My synaptics touchpad V6.5 PS/2 port 3 does not work how to fix it pls help me tnx",

There's a tiny orange light near the upper left corner of the touchpad to the left of the touchpad. If that is lit, you may only have to tap the upper left hand corner of the touchpad a couple of times to get it to go out. and start the touchpad working.

Barring that, see if the synaptics driver is installed. Go to "Control Panel," change the "view" in the upper right hand corner to "large icons," and see if "Synaptics Touchpad V8.1" is listed.

If not, go to "Control Panel," locate device manager and click (with a usb mouse) "mice and other pointing devices," click "Synaptics PS/2 Port Touchpad," and check to see if it says, "device is working properly." If not or if it still doesn't work, click the driver tab, and click "update driver."

try to enroll to earler system settings windows - start - control panel - recovery, if not help, try to check touchpad connection

Try Fn F7.

http://www.synaptics.com/support/drivers
download at link above

For the full capabilities of the touchpad, you will need the Synaptics touchpad software and drivers. Look for your operating system here and download and install the Synaptics PS/2 Port TouchPad Driver under Keyboard and other input devices.

Reinstall synaptics touchpad driver

os? vista, 7, x64??? ok lets get to a base point. you had a different mouse, is it still installed? Is the dongle still plugged in? are the drivers loaded? uninstall drivers in control panel. remove all traces of every other mouse, pad, pointers, etc from your cq60. in device manager you should show Synaptics PS/2 Port TouchPad under MICE AND OTHER POINTING DEVICES. if after reboot the touchpad is still not working then right clock the Synaptics PS/2 Port TouchPad in the device manager and select uninstall. reboot. let me know when you get to that point.

At the top of your keyboard you will find some illuminated icons.
Find the one that looks like a finger on a touchpad and run
your finger over it. This activates or deactivates the touchpad.

Reinstall drivers.

Hi!
I resently had the same problem on my HP laptop and search Google for possible solutions. No solution works until I tried Windovs Update and then got 5 alternatives - Synaptics PS/2 port TouchPad was one of them. I update and restart and finally solve this problem.

Terje