pin locations from Seagate's web site.
http://www.seagate.com/images/support/en/us/mxo_ata_jumpers.gif

Have more questions about this post?
Good luck!
Mike

May 21, 2008 | ASUS K8V-MX Motherboard

2 Answers

Sata driver


check for the website of your HDD vendor.eg-www.seagate.com for seagate hdd.
make sure you format using fat32 file system.

Jan 28, 2008 | ASUS K8V-MX Motherboard

1 Answer

NEED FOR K8V MOTHREBOARD SATA DRIVER


there are 4 different k8v motherboard types, you didnt say which variant?

 

but you shouldnt need any 3rd party drivers, either the one built into the cmos, or the ones that are on the cd rom that comes with the motherboard should work fine with win2003.

they have always been fine on my installs, just ignore the question on the initial setup, its only asking incase you need to use one, you dont have to.

 

Oct 17, 2007 | ASUS K8V-MX Motherboard

Not finding what you are looking for?
ASUS K8V-MX Motherboard Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David
David

Level 3 Expert

778 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...