Question about Mitsubishi Televison & Video

1 Answer

Hello-i have mits DLP WD-65732 and the top 10inches has wavy pic

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 11,800 Answers

The diagnostic depend entirely on the way the image looks:
- if the waves are stationary - the image distorts in the same way in the same space - then the defect is in the optical engine: the plastic lenses from inside it have been deformed by the heat of the bulb .This series of tv's are well known for airflow problems and overheatings so almost surely this is the case in yours. This is unfixable, the entire engine will have to be replaced at an extremely high cost - over $1200. It will be cheaper in the end just to buy a new tv.
- if the entire image is unstable at the top of the screen then the image processor is no longer capable of correctly render the image. To fix that you will have to replace the mainboard at a cost of about $150. Unfortunately all the sites i know are out of stock so finding one will be difficult.

Posted on Mar 14, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My TV will not turn on. I just replaced the tv lamp 2 weeks ago. Help!!


did you use original Mits Lamp or a generic?? most mits DLP tvs wont run long or at all with generic lamps

Sep 30, 2012 | Mitsubishi WD-60C9 60" DLP HDTV

1 Answer

Wavy lines all over the screen on a 55 in. Mitsubishi DLP 2005 Tv that has intermitent wavy lines around all the edges of the people and edges of the screen. Jerky picture and almost makes you sic...


You probably have a V26 chassis. The only fix to this problem now that parts are no longer available from MITS is to call their Consumer relations dept. at 800-332-2119. If you have a qualified tech come out and estimate the job, Mits will offer you an attractive discount on a new model. To repair your problem would be around $750

Bill W
integrityhomeworx.com

Mar 22, 2011 | Mitsubishi Televison & Video

1 Answer

WD-65732 has audio but no picture. Sound like


Replace Lamp Call Mats Electronics 1-800-628-1118

Mar 25, 2010 | Mitsubishi WD-65732 65" Projection HDTV

1 Answer

I have a wd-65732 dlp mits projection tv its a 2007 yr ive had to put 3 lamps in it and 2 other friend have the same tv and same problem whats up?????


MOST LAMPS IN THESE SETS LAST APPROXIMATELY A YEAR TO A YEAR AND A HALF MAYBE YOU SHOULD CALL MITSUBISHI AND TELL THEM ABOUT YOUR PROBLEM.

Aug 09, 2009 | Televison & Video

1 Answer

Powers off and the lamp light goes red


The lamp will sometimes not turn dark before they start to go out. The life on these lamps are usually a year to a year and a half but, depending on when you purchased it in 2008 it may still be in warranty the lamp has 1 year on it.

Jul 28, 2009 | Mitsubishi WD-65732 65" Projection HDTV

1 Answer

Mitsubishi DLP wd-52725 wavy lines from top left to bottom right


the DM board is going bad and needs to be rebuilt. check out www.tv-techs.com

Jan 02, 2009 | Mitsubishi WD-52725 52". Rear Projection...

1 Answer

WD62825 Mits DLP ~ Lines in picture


the DM board and the FMT board need to be repaired. it is not the 4 caps. it will cost about $250.00 plus shipping. go to
www.tv-techs.com

Nov 21, 2008 | Mitsubishi WD-52525 52" Rear Projection...

4 Answers

Convergence Problem?


Convergence problems are what you have possibly a pincushion error. Either way if you have to have a repair shop do the repair, you should look at replacing the old TV.

Jan 26, 2007 | Mitsubishi VS-5043 50" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1210 Answers

The Knight
The Knight

Level 3 Expert

74185 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...