Question about Foxconn M61PMV Motherboard

2 Answers

My Foxconn motherboard M61PMV suddenly stopped booting up. No beeps, no monitor but computer powers up. Before this everything was working fine and the computer was shut down normally. Please help me solve this problem. Thank you, DJ

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 961 Answers

Will your system come up in safe mode? Try a shutdown and unplug the tower. Plug the tower back in and see if it will come up in safe mode. If it does, go to "control panel", find "device manager" and right click on it. Find "display adaptors" and click on box at right(has a little + inside), it should drop down your device. right click o it and you sjhould see 'enable" or "disable". If it says enable click on that ad you should be good to go. Make sure your connections between tower and monitor are good.

Posted on Mar 15, 2011

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    Visited the website for 3 consecutive days.


    An expert whose answer got voted for 20 times.

  • Contributor
  • 22 Answers

Hello! Dear DJ,
Try to disconnect the VGA card and the Ram from your motherboard and start the pc tell hearing the VGA and Ram error then connect them again and start your PC.
second enter the motherboard setup and chose set as default.

Posted on Mar 15, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi i have a P4M800P7MA-ERS2H foxconn M/B that powers up but nothingelse -doesnt boot how can i tell if its a cpu or motherboard fault ty warren

Normally the only way to be sure is to use a CPU that you know works in another computer and test it in the motherboard that is not working. Also make sure that everything is connected to the motherboard properly and you can try disconnecting everything except CPU, RAM, video, and power to see if the computer boots like that.

Feb 17, 2012 | Foxconn 650M02-G-6L Motherboard

1 Answer

I want to reset my bios on a m61pmv foxconn motherboard. tried taking out the battery already but didn't seem to work

how long did you leave the cmos battery out for? if 15mns try leaving it out for 30mns
hope this helps you

Aug 15, 2011 | Foxconn M61PMV Motherboard

1 Answer

Just put a computer together with the Foxconn M61PMV board. It loads up with the Foxconn logo, all the parts are in the right places, and it works fine. However, I cannot input at all with a keyboard (USB...

I would assume you've tried different ports and different keyboards.
If you have, I'd contact the reseller and RMA the board.
There's really nothing you can do with a board that won't go into the setup.
Just for kicks, remove the CMOS battery on the board before you email/call the reseller.

Mar 16, 2011 | Foxconn M61PMV Motherboard

1 Answer

Will not boot up. no beeps no keyboard

does *********** board has power supply correct

Jul 02, 2010 | Foxconn M61PMV Motherboard

1 Answer

Installed Windows Xp on foxconn board M61PMV. My eethernet connection is not showing up

Have you checked in the BIOS if it's active/not disabled? If yes, have you installed its driver (along al the others)? If not , get them from

If yes, have you checked that in Device Manager the LAN connection is correctly recognized?

Jun 28, 2010 | Foxconn M61PMV Motherboard

2 Answers

When i open my pc i have this sounds like "toooooot" how can i resolve this? please help

Seems like memory problems. Try to re-seating the memory card(s) and clean them if necessary

Apr 13, 2010 | Foxconn WinFast K7S741MG Motherboard for...

1 Answer

Not booting up

try changing your memory or your processor. you might get a result

Jun 11, 2009 | EliteGroup ECS L4VXA2 (CDL4VXA2)...

1 Answer

No graphics on monitor whatsoever, screen completley blank

i think there is a problem with your system's hardware.. check whether your MOBO or your processor.. computers that doesn't startup and has no beep has defective or burned CPU or motherboard

Apr 18, 2009 | Foxconn 661FXME Motherboard

1 Answer

No Beep no screen

Sometimes a keyboard failure can cause this try a known good keyboard

Feb 19, 2008 | ASUS M2N32-SLI Deluxe/Wireless Edition ATX...

Not finding what you are looking for?
Foxconn M61PMV Motherboard Logo

356 people viewed this question

Ask a Question

Usually answered in minutes!

Top Foxconn Computers & Internet Experts

Alun Cox

Level 3 Expert

2678 Answers

Rommel Balcita

Level 3 Expert

749 Answers


Level 3 Expert

781 Answers

Are you a Foxconn Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides