Question about Hughes DIRECWAY Professional Business Solution Special Offer - $99.99 Down and $129.99/month for 15 months... (DITDW6000PROSP)

Open Question

Hi! i have a HN7000S modem Hughes all lights blink could you help me

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 43 Answers

SOURCE: LAN port of my HN7000s modem is faulty and only power light is on

yes its a problem related to the firmware

contact you ISP and ask them to upgrade the firmware on your modem.

Posted on Apr 13, 2009

  • 11800 Answers

SOURCE: My HN7000S modem has the

A blinking System light signals that your satellite router hasn't been able to load its firmware. The only thing you can do (if you have finished all the payments and now it's yours to mess with) is to perform a hard reset - open the case an next to the power source circuit you will see a set of points on the board; one of them will be clearly labelled RESET; connect this point to the point for the ground. If even after that there's no change then sory, it's dead.
If you're still paying for it then call them for a replacement.

Posted on Aug 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I change the password in a HN7000s IPS modem


Dear Jacques,

Here is a link to the for Hughes HN 7000S IPS Satellite Cable Modem Receiver for the manual with the information you are seeking. http://www.cpe-labs.com/PDFs/HughesNet/DW6000CustomerGuide.pdf
On page (16) sixteen within the PDF identifies all the contact numbers you will need to receive world wide help to assist you with your process.

On page (17) System Control Center explains in detail the internal web server that answers to the address for the DW6000 & DW7000. For the DW7000 follow this link
http://192.168.0.1/. Then to http://www.systemcontrolcenter.com/ .

On page (19) is the portal for your Direct way devices at this link
myhughesnet com .


On page (20) you will find, " How to change your email account password".
At page (37) Broadband Reports.com offers a satellite forum at this link
What browser proxy settings should use with the DW6000 Satellite Forum FAQ...

In conclusion, on the last page of the report title, Direcway Service Plans Ku Band DW7000 NTI,
you are offered a technical support telephone number to contact. It is 1-866-DIRECWAY.


Fare. Well.

Dec 28, 2014 | Hughes Hn7000s Ips Satellite Cable Modem...

1 Answer

Problems with setting up wireless router wrt310n, wireless printer Dell 968W, Dell XPS laptop and Hughes net


Try reseting the wireless router, theres a reset button hold it down for 30 seconds.

Oct 05, 2008 | Computers & Internet

1 Answer

I hit the "rescue button"


Normally phone support should be able to take care of your problem without ever stepping foot in your house. Good luck!

May 22, 2011 | Hughes Computers & Internet

1 Answer

My power light on my hughes modem is blinking all the other lights are not lit...help!


your cable is faulted & your rj45 connector may be damaged so change your whole cable

Jul 03, 2010 | Computers & Internet

1 Answer

Router will not route to another router of same type


The hughes modem is not a router.
What are you trying to do? Install the Linksys?

Plug the ethernet port on the Hugnes to the "Internet" or "WAN" port of the Linksys.

Then if you go into the config of the Linksys, you can tell if it gets a public IP address.

May 21, 2009 | Linksys Computers & Internet

1 Answer

Cant hook up


ok... so im guessing your using sat for internet, so you would set one plug with zyxel PL-100 and it sending signal in, while adding zyxel PL-100 a computer works, and another craps out... Solution: use a router
insert satalite into wan port, set up router
run a client wire from the router to a zyxel PL-100
and the others should pick up off that one..

like so.. :direct from zyxel website specific for pl-100

http://www.zyxel.com/upload/images/app_diagram/app_pl100_550x0.gif

Apr 22, 2009 | Computers & Internet

1 Answer

LAN port of my HN7000s modem is faulty and only power light is on


yes its a problem related to the firmware

contact you ISP and ask them to upgrade the firmware on your modem.

Apr 13, 2009 | Hughes DIRECWAY Professional Business...

1 Answer

Hugesnet HN7000s Modem Only the power light comes on.


what seems to be the issue? i'm a hughesnet install/repair contractor

as a catch-all heres some places to start....

we'll start with the 5 lights on the front of the modem:

the top one tells you if the ethernet cable is plugged into anything.... if it's off check to make sure that cable is plugged in. if it is....replace the ethernet cable, they are cheap and available virtually everywhere from walmart to radio shack.

the next 2 lights are for transmit and recieve.... they should blink a lot but not in any particular pattern. if either of these lights is acting funny you could have cabling issue (ie: improper fitting, rust on the line, messed up groundblock, or even a severed cable), a misaligned dish, or even a blown radio (its far more common to blow out the radio than to blow out the modem...especially on those 7k systems) you might be able to correct the cable issue yourself with the right tools, but DO NOT attempt to re-align your dish....its touchy. btw i should state that if hughes catches you monkeying with your hardware they'll yank your warranty....either dont do it or dont get caught.

next light down is the "system" light. this tells you if you are connected to hughes. this light will be OFF of there is a problem with the transmit and recieve. if there is no problem with the transmit/recieve and this light is off there could be a billing problem at the other end. contact support.....you'll get a guy in india or the philipines or something that says his name is "harry" or "john" or "fred" or something american sounding. this always cracks me up.

next one down is the power light. if you have other lights on but the power light is off it indicates a broken modem...no way around it, you're gonna need a new modem.

ok, on with the trouble-shoot. if your top light is on you should be able to use your computer to look at the modem using a browser (firefox, internet explorer, safari, etc) type in 192.168.0.1 in the address bar. you should get a interface with some colored buttons across the top. the system status button should be green...any other color means trouble. the other 3 should be blue. if you cannot connect to the interface the trouble is user-end...bad ethernet cable (as mentioned before) or something beyond-the-line from the modem is messed up (router, computer, or something)

if you have any red lights you can click on them to see what's wrong. any problem areas will have red flags with error codes next to them. write these down as they are useful to diagnose what is actually wrong with the system.

if your system status button is yellow, click it....most likely you have "fapped out" (violated hughes' fair access policy) btw you can look at your signal strength too....there is no way to tell you what the signal strength should be since i dont know which bird (satellite) you're pointed at. each bird has a different acceptable signal strength.

let me know what you find and i'll see what i can do.

Mar 28, 2009 | Hughes DIRECWAY Professional Business...

2 Answers

Default IP Adress of the modem Hughes HN7000S


The Hughes addresses are 66.82.4.8 and 66.82.4.12.

Mar 06, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hughes Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Hughes Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...