Question about Toshiba 50HPX95 50 in. Plasma HDTV

1 Answer

My toshiba 50hpx95 has a steady blinking red light, it has no pauses or breaks to recite a code, just steady blinking. I had it in the shop and they said the power board needed replaced, so i replaced it and still get the same code. Is there a trap reset, or other mode of reset that i am not finding in the "service" manual, or was the problem misdiagnosed by my repairman. I cant even do a boot via service code thru the remote. is there a way to do a soft boot under low voltage so the chip can give me a diagnoisis of which board is the culprit? No hanging or bulging caps... everything looks good.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toshiba Master
  • 8,457 Answers

This tv have a Tuner signal board it is also dead too,this problems happen sometimes,the power supply board dies,but sometimes the Tuner signal board take power surges from the power supply board itself than kiill the tv Tuner signal board too.Try website like Ebay.com to buy a refurbish tv Tuner signal board for the replacement.Fixed this problems,many times before.Blinking power LED light.First replaced the power supply board,than didn't solved the problems,than the tv Tuner signal board it is also dies too.

Posted on Mar 16, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Toshiba 50hpx95 plasma tv with a blinking red light. I have already replaced the power supply board and the problem is still there. I need help


I'm no TV expert, but I can share what little knowledge I have, specially what I went through with my plasma TV. It happen in mine, and I got the Y Board fix. When mine was blinking, there was no power, but it wasn't the power board, so searching for an answer in the internet, I found out that it could be one of the boards (Y board or Z board) In my case was the Y board, so I took it to a professional and he fix it for me. IF possible search for: How to troubleshoot TV Y Board.

Mar 02, 2015 | Toshiba 50HPX95 50 in. Plasma HDTV

1 Answer

Toshiba 57H81 Blinking power light


Greetings,

Power supply cannot sustain / provide juice to the whole system.
If you are qualified to do electronics, check the power supply section, otherwise contact a repairman.

Keep us posted and thank you for using our service.
FixYa for all your troubleshooting needs.

Jun 29, 2008 | Toshiba 57H81 57" Rear Projection...

1 Answer

My TZ61V61 rear projection 60 inch television turns off randomly. The red light by the on/off switch blinks. Sometimes the TV will still work though.


The blinking red light is telling you the code. Watch how many times it blinks. when it pauses for a seccond, watch again. Write down the number of times between each pause. Then repost with that info and I might be able to figure out what is wrong. Hopefully before it is permanent.

Jun 11, 2011 | Toshiba TZ61V61 61" Rear Projection...

1 Answer

Is the red flashing light on evaporator circuit board normal.


some units just shine steady others steady blink as normal,,the trick is does it blink a number of times then pause this indicates a code. some will display multiple codes at one time, generally there is a sticker on the access panel inside or out with a listing of codes. thank you and hope this answers your question, most units have safety proticalls to prevent the unit from working under dangerous conditions

Feb 03, 2011 | Heating & Cooling

1 Answer

My toshiba 50hpx95 plasma tv makes just a clicking noise from the relays on the power supply but nothing else wont power on and no lights flashing


A common problem with modern power supplies is dryed out capacitors in the power supply, This pulls down the voltage and shuts down the tv. The can usually be spotted if you know what to look for (they swell up and deform a little). It is not a job for the novice. But capacitors are cheap.
Try a local tv shop for estimate
pete

Nov 08, 2010 | Toshiba 50HPX95 50 in. Plasma HDTV

1 Answer

Flashing red light on ice maker control


Hi

I have Kitchen Aide refrig. Resently, we had a power surge which seems to have done something to the ice maker control. immediately after it stopped making ice. It has since started to make ice but very slowly. Before the controller blinking red light blinked and paused steady. Now, it blinks two red and pause steady. Is this repairable?

Thanks

Jul 16, 2009 | Whirlpool Refrigerators

1 Answer

How to bypass seine card? 50hpx95


Turn off set, unplug power. Remove back cover. On brown circuit board left of center, unplug connector PJ63A. Plug in power, but don't electrocute yourself! If you no longer get the continuously blinking red light, hit the power button. If it comes on, the SEINE module is bad and must be replaced.

Dec 13, 2008 | Toshiba 50HPX95 50 in. Plasma HDTV

1 Answer

Red light flashing. TV wont start.


Bypass the SEINE module if you know how. If you use off air HD you will have to get a new module.

Sep 26, 2008 | Toshiba 50HPX95 50 in. Plasma HDTV

2 Answers

Red light blinking on power button. won't turn on.


need to know the model and if it blinks a certain number of times with a pause then blinking again.

Apr 11, 2008 | Televison & Video

1 Answer

Toshiba 50hpx95


How much electronic or solid state repair experience do you have. Can you read a schematic and follow circuit flow from one circuit to another? Do you know how to use a multimeter? If you say no to one of these, this is not the repair for you. If you say yes, send the service manual to techman32k@yahoo.com and I will take a look. Good Luck

Oct 16, 2007 | Toshiba 57H82 57" Rear Projection...

Not finding what you are looking for?
Toshiba 50HPX95 50 in. Plasma HDTV Logo

297 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74185 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...