Question about Philips BDL4231C LCD TV

1 Answer

I need 1 leg of a stand for a Philips BDL 4231 TV. One of our legs snapped when moving the tv and we don't want to wall mount it. \r\nThanks, AOM

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

Electronics stores do not stock extra stands for TVs. Each TV comes with one stand and that stand goes with the TV.

If you contact Philips directly you may be able to purchase a stand on it's own, but this isn't likely if your TV is over a few years old.

Check ebay and see if anything is available in your area, if not, you may be limited to purchasing a hybrid stand to mount on or wall mounting.

Posted on Mar 15, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 42 in. Vizio Galleria and need to remove table top stand so I can wall mount. How do I remove base stand?


1. Unplug all of the cables and cords from your GV42L FHDTV10A.
2. Place the GV42L FHDTV10A face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV.
3. Pull the stand cover off by squeezing the sides to release the retaining plastic tabs.
(This is probably the trickiest part to find this, just feel around and don't be too rough with the plastic)
4. Remove the four (4) screws (screw's specs: M4, 0.7 Pitch, 15mm long) so that the stand base can be removed.
5. Gently remove the stand base
6. Now, the GV42L FHDTV10A can fit securely to a mount (sold separately) by utilizing the mounting holes in the center of the back panel of the TV. Please make sure to read the instructions of your specific mount to properly hang the GV42L FHDTV10A

Mar 13, 2011 | Vizio Gallevia GV42LF 42 in. LCD...

1 Answer

Im having trouble removing the base stand, I'm trying to mount it on the wall. I removed the 4 screws on the bottom but cant get the metal legs off.


Generally the stand is screwed on from the back of the TV. there should be 4 screws that will come out all the way and allow for the stand to be removed

Mar 13, 2011 | Maxent MX-42HPM20 42 in. Plasma HDTV

1 Answer

I want to wall mount a FX2490HD and cannot remove the base I have remove the screw form the back but the base will not move


Hi, there are two screws underneath the legs of the stand and one other screw to hold the attachment that the legs connect to. If you have removed all three screws then try swiveling the legs.


1hungryghost_5.jpg
1hungryghost_4.jpg

Feb 12, 2011 | Samsung Televison & Video

1 Answer

Need to remove the bottom attached to tv to mount tv to wall


Hi,

Firstly, before you unscrew anything, lay the screen face down on a mat on a table/desk with the stand hanging off the edge of the table. This will ensure nothing moves without you wanting it to.

There's four screws to remove, two from each leg. Two of them are above where the mains plug goes in, and two above the computer display input socket. Stand should slide out once these have been removed.

Jan 05, 2011 | LG 42LC2D 42 in. LCD HDTV

1 Answer

Hi I need a new infrared sensor for my TV, I'm struggling to find the part number could you help


assuming it is an infra-red sensor with 3 legs, or 3 legs and 2 other legs as stands, you should be able to use any old 3 leg IR sensor.

If it s a 2 leg one, any other generic 2 leg IR recieve diode will do. With either type, you just need to get the device back in with the same leg configuration. it is usually marked on the circuit board

Jul 05, 2010 | Philips 42PFL5603D - 42 IN. LCD HDTV

1 Answer

I need thd legs for the tv


Did you ever find the legs/table stand for this TV? I'm looking for the same.

Nov 29, 2009 | Zenith P42W34P 42 in. EDTV-Ready Plasma...

1 Answer

Needing to wall mount a samsung 19in tv how is the leg part of the stand removed


It depends how the stand is attached to the TV, model number? Try downloading manual from www.tv.manualsonline.com

Nov 01, 2009 | Televison & Video

1 Answer

How do you take the stand off to mount it on the wall


on the back you will see either four or six phillips head screws that go through the set and into the legs. unscrew them all and the tv will separate from the legs.

if you have the manual, it will show you exactly where the screws are located

Sep 12, 2009 | Televison & Video

1 Answer

How do I remove the mount for the stand on a Viewsonic VPW450HD Plasma TV?


If you are using the stock leg's.

I have the same model, there are 4 knobs on the back of the unit that get inserted into the legs. BE CAREFUL... the unit is heavy, All you have to do is raise one end of the unit up about 1 1/2" and pull towards you a little. You may have to fudge with it a little until it comes out of the leg, but that should be all you need to do.

Apr 19, 2009 | ViewSonic VPW450HD 42 in. HD-Ready Plasma...

1 Answer

HELP PLEASE!!!!!


There are two handles on this set that come off with the removal of two screws. The base has posts that slide in up from the bottom. Trace the legs up and remove the two screws that hold each leg. You need a second person to help lift the set from the base. Now mount to the wall bracket.

Jan 20, 2008 | HP PL4245N 42 in. HD-Ready Plasma...

Not finding what you are looking for?
Philips BDL4231C LCD TV Logo

Related Topics:

339 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74496 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...