Question about Brother LS-2125 Mechanical Sewing Machine

1 Answer

Sews good on top but balls up on bottom. - Brother LS-2125 Mechanical Sewing Machine

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,510 Answers

Check that the thread is tight around the bobbin. Make sure that the bobbin is in the right way around - the bobbin thread should double back on itself coming out of the bobbin holder. The bobbin tension adjustment is the small screw in the plate on the bobbin case that the thread passes under as it comes off the bobbin and goes out.

Posted on Mar 14, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Top tension thread shows little balls of thread bottom thread is good what can be done


The upper tension is too tight. The upper thread is pulling the bobbin thread up.

...

Jan 02, 2017 | Sewing Machines

1 Answer

I can sew a few stitches did it all balls up at


Thread balling up in the bobbin case usually indicates that the TOP thread is mis-threaded (usually at the take up lever). Check with your manual for proper threading path.

Sep 02, 2014 | Sewing Machines

1 Answer

Why does my thread ball up on the bottom side of my material when I try to sew?


Usually when your bottom thread is messed up, it is because your top thread is not threaded correctly.

Jun 27, 2014 | Brother XL-5500 Mechanical Sewing Machine

1 Answer

I have a singer model 2200 inspo\iration sewing machine. The top stich sews perfect, but the bottom stich balls up.


Totally rethread your machine, then check your needle, put in new one if you haven't changed it in awhile or not sure if it is bent. Usually it is in the top threading for problems underneath. Also, make sure that you are using the same weight of thread top and bottom or else you can have problems. Good luck

Sep 26, 2010 | Sewing Machines

1 Answer

Does anyone else have massive problems with tension on this machine too? The bobbin always balls up and the top is loopy and loose..I just want to sew!!


This problem can be from a couple of things, 1st you may not have it threaded right on top or bottom. 2nd the timing could be off

Aug 14, 2010 | Singer 3116 Simple

1 Answer

The top thread is so tight I can't pull it thru and the thread balls up on the bottom. I have tried adjusting it and can't get any thing solved.


If the thread balls up on the bottom of the fabric, USUALLY the upper tension is insufficient.

ALSO check for the correct threading both above and below and verify the needle is oriented correctely with the long groove toward you.

Jan 09, 2010 | White Sewing Sewing Machines

1 Answer

Upper thread balls up on the bottom. Makes a matt on the underside of garment.


If your thread messes up on the bottom then the problem lie in the top threadinbg of the machine.. Some how it is not thru the tension wheel like it needs to be. FYI.. Loops on the bottom fix the top.. Loops on the top, fix the bobbin.

Apr 19, 2009 | Singer Sewing Machines

1 Answer

Im pretty sure i have my singer 5525 threaded right but i think the bobbin is wrong but when i try to sew the top looks fine but the bottom is a thread mess an the thread keeps breaking


angle the bottom might be a mess but it is the top thread that
you see balled up .Pull the top thread and make sure there is tension on it ,if not check the thread is between the discs and there is nothing else between them .if this is ok there is something stopping the top thread from being pulled back up
through the needle plate to form a good stitch,if you can turn by hand and watch where it is catching you might be able to solve it.

Aug 17, 2008 | Singer 7462 Mechanical Sewing Machine

1 Answer

Singer sewing machine model 6012 c


hi
i want to know how i put thread in the sewing machine



thank you

Dec 15, 2007 | Sewing Machines

Not finding what you are looking for?
Brother LS-2125 Mechanical Sewing Machine Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1128 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...