Question about Hotpoint Ultima WF860 Front Load Washer

1 Answer

Loud banging on the spin - Hotpoint Ultima WF860 Front Load Washer

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,277 Answers

Hi from retired Englishman in SW France

It is necessary to ensure absolutely that the machine, even when empty, has all 4 feet very firmly on the floor, and I mean firmly ;-0)

Doesn't matter whether it is empty or not but switch it off then-
very firmly push one front corner diagonally into the centre of the machine and see if the machine moves or rocks AT ALL, even the slightest. If it does you will need the open-ended spanner which came with the (new) machine........which of course went missing a long time ago?!! An adjustable spanner will suffice.
Adjust the foot under that corner downwards until it is very firmly- almost pushing- against the floor but not so far that the corner lifts up!
If this corner did not rock do the same to the other.
Once you cannot rock the machine the slightest little bit, screw the locking nuts up tight to the underside of the machine so that they will not move. Ideally the rear feet should also be locked.

If this has not cured the problem it is possible that the internal drum suspension is malfunctioning.

Good luck,

John C

Posted on Mar 15, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore 43142 front loader bangs during spin cycle any ideas on what the problem might be?


always check the load to the drum is not to heavy on one side, this could cause it to bang.

Aug 25, 2012 | Kenmore Washing Machines

1 Answer

Frigidare front load washer has loud banging on spin cycle. After much work we reallized one shock was broken of which we repaced both now it still making the loud banging shaking motion. Also the washer...


Thanks for choosing FixYa and welcome. Since the suspension is ok and it is level, check your drive motor and spin bearing. Usually, these are the trouble parts when loud noises are associated with the spinning cycle. Your drive motor controls the spinning. Since the noise is during spinning, that is probably where your problem lies.

Apr 29, 2011 | Frigidaire GLTF1670A Front Load Washer

1 Answer

Loud banging noise during rinse


Most noises from a washing machine occur during the rinse or spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.This will solve your problem.

Apr 08, 2010 | Whirlpool GHW9100L Front Load Washer

1 Answer

FWT449GFS2 making loud banging noises during final spin cycle


lxr6232eqo making loud banging noises during final spin cycle

Aug 31, 2009 | Frigidaire Washing Machines

1 Answer

Kenmore washer loud bang in spin


Great!! Thanks for the followup -- I mean really, thanks!!

May 02, 2009 | Washing Machines

1 Answer

Loud banging noise when machine goes into spin mode. sounds like it is banging on the side. Please help !


Usually this is an out-of-balance condition caused by too much weight on one side of the tub, move the clothes around and try again.

Apr 26, 2009 | Washing Machines

1 Answer

Washer spin cycle extreme vibration and loud bang when it stops


check the vibration damper rods for breakage - especially the mounts.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Mar 17, 2009 | Kenmore Washing Machines

1 Answer

Makes a loud banging sound when spinning clothes


check springs and shock absorber.try to put more laundry.

Feb 16, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

Not finding what you are looking for?
Hotpoint Ultima WF860 Front Load Washer Logo

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

puggy666

Level 1 Expert

48 Answers

ptpumpman

Level 3 Expert

407 Answers

Cindy Wells

Level 3 Expert

5129 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...