Question about DISH Network IR Remote Control

1 Answer

My old Bell receiver 's remote was an IR Remote. How do I program the new UHF PRO Bell remote?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 358 Answers

Mikecrans175

I have provided the instructions on how to program your remote to your TV and addressing the remote to your receiver below. I hope this helps.

Remotes: Basic (Television Only)

  1. Turn the Television On.
  2. Press and Hold the TV Power button for three seconds until the LED flashes.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press OK. Note: The LED will flash three times.
  5. Test functionality with the TV.
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
Remote:
  1. Go to System Info screen.
  2. Hold down the SAT button until all mode lights light up.
  3. Enter a number between 1 and 15 using the numeric keypad on the remote.
  4. Press the pound (#) button.
  5. Once the SAT button blinks three times, press record. Note: If successful, the number selected in step 3 will appear in the System Info screen under Remote Address.
Ray Calo
DISH Network


.

Posted on Mar 15, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to program the UHF remote 153638 to link with the 106240. UHF/IR


you have to go to menu and look for the IR/UHF settings for the remote control and have it change to UHF, so that it would work for both remote!

Jan 24, 2014 | DISH Network IR Remote Control

1 Answer

Auto program dish remote 21.0 IR/UHF Pro to Epic Sound Receiver


DD Cox,

I can definitely provide more information. Without knowing the model of the sound system, I am unable to provide specific codes. Below I will include a link to lookup codes, as well as the steps to address the remote.

Link: http://www.mydish.com/support/apps/remotecodes.aspx

Addressing Remote to DVD:

1.) Press and hold the clear AUX button until all mode lights light up.
2.) Release and AUX light will be blinking.
3.) Press 2 and enter the code. (Example: If the code is 639, enter 2639)
4.) Press pound (#)
5.) Try functions (Power, Volume, etc..) and see if it is working.
6.) If no function, repeat steps 1-4 with another code.

Let me know if you have any other questions!

Tommy Faust
DISH Social Media Representative

Jan 22, 2013 | DISH Network IR Remote Control

1 Answer

Sanyo TV Code for Dish remote 21.0 IR/UHF PRO only operates TV Power and Volume Functions.


Hello Witt Thomas,

I can understand the concern and wanting the remote to work the TV Menus. It is possible with our remotes, however it depends on the TV itself. I've seen instances where there are 2 TV's in one house, and 1 will do it, while the other won't.

If you have tried all of the remote codes, and none work, the only other options we have available are to try a powr scan, or teach the remote. This link http://www.mydish.com/support/teach-learning-remote-20-21 can provide the steps on how to teach that model of remote control!

Let me know if you have any other questions.

Tommy Faust
DISH Social Media Representative

Jan 16, 2013 | DISH Network ES161256 21.0 IR / UHF Pro...

1 Answer

I need a code for a Prima Q328 Television


It may not be possible as that remote has a limited number of codes and even if it programs may only do a few things.

Try all the possible codes and look to see if that remote has a search feature which would allow you to try each and every code it has.

Nov 07, 2012 | Televison & Video

1 Answer

I want to program my uhf receiver/ir emitter 106240


Oh boy. here is the problem. i have also a 106240 IR/UHF receiver/transmitter that changes the channels in the satellite box from another room so i can watch them in a second tv at channel 4. the original remote for the 106240 is broken and i bought another UHF remote #153638. So i need to program the new remote to work and link with the 106240 receiver, NOT the satellite box or the tv. Is there any expert here to enlighten us how can be done ? Very simple question :how to program the remote 153638 to link with the 106240. Thank you in advance

Oct 13, 2012 | Tivo Televison & Video

1 Answer

HOW CAN i RESET SAT CODE FOR DIH REMOTE CONTROL FOR DIFFERENT DISH BOX


nmg55

Not all remote are compatible with all our receivers. Depending on the receiver and remote model numbers, if they are compatible you can readdress the remote to the receiver. I have provided a link for readdressing the remote to the receiver. I hope this helps.

Instructions on how to readdress the remote to the receiver:
http://www.dishnetwork.com/SupportSection/remote-setup
Remotes and receivers models:





222 -
21.0 IR / UHF Pro


222k - 21.0 IR / UHF Pro


301 -
3.4 IR


311 -
3.4 IR


322 -
4.4 IR / UHF Pro


381 -
6.4 IR / UHF Pro


411 -
20.0 IR


501 -
6.4 IR / UHF Pro


508 -
6.4 IR / UHF Pro


510 -
6.4 IR / UHF Pro


512 -
6.4 IR / UHF Pro


522 -
6.4 IR / UHF Pro


612 -
21.0 IR / UHF Pro


622 -
21.0 IR / UHF Pro


625 -
6.4 IR / UHF Pro


722 -
21.0 IR / UHF Pro


722k - 21.0 IR / UHF Pro







Ray Calo
DISH Network

































Nov 06, 2010 | DISH Network IR Remote Control

1 Answer

Remote lights up as if it is going to work however it won't do anything batteries are new, so that is not an issue almost seems like it needs to be re programmed or something my 2 year old could have...


Without knowing the exact issue I can only provide general information. Since it seems like it may be a satellite address problem, I can definitely help with readdressing the remote.

To program remote to Receiver:
1. Access System Information from main receiver.
2. Note the number on the bottom by Primary Remote Address/Secondary Remote Address.
3. Hold SAT until all lights turn on on top of the remote.
4. Enter a number between 1-15 and press #.
5. Press record 3 times after it finishes blinking and the number by remote address should change.

Tommy Faust
DISH Network

Aug 31, 2010 | DISH Network IR Remote Control

1 Answer

Bought a dish identical remote to Bell Expressvu.


You may need to program to your equipment, go to dishnetwork.com/tech and that will show you how to address your remote.

Nov 06, 2009 | DISH Network IR Remote Control

1 Answer

My IR remote no longer works in another room


Dawn,
If you want a remote that works via IR to control the satellite receiver you will need a IR only. The IR/UHF type only transmits signals to the receiver by UHF and the IR portion only operates the peripherals in the room such as the TV and VCR. There are some remotes that come with a kit that can change the remote to work as an IR only. I believe you have a TV2 remote and want it to work further away from the receiver particularly the room the TV is in. If this is the case you may have have to change the remote address of the new remote to match that of the old. You can do this by taking the number one remote and pressing menu-menu. Now take the new remote and press and hold the SAT button in the upper left of the remote until all lights across the top light up. Now key in the two digit number on the tv screen at remote address for tv2. Then press the pound sign and the SAT button will flash three times then press the record button and the TV2 icon should flash. Now you can cancell out of the screen on tv one and try the remote at the TV2 location. I believe this will fix your issue if not let me know. Thanks for using Fix Ya.

Jan 14, 2009 | DISH Network IR Remote Control

1 Answer

Uhf pro 8.0


Problem has been resolved per customer.

Sep 21, 2008 | DISH Network IR Remote Control

Not finding what you are looking for?
DISH Network IR Remote Control Logo

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

brian soufane

Level 3 Expert

693 Answers

john milligan

Level 3 Expert

514 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...