Question about ASUS 90-A4C1K1000 Keyboard

1 Answer

Some buttons dosent work at all,and some are like pushed-hold "rrrrrrrrrrr". it is a k52f i5 430m,aquired in juanary this year,i am writing using the virtual console.......any sugesrions pls?!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

It sounds like you may have dirt/dust/crumbs trapped under your keys. The keyboards on Asus notebooks seem particularly prone to this problem. Turn the computer off and then hold it, while open, so the keyboard is upside down, shake very gently, and tap lightly on the sides. This will help to dislodge any crud that has found its way under your keys. I use this particular solution on my own Asus notebook when I have keyboard problems. Additionally, you could purchase a canister of compressed air, one with the long straw nozzle attachment, and use that to dislodge and remove debris from under the keys.

Posted on Mar 15, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the network key


reset the Netgear to default settings by pushing and holding the reset button for 30 seconds or so, release. Reconfigure SSID and Security. You may want to write down the Key for future use. This may help: http://support.netgear.com/product/WGR614v1

Dec 27, 2012 | NetGear WGR614 Wireless Router

1 Answer

Asus K52F unable to connect to wifi


Try re-installing your wireless LAN driver or updating it on the internet.
Thank You.

Jun 25, 2012 | ASUS K52F Notebook

1 Answer

I have a problem to finalize cd after recording


On my CD recorder when it enters the finalize mode it first writes the PMA, after that mine gives a readout of the time it will take to finalize, after all that you need to hit the play button to write to the disk.

I don't have your exact unit but I supect you need to push an additional button to get it to start writing to the disc to complete the process.

Feb 27, 2012 | Tascam Cd-rw900sl Cd Recorder/player

1 Answer

How to change from metres to yards


Hold the back button down until it changes (meters to yards or vice versa). Momentarily push the back button to step through the modes (rain, reflectice, >150, no text=<150). To use turn on with front button, aquire target and hold down front button for 3 seconds

Jul 16, 2011 | Brunton Echo 440 Rangefinder

1 Answer

How do I remove the "write Protect " from my Olympus camera? I must have pushed some buttons incorrectly and suddenly it shows that "write Protect " sign. I already tried removing...


Find the flash memory card that plugs into your camera and stores the pictures. It's usually behind a door or flap on the side or bottom. Remove the card, usually accomplished by pushing it in and then it should spring outward slightly -- at least enough for you to pull it out the rest of the way. Check the card for a tiny sliding tab on the side and move it to the opposite end of its travel. See this wikipedia article for pictures and more info about write-protection.

Dec 17, 2010 | Olympus Cameras

1 Answer

Tried to reset the intermatic timer. But, the timer won't turn off


You posted under self-adjusting Intermatic, which I assume is ST01C
Add a comment if you have different timer.

I had the same problem resetting my ST01C because I was pushing reset button without holding down ON-OFF button.
But my timer is fairly new and hasn't malfunctioned.
A lot of folks write-in about ST01C that just doesn't work any more.

To reset timer: hold down ON-OFF button, and then use paper clip and push reset for full three seconds.
Release reset but keep holding ON-OFF.
Keep holding ON-OFF button until INIT shows on screen.
Release ON-OFF and wait for timer display to show.

If timer display doesn't restore, then change battery with new CR2.
People write in after changing battery and report timer never came back to life.
So these timers are hard to figure. ST01C has 1 year limited warranty.

To re-program timer for specific hours instead of dawn-dusk, there are clear steps on link below
http://waterheatertimer.org/ST01C-program.html

Nov 28, 2010 | Intermatic & Self-Adjusting Wall Switch...

1 Answer

My yamaha 1100 waverunner will not turn on . I have a ew battery in it, but no power. They have set out side for the past 4 years. What do I need to check?


u need to push mode and hold it it will display ---- push aaaa that is the factory start code for that year if that dosent work let me know and we will have to find out what code you need if aaaa works after u push the code it should say start

Jun 27, 2009 | Boating

Not finding what you are looking for?
Computers & Internet Logo

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David
David

Level 3 Expert

778 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...