Question about MSI K9N6SGM-V (7309-020(K9N6SGM-V)) Motherboard

3 Answers

I don't know which wires to connect and to which slot it should be connected

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • MSI Master
  • 3,400 Answers

Posted on Feb 26, 2015

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 26 Answers

The most important cables only FIT one plug. If it fits in one but will not fit in ANY others. Thats probably where it goes.
If you need to know which wires for your case such as front usb slots try this pinout diagram
http://image.pinout.net/pinout_files/standard-usb-pinout.gif
Otherwise you will need to be more specific.

Posted on Mar 15, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I want to install daylight rolling lights, how should I wire it to fuse box?


rygO5JPM6h8HWAf9hLz0wbJIlzX6N"> If I am not wrong then this might be the picture of a nissan sentra se fuse box near the battery in engine bay.
Turn the ignition key off. Check a fuse slot with the help of a 12volt tester pen for continuity and find a slot which does not show any voltage. Now turn the ignition key on and check the same fuse slot. If it does show 12 volts on tester pen then its will be your connection point for your DRL's positive wire. Turn the ignition key off and tap your DRL's red wire (+ve wire) to this slot and connect your DRL's black wire (-ve wire) to your car's body. Thats it then....

Aug 31, 2014 | 2001 Nissan Sentra

1 Answer

Have a lose wire on a stihl 021 chainsaw by air filter but don,t know where it goes to


It probably goes to the ground on the choke lever. Remove the air filter and look at the area where the shut off switch is located, you should see a small slot where the wire slides in and connects with a metal piece in the stop position.

Apr 05, 2012 | Stihl Chain Saws, 017, 019, 021, 023 & 025

1 Answer

I don't know where to connect the sable cable from the hard drive to the motherboard.


I'm not sure what a Sable Cable is, but if you're talking about a cable that from the hard drive to the motherboard look real close with a flashlight and the slots are labeled on the board. Normally if that is the only hard drive it will go into Slot 1, or IDE 1 or SATA 1. Sometimes they start numbering them with zero and if that's the case put it in 0.

Apr 03, 2012 | Computers & Internet

1 Answer

My shredder jammed so I took the top off of unit in order to clean. When I pulled the top back it pulled all of the wires loose. Being inexperienced I should have made a "diagram" of where the...


Hello,
I'm afraid i cannot help you to tell you where each specific wire goes first because the wire colors mean nothing without sources and destinations but i can tell you this:Each wire has an elastic memory so that the shape it had before you opened it should remain the same. This means that you can deduce where each wire goes. Also you should have an electrician do the connections as there could be some voltage/amperage issues.

Jan 01, 2012 | Office Equipment & Supplies

1 Answer

Dtc 21 codes check light


This is a dtc for the main oxygen sensor, or MOS heater.

Some models don't have a heater on the sensor, indicated by a single wire connection. If the sensor has a heater, there is a 4 wire connection.

The fix is usually to replace the whole unit. It helps to have the exhaust hot when this is done, but take care. You might also need a long socket with a slot up the side of it.

Nov 12, 2011 | 1993 Toyota Camry V6

1 Answer

How to hook up a telephone. I need to know how to hook up a telephone from the box outside to the phone jack inside.


In order to do that you need to know on which pair does your phone jack inside your home is connected. In case you don't know or it is not connected then you need drop wire and punching tool to connect. Simply ask your service provider on which pair he has connected connect the drop wire on the same pair and extend it to your phone jack with drop wire.

Jun 30, 2011 | Lands Phones

2 Answers

I can't figure which wire goes where\w my Belkin Router. There's no manuel to show me how, or where to put the wires!


1.Please look on the rear end of the router you ll see 4 grey and one yellow slot
2.The ethernet slot from Your ISP Modem(Eg Motorola or westell)should be connected to yellow slot on the belkin and computer to one of the 4 grey slot
3.Run the Set Up CD :
4.Check for the light status : It should be green

Which means the router is all set and good to go

Jan 07, 2011 | Belkin Basic Wireless Router

2 Answers

Power supply connection for pioneer eq-6500


top left - orange.....goes to aux or memory wire
top right - blue.......goes to the remote wire used with amps
bottom left - black.......goes to the ground wire
bottom right - red........this goes to your hot wire

May 31, 2009 | Pioneer EQ-6500 9-Band Car Equalizer

1 Answer

Alpine TDA 7563 loses presets when vehicle is


You don´t connect correctly the wire for the constant power suply that´s why the memories don´t stand still,always be a yellow one you need to connect to a direct power suply,good luck

Mar 14, 2009 | Car Audio & Video

1 Answer

Dont know how to reinstall all the wires


You will have one RJ11 slot on the router with a Phone symbol
Connect your phone line to it

You will have a RJ45 slot ( a bigger phone cable slot) named ethernet
Connect your internet wires to it

You will have a Round slot to connect the Cable to it
Connect your cable to it

Feb 20, 2009 | 2wire 1800HG Router (RG1800HG00)

Not finding what you are looking for?
MSI K9N6SGM-V (7309-020(K9N6SGM-V)) Motherboard Logo

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top MSI Computers & Internet Experts

vsri9

Level 2 Expert

73 Answers

David
David

Level 3 Expert

781 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a MSI Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...