Question about Elinchrom Cameras
a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to an Expert (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You hit exactly on the head with don't move the unit when plugged in - there are many people with the MS-1036 having this problem if you search the web. MSI does cover the bare-bone itself, however this falls into that damaged not defective area. Many shops would replace the entire board, making it costly as looks you had done once already. Good idea is to look to Asus 17" bare-bone and move your items over, much better made. Citrus Micro - see you worked with them, so have I, always had good luck with them, they make great contact and sometimes too honest, prices are great to - like any etail store with returns, manufacturer warranty tells most etail stores how they are to handle things. Could be why you see them getting rid of selling MSI products? Looks like you found the best idea, take to walk in repair shop - hard to beat that or again, buy new bare-bone.
Posted on Sep 07, 2007
If you do not already know where your problem is then Check for 12 volts DC (AC-off detect) at pin 3 of PC9A21, if missing replace PC9A21 part # 268P058020 on the Power PCB. LED does not blink at plug in. Check for 5-volts DC at connector RF pin 3 (system reset) if low or missing suspect the reset switch S7L20 part # 432P089010 on the Control PCB. LED stops blinking after 70 seconds of plug in but will not power on. This model is equipped with a keyboard lock feature; this can be mistaken as a no power condition. To unlock the keyboard press and hold the "menu" button on the front panel for 10 seconds . LED stops blinking after 70 seconds of plug in but will not power on. Check for 4.7 volts DC at connector RF pin 4 and 5 on the Signal PCB if low suspect problems with the switches/buttons on the Control PCB part # 935D587002 5. LED stops blinking after 70 seconds of plug in but will not power on. Keyboard is not locked and key inputs at connector RF pin 4 and 5 check good suspect the E2P PCB part # 935C978002 . Also if you can do a self diagnosis test by pressing the device and menu for 5 sec on panel of set and read the error codes.
Posted on Dec 10, 2007
Contact Canon Directly. They will have you send it in and they will look at it. if it is less than a year old and no signs of abuse they should fix it free of charge.
It will also be quicker working with them directly instead of trying to go through a repair center.
Posted on Jun 26, 2008
SOURCE: bad capacitors? ladywinn
If you take the back off the deflection board is the one on the left. You must remove the board and near the front you will see a capacitor with a puffy top. Replace this one and the three closest capacitors around it. Not easily done unless you have some experience.
Posted on Apr 09, 2009
Tips for a great answer:
Oct 28, 2015 | Onkyo TX-SR674S 7.1 Channel Up-Converting...
Jan 26, 2015 | Frigidaire FEX831CS Top Load Stacked...
Jun 30, 2014 | Elinchrom Digital Micro AS 3000 3000Ws...
Jan 19, 2014 | Admiral Washing Machines
Oct 04, 2012 | YouTube Videos
Sep 20, 2011 | Facebook Social Network
Aug 19, 2011 | Aiwa Audio Players & Recorders
Dec 05, 2008 | 2007 GMC Yukon XL Denali
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: