Question about Trendware TEW-432BRP Wireless Router (TEW432BRP)

1 Answer

How to solve it???

I have a trendnet TEW-432brp but the problem that this kind of router dont work on the network of my ISP (i didn't know they told me that after i bought it) and that is because of the service name i dont know what they mean, and when i put my service name nothing happen and still no connection. so what should i do?????????

thank u.

Posted by on

  • GEAG Aug 04, 2008

    hello ayamaya



    thank u for trying to help me.



    well i gaved my router to my ISP to see if he can fix it or put some setup , but he told me that the problem is in the service name and he can do nothing and the router will not work on his network ( the service name is Mnets/RES, host name : " 77.94.32.31.satgate.net " )

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 143 Answers

Your trendnet is just a router and it should work with any ISP whether if it's cable or dsl. you just need to connect it to the broadband modem provided by your ISP and configure with the correct settings.
with cable conncetion you just simply connect the ethernet(LAN) port of the modem to the internet(WAN) port of the router. then perform a power cycle by turning all the devices off. after that, turn on the modem first and wait for the lights to lit up before powering on the router and the computers. if this will not work you need to access the router's page and perform a mac address clone.
for dsl connection, you need to get the username and password of your internet account from your ISP then set your router to PPPoE or PPPoA.
you need to also check that your modem and your router has different ip addresses to make them connect to each other properly.

hope this'll help you but if you still have the same problem, just give me the exact model of your modem and who is your ISP

ciao!

Posted on Aug 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How properly to connect TRENDnet TEW-432BRP to laptop


To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Nov 26, 2010 | Trendware TRENDnet TEW-432BRP 54Mbps...

1 Answer

How do I change the channel on my TRENDnet TEW-432BRP router?


To change the channel, you need to loginto the router management page and click on the WLAN tab.

You can find the channel information under the WLAN tab. Change the channel ( channel 1 , 6 , 11 ) are the non overlapping channels and mostly prefered.

Oct 31, 2010 | Trendware TRENDnet TEW-432BRP 54Mbps...

1 Answer

Can't assess password to set up a new computer


Here is the PDF file that shows how to reset the router if the password is forgotten.

http://downloads.trendnet.com/TEW-432BRP/FAQ/FAQ_TEW-432BRP.pdf

Oct 14, 2010 | Trendware TRENDnet TEW-432BRP 54Mbps...

1 Answer

How to connect tew-432 brp to MT800 modem for a wireless connection


you can connect your Ethernet cable from tew-432brp to MT800.

if serial ethernet cable not work you can check with cross cable of ehetrnet also.

Mar 30, 2010 | Trendware TRENDnet TEW-432BRP 54Mbps...

1 Answer

Problem using Wa1003A and Tew 432 brp to share my internet


lan wires are the same. lan wires used to connect your computer to your modem can also be used to connect your Wa1003A adsl router and TEW 432 brp.

you just got some things mixed up.

1. you should set your Wa1003A adsl router to bridge mode. At this point, it will just be "pass through" device and will not be the one who will ask for IP adds from your ISP.

2. configure your TEW 432 brp with your pppoe username and password. Your TEW 432 brp will now ask the network for the IP address to that it can connect to your ISP.

3. leave your lan wires the same.


Apr 24, 2009 | Trendware TRENDnet TEW-432BRP 54Mbps...

1 Answer

TRENDnet TEW-432BRP router cannot obtain IP through DHCP


it seems that ur PC & cable modem configuration is ok, now the problem is with ur router WAN interface configuration. the problem would be one out of 2 - first to check whether ur router wan interface is configured properly to obtain IP address from DHCP (if possible, u can give the static ip address with same series as cable modem) second to check with ur ISP.

Mar 19, 2009 | Trendware TRENDnet TEW-432BRP 54Mbps...

1 Answer

Trendnet router


i found out that since i have an older version of winxp 2000, i need to get a network adapter, to get this router going.

Mar 25, 2008 | Trendware TEW-432BRP Wireless Router...

3 Answers

My TEW-432BRP doesn't work when loggin yahoo mail or microsoft update web!


what are the setting on the router and or pc and modem? Do you have any firewall or portforwarding turned on? Are you using DHCP?
Need more info...

Jan 13, 2008 | Trendware TEW-432BRP Wireless Router...

Not finding what you are looking for?
Trendware TEW-432BRP Wireless Router (TEW432BRP) Logo

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Trendware Routers Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

alex metro
alex metro

Level 3 Expert

329 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you a Trendware Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...