Question about Brother Sewing Machines

2 Answers

Exterior Bobbin winder does not turn or wind a bobin? Model CS-8072

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 26 Answers

You will probably find that the rubber ring that drives the bobbin winder has gone all gooey and will need replacing. You have to split the cases to do this and remove the circuit board screws to get at the screw that holds the winder in position..

Posted on Feb 06, 2015

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers

You will need to turn the speed to maxium then press the start button. I attached a site that has your manual and shows great pictures of how to wind a bobbin.

brother model CS-8072

Posted on Mar 16, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cs-8072 Red light


It's just a thought, but the red light will or should come on as soon as you push the bobbin winder in position to wind a bobbin. The red light should turn off when you push the bobbin winder back to the original position. I can't tell you how many times I have been dumbfounded after having done this. I hope this helps.
P ;)

Jun 03, 2014 | Brother CS-8072 Computerized Sewing...

1 Answer

Winding a bobin


That's how that machine works. You don't loosen the hand wheel or anything, Simply put the bobbin on the winder and go.

Mar 13, 2014 | Husqvarna Viking 1

1 Answer

How do I wind the bobbin on a Brother sewing machine Model CS-8072?


Go to brother.com and get a manual download for free, make a copy and you will learn all about your machine

Jul 20, 2010 | Brother CS-8072 Computerized Sewing...

2 Answers

Brother CS 8060 bobbin wont wind...but motor runs


no idea... did you lock thread onto bobbin so it holds to wind?

Jul 17, 2009 | Brother CS-8060 Computerized Sewing...

1 Answer

Threading bobbin on singer stylist 522


To wind a bobbin put the cotton reel on the top pin, take the thread to the left and round the little wheel and back to the bobbin that should be on the winder, wind the thread round a few times to take a grip, release the stop motion in the balance wheel, turn the winder button so the winder moves to the balance wheel and press on the foot control slowly.
When you put the bobbin in the bobbin case make sure it turns anti clockwise.

Jun 27, 2009 | Brother CS-8072 Computerized Sewing...

3 Answers

Toyota sewing machinge 5500


If I understand the problem, the bobin winder has probably lost a rubber 'o' ring.

Unscrew the two top screws and remove the top cover. At the base of the bobin spindle is a metal disk that should have a rubber 'o' ring on it. This will perish over time and break off.

When the bobin winder is pushed sideways into the active position, this should contact the main turning handle thingy (that's a technical term) and be spun around. Check if the bobin 'o' ring is making contact or if it is even there at all. Any sewing machine repair shop (or good automotive store if you're desperate) will have a replacement.

Oct 09, 2008 | Sewing Machines

2 Answers

Cannot wind the bobbin


Check to make sure that the bobbin is locked onto the winder. If is not locked on then nothing will move. I know I had this problem as well and found that the bobbin must be locked on the winder.

Aug 24, 2008 | Brother CS-8150 Computerized Sewing...

5 Answers

Can't wind the bobbin


Bobbin will not lock on bobbin spindle, what can I do?

Mar 20, 2008 | Brother CS-8150 Computerized Sewing...

4 Answers

Singer futura CE-200 Can not wind the bobbin thread


In embroidery mode, you have to send a design to the machine before the bobbin winder will work.

Jan 30, 2008 | Singer CE-200 Quantum Futura Computerized...

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...