Question about Kitchen Ranges
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: project on airline resrvation
these two links will help u get the important content for ur project
and let me know does this help u
Posted on Feb 23, 2009
Here are some templates to get you started, unless you have a house style as your template.
Posted on May 22, 2009
Unfortunately, you don't have enough information to go on to give you a definative answer.
The Sampson Aireline will plug onto ANY xlr type DYNAMIC mic and should work.
The one thing on the AMT Elite I found said it was a "condenser" type element which means it would NOT work with your Sampson setup. Condenser mics require a Phantom power arrangement to charge the element and operate the local FET input amplifier.
If you are trying to mic a violin, the Airline 77 that was for the dynamic mics is a very poor choice as it is low impedance. Most violin pickups use a Piezo pickup which requires VERY high impedance input amplifier.
For my wife's violin we use an Autolycus pickup and an X2 wireless sytem. The pickup comes from New Zeeland and the X2 is CD quality digital wireless link. You have to make your own connector at the violin for the X2 cable was intended for guitars.
Posted on Dec 25, 2009
If your printer print faintly, and your toners are not low, the problem lies with the imaging unit. What happens as the printer is used, a film of toner builds up on the developer/toner blades. This build up starts to block the toner that ultimately makes the image on the paper.
This can be fixed one of two ways. You can buy a new imaging unit for around $100+ but, eventually the film of toner will build up again and they you can buy another one. Or you can take your imaging unit apart and clean the developer blade(s) and you will be good to go. It will take about 20 to 40 minutes the first time you do it. I have instructions on how to do this in my Tips section.
Posted on Mar 05, 2010
You have not provided enough information for us to help you. What type of rifle? What do you mean by scaling?
With the scope on 3 power you should be able to sight it in at 25 meters. Going to a higher magnification may cause blurring at that distance.
You also may have mounting problems that are causing the scope to move around when you shoot. Your rifle may be fine.
Posted on Oct 14, 2010
Tips for a great answer:
Jul 25, 2017 | Computers & Internet
Jul 02, 2017 | Best Computers & Internet
Mar 21, 2017 | Cars & Trucks
Feb 24, 2017 | The Computers & Internet
Jul 11, 2016 | Computers & Internet
Apr 30, 2014 | Necchi Sewing Machines
Mar 07, 2010 | liftmaster Chamberlain Garage Door Opener...
Oct 12, 2009 | Hyundai Motor 2002 Sonata
35 people viewed this question
Usually answered in minutes!