Question about Gateway FPD2275W LCD Monitor

2 Answers

When it's turned on, the light on my monitor blinks but the screen doesn't display anything. Why might this be happening, and how can I fix it? Light blinks orange sometimes green but no display. At first it would blink on and off green on booting then come one when the on/off switch was pressed. I opened it up to look if too much dust or whatever, looked fine. Lots of circuit boards (3 at least). Blinks orange with just power on, hooked up no blink (VGA and digitial).

Posted by on

  • raskey kunate Nov 30, 2011

    my lcd moniter always blinks when it is on

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Checked, still under warranty (3 years) will send in.

Posted on Aug 02, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 66 Answers

If this is a lcd monitor here is the problem....
http://www.fixya.com/support/t859266-koss_kld2700_lcd_tv_no_picture
As in all lcd tv or monitor the backlight will soon go out and have to be replaced.
Hope this helped...
Kevin

Posted on Aug 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My monitor screen is black and the yellow standby light is blinking. I can not get the light to stop blinking or get the monitor to show anything, but a black screen. What can I do to coerrect the problem?


mcdevito75 here, Press the SHIFT key, a screen should come up telling you too click on your user name, left lower side of screen. If this doesn"t work, press the yellow blinking light on the monitor see if picture comes back, then follow the directions. If this doesn"t work, shut computer down with switch on the computer itself. Hope this helps.

Jul 17, 2010 | Acer Computer Monitors

1 Answer

No display on monitor when powered,Light is on.


change caps 1000mf-10v to 1000mf-25v in power supply and 470mf-10v to 470mf-25 or 16v.

May 12, 2010 | ViewSonic E50C 15" CRT Monitor

3 Answers

I CANT GET MY MONITOR TO TURN ON


It could be the Monitor, the VGA adapter, or the PC itself. If you power on the monitor without anything connected to it, do you ever see anything on the display?

If not, it is probably the Monitor. If yes, it is likely the vga adapter and/or PC.

Mar 18, 2009 | SVA-USA VR 17S 17" Flat Panel LCD Monitor

1 Answer

Monitor : no display and blue led light is blinking


The power supply is the first thing that the 110v electric line goes into. The invertor is the next item past the power supply, or sometimes contained within it. I do not thing monitors are a DIY repair.      First substitute a different monitor to confirm that it is, in deed , the monitor and not the video card.

Jan 14, 2009 | Advueu Technology ADV178T 17" Flat Panel...

2 Answers

When it's turned on, the light on my monitor blinks but the screen doesn't display anything. Why might this be happening, and how can I fix it? my new lcd monitor blinks on for 1 second then off but my...


Refresh rate may be set too high for LCD
hook up crt monitor
1. Open control panel-display
Click on settings tab and set to a lower screen res such as 800x600
Try lcd

2. Open control panel-display
Click on settings tab
click advanced button
click on monitor tab
set screen refresh rate to 60 hz
Try lcd

May 20, 2008 | Computer Monitors

1 Answer

When it's turned on, the light on my monitor blinks but the screen doesn't display anything. Why might this be happening, and how can I fix it? Monitor will go on for a split second, then screen will go...


they normally turn off like this when they aren't receiving a video signal from the pc (same as when you turn off the pc). make sure that it is connected properly, and that the video output is activated. try disconnecting from the other monitor while its on and connect the problem monitor...if it still isn't working then there may be a problem with the cable or the monitor itself. Try another VGA or DVI cable. Hope this helps

Mar 29, 2008 | Computer Monitors

1 Answer

The screen doesn't display


that means the computer is not getting signals from the cpu .. its because of cpu problem .. mainly dust inside hard disk connectors clena and refit memory and hard disk

Dec 02, 2007 | Samsung SyncMaster 793DF 17" CRT Monitor

1 Answer

HD19A / 19-Inch light flickers but no display


One of 2 possibilities come to mind. 

 

1,  The vga chord is loose on the back of the monitor.

2, Your resolution is set too high or low to be displayed.

 

The blinking light means that the monitor is either not getting or understanding a signal.

 

Hope this helps.

Oct 12, 2007 | Microsoft Likom HD19A 19" LCD Monitor

Not finding what you are looking for?
Gateway FPD2275W LCD Monitor Logo

1,137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Computer Monitors Experts

olayoju victor

Level 2 Expert

191 Answers

NIK
NIK

Level 2 Expert

206 Answers

David Payne
David Payne

Level 3 Expert

13437 Answers

Are you a Gateway Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...