Question about Sabrent SBT-SRD4 (SBT-SRD4) Serial ATA Controller

1 Answer

Hi Im running an old Abit Kt7-A mother board with an on board Hi Point 470 raid, I have installed a new 2 Tb drive with a Sil 3114 ad in card, now the Sabreent 3114 is trying to boot from the new disk, my OS is loaded on the Raid array, running of of the Hi point controller, I have the Boise set for first boot device as ATA 100 Raid, what can I do to make the 3114 a slave controller. Thank you

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 902 Answers

I dont believe the 3114 will support a 2tb drive. i think i read the max was 1.5tb if not i would try a different raid array.

Posted on Mar 14, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Maximum hard drive capacity for vgc-rc110g


caviar black 7200 rpm scorpio 1tb good hd.western digital.

Jun 05, 2012 | Sony VAIO RC110G (VGC-RC110G) PC Desktop

1 Answer

Hi, I'm having K8V-MX Asus mother board with AMD 3000+ processor wih 1GB DDR ram, with 80 GB PATA Segate HDD connected. After adding 500GB SATA HDD to this mother board, my system performance is very low....


Hi,
Thanks for the details. I have used K8V-MX Asus motherboard and found it very reliable with quite reasonable performance. It definately supports 500 GB Sata drive and there must not be any issues after increasing just the storage. However, Operating System upgrade may result in sluggish performance. Drivers dont seem to be an issue to me either.
I suggest to review a few points detailed as under: -
- K8V-MX Asus Supports RAID, so, check for any RAID Drivers/ settings. (You dont have to use RAID for two Hard Drives of different make, capacity and speed). Try using one disk at a time having same Operating System (e.g. Windows XP) and compare the performance.
- Infact SATA Drives have better data transfer rate than IDE, which results in enhanced performance.
- Some Programs (that you may not be using with 80GB drive) Like antivirus may result in decreased performance.
- Please Review you Operating System environment and software installed. Make sure that the new drive & Operating System are free of any virus, which results in CPU Utilization upto 100%.
- Also, motherboard supports Max 2GB RAM, so you may consider adding more RAM.

Let me know if any further clarification/ assistance is required.
Hope it helps! Good Luck!
CreativeTECH

Jan 27, 2011 | ASUS K8V-MX Motherboard

1 Answer

I have an abit kd7 raid mother board and just installed 3 1g sticks of pc3200 400mhz and the bios only reads up to 266 any help


Is the board rated for the faster speed? Just putting in faster chips will not work unless the motherboard supports that speed.

Mar 26, 2010 | Abit KD7-RAID Motherboard

1 Answer

I have an old KT7 MOBO not sure if it's kt7a or just kt7


it may be the ram. download and run memtest86 at boot, before windows opens.

Mar 29, 2009 | Abit KT7A Motherboard

2 Answers

Unable to see RAID 5 config on Asus kfn32-D SLI/SAS MB


NVIDIA RAID does not support > 2TB (18xxGB) arrays. It will NOT show up properly in Windows.

Feb 20, 2009 | ASUS KFN32-D SLI /SAS Motherboard

2 Answers

New Hard drive xp install


If your hard drive is SATA and your windows disk does not have SATA drivers on it it will not find the hard drive this is your problem
http://driverpacks.net/DriverPacks/
Go to the above site and download "driverpack mass storage" and slipstream into your windows CD.
I have done this with one windows install disk that could not find disk then it worked perfectly

Nov 05, 2008 | Abit KT7-RAID Motherboard

1 Answer

Version number?


Bios 7N is for the following
  1. Support up to 137GB HDD and above.
  2. HPT 370 RAID BIOS version 1.11.0402. The RAID function is for KT7-RAID / KT7A-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
Version A9 is the last update
  1. Fix nVidia GeForce4 Ti 4x00 AGP card compatible issue with Windows XP.
  2. HPT 37x BIOS version 1.11.0402.The RAID function is for KT7A-RAID only. This BIOS version is also for non-RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
  3. BIOS Compile Date: 7/11/2002.
LINK
The above link is for the KT7a with Raid, however the standard KT7a also lists the same bios updates, the KT7a Raid ver1 lists different bios that won't be compatible with your board.

Apr 12, 2008 | Abit KT7A Motherboard

Not finding what you are looking for?
Sabrent SBT-SRD4 (SBT-SRD4) Serial ATA Controller Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sabrent Computers & Internet Experts

isaac johny
isaac johny

Level 3 Expert

796 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

386 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you a Sabrent Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...