Question about Onkyo TX-SR674 Receiver
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Could well be the quality of your cables. if you have high end cables the consult a service agent. if you have the cables that came with the products, go and get some better ones.
Posted on Dec 13, 2007
This might somewhat help. Today I went back .. I went HDMI out of the Cable box and DVD player into 2 of the TVs HDMI ins. The digital audio out from each, straight to the receiver and things are working ok. All speakers are working OK. Sound isnt as loud or crisp but unfortunately I found no other solution.
Posted on Jan 06, 2009
Well the next step would be to make sure that all the settings are set to subwoofer yes, and set your crossover as well. The amp usually has a crossover which tells the microprocessor which frequencys to send to the sub.
Posted on Jan 06, 2009
Unfortunately only the higher end Onkyo Reciever pass audio over HDMI for sound. 605,705,805,905 exc. Your reciever will carry Video over HDMI but you will need a digital optical cable for sound.
Posted on Jan 24, 2009
Goof information. Have you eliminated or proven the Onkyo as a cause by going direct to the projector? Try another Input and/or Output. It's best to know which component is broken and if it's limited to a specific subset of its function.
Settings are also indicated. Run through the video setup again. If it just stopped, what preceded it?
Posted on Nov 28, 2009
Tips for a great answer:
To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode. PLEASE UNDERSTAND THAT YOU WILL LOSE ALL YOUR AUDIO & VIDEO ASSIGNMENTS ON THE RECEIVER PLUS YOU WILL LOSE ALL YOUR SPEAKER CONFIGURATIONS, SPEAKER DISTANCE AND ALL LEVEL CALIBRATION SETTINGS. YOU WILL ALSO LOSE ANY PROGRAMMED RADIO STATIONS IN MEMORY. Once the receiver goes into standby mode turn it back on and go thru the setup menu for all custom settings., Thanks, JT
Feb 21, 2015 | Onkyo TX-SR674 Receiver
Jan 25, 2011 | Onkyo TX-SR605 Receiver
Nov 11, 2010 | Onkyo TX-SR674 Receiver
Apr 17, 2009 | Onkyo TX-SR705 Receiver
Jan 24, 2009 | Onkyo Audio Players & Recorders
Dec 29, 2008 | Onkyo TX-SR606 Receiver
Jul 10, 2017 | Onkyo TX-SR674 Receiver
Apr 25, 2017 | Onkyo TX-DS787 Receiver
Dec 10, 2011 | Onkyo TX-SR674 Receiver
124 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: