Question about Canon Rebel XT / EOS 350D Digital Camera

2 Answers

Help! I don't have the clear settings option on the menu screen

I want to restore the default settings on the camera and am unable to do so, as I don't have the option to "Clear Settings." Any help would be appreciated. Thank you very much.

Posted by on

  • motech44 Oct 10, 2008

    I have no clear settings function or

    custom functions
    sensor cleaning
    firmware

    ??????????


  • boulaudan Feb 07, 2009

    Same for me. My sensor is dirty and I need to celan it, but don't have the option in the Menu ...

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 155 Answers

You could restore all the settings by taking out both the main battery and the backup battery.

To clean the sensor, press menu, go to the second tools page (spanner and number 2), press down 5 times until Sensor Cleaning is highlighted and press Set.

Don't forget you'll need to remove the lens!

Posted on Feb 08, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I think you need to be in P Tv Av M or A-DEP to get those setting on the menu.

Posted on Feb 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to restore factory settings


To restore your camera settings to the factory default: Press the Menu button. Use the Multi-controller to navigate to the CameraSettings 4 tab. Use the Multi-controller or the Quick Control dial to highlight Clear All Camera Settings and then press Set.

Oct 04, 2015 | Canon PowerShot A410 Digital Camera

1 Answer

Camera Canon Power shot SD800 IS, LCD screen shows much speckling. Also in telphoto mode the pictures are grainy.


try restoring your camera to the default settings, in most cameras theres a option for this in the menu, or there may be a reset button to press to get it to reset everything back to factory defaults.

lets see how the things are after this

Sep 05, 2008 | Cameras

2 Answers

How do i reset my canon rebel t3i back to default settings


Go into the Menu, Go to the ninth Submenu folder, Sec one from the end, Then Go to clear settings, Third one down, Hit set, Then Clear all Camera Settings. TC Camera Repair.

Jul 08, 2014 | Canon EOS 600D Rebel T3i Digital Camera

1 Answer

I have a Lumix DMC-FZ30 which I bought in late 2006. my problem is the LCD screen has gone blank, ( all white). The eye-piece still works, but because of my eyesight it is difficult for me to read the...


Hello Frank! Welcome to FixYa!

If LCD screen has gone blank but eye piece still works best and as you told that you are unable to read the settings then just follow the given steps to reset the Camera
First of all, Turn on the camera. When the camera is turned ON, Press MENU button, Then Press right Key. Now you are here on Settings, Now move front dial to switch pages of settings to 3/4. Here you have to keep intention that you have to move front dial to three times because you have yo move to setting page of 3/4
12_13_2011_11_59_04_am.jpg

Now you are here on settings mode where first option as RESET, Now Press right key and the MENU key, It will rest the camera to default settings.

12_13_2011_12_02_31_pm.jpg
For more details, i am providing you the manual of Panasonic Lumix DMC-FZ30 Digital Camera,To download manual CLICK HERE
It will help you alot, You need Adobe Reader Software to open this manual, If you don't have download it then you can open this manual. It will provide you in all the operations of Panasonic Lumix DMC-FZ30 Digital Camera.
I hope you have clear picture in your mind. Don't hesitate to let me know if you have some confusion.
Sir, If you find my service helpful for you the your Rating as FIVE STARS and your Words of appreciation will be esteemed.


Thank you for taking my service and for using Fixya

Concerned: Muhammad Uzair

Dec 13, 2011 | Panasonic Lumix DMC-FZ30 Digital Camera

1 Answer

Sony Cyber Shot W330: My photos are blurry! I feel like I'm holding the camera steady. I've had the camera for 1 year. I am not sure what settings to use . . . ISO, VGA, easy mode, Flash on/off, ?...


Sorry about the focus problems... has the camera been dropped at all? Are you getting a lens error message? If not, then I suggest resetting everything to factory default and starting from there.

I don't have a W330 to look at, so I can only give you my best guess where to find the proper menu options. Go into the menu, then scroll through each screen till you find one that says "Setup" (I believe that Sony uses that name for the section we are looking for) and then you should see an option that says "Initialize". Select this to put all settings back to default, this may clear up the problem.

Now put the camera on the green "A" setting for the shooting mode, and the flash should be on "A" (with a lightning bolt) for automatic. I hope this helps!

Thomas Drayton
Owner, Darntoothysam.com Digital Camera Repair

Jul 25, 2011 | Cameras

1 Answer

I am having a sony cybershot s750, i have checked almost each and every setting but unable to click clear picture. On proper light condition clicked picture were having linings viewed as picture taken of...


You may have changed the light condition settings,white balance etc which will will create bad images when not used under the prescribed conditions.Since you are not aware which all settings you have changed, you can restore the settings of the camera to factory default values.This will allow you to use the camera under normal conditions.Please refer the instructions shown below to set the camera to default values.
tinualbinale_19.png
Please don't forget to rate me if satisfied with my solution.Thanks for choosing Fixya.

TinuAlbinAlex.

Jun 17, 2011 | Sony Cyber-shot DSC-S750 Digital Camera

1 Answer

I have sony DSC-W190,i want correct menu setting ,bcos if i take a picture its not clear,i think may be menu setting changed,idnt any idea about menu setting pls help.....


Hi,

If the Menu settings in the camera is changed, then I suggest you to reset the Camera back to factory default. Initializing the Camera back to factory default will set all the settings in the Camera back to factory default.
To initialize the Camera back to factory default, select the INITIALIZE Option from the Main Settings 1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.
You can also try a manual reset;

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.


The blurry image capturing can also adjusted by changing the ISO Settings or the Scene Selection modes.


Thanks for using FixYa!

Apr 07, 2011 | Sony Cyber-shot DSC-W190 Digital Camera

1 Answer

HOW DO I RESETT TO FACTORY SETTINGS, MY PICTURES ARE DIFFERENT SETTINGS ARE ALL MESSED UP, MAY BE THE KIDS HAVE PRESSED DIFFERENT BUTTONS HELP, i just want standard settings so i can set again to my liking


Somewhere in the menu there should be a setting that restores factory defaults. Scroll thru the menu items and look for default settings, I believe these are in the same menu that has your formatting options. I hope you have the manual so you can look thru and see what needs to be done. You might also take time to just scroll thru the menu's and see what options are available and maybe you can tell what has been changed or what the options for each menu item are so you can decide wheter you want that selection or make a change there. If you know af a good camera shop or retailer they may be able to help you with this , most places are willing to help if it means getting a new customer in their doors!

Nov 14, 2010 | Olympus E-420 Digital Camera

2 Answers

Looking to reset to original factory settings


On the camera's menu system, under Setup2, look for the option titled "Clear Settings". When selected, you can either clear just the Custom Settings, or you can clear all camera settings, which restores it to the factory defaults.

Jan 05, 2009 | Canon Rebel XT / EOS 350D Digital Camera

1 Answer

20D slr canon


In the menu, you can clear all the settings



Restoring the cameras defautlt settings

1 select clear settings
-press the menu button
turn the dial to select clear settings then press set

2 select clear all camera settings
-turn the dial to select clear all camera settings then press set

3. select ok then press set. the default settings will be restored.

Aug 20, 2008 | Cameras

Not finding what you are looking for?
Canon Rebel XT / EOS 350D Digital Camera Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

98829 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

164 Answers

old marine
old marine

Level 3 Expert

1573 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...