Question about Airnet AWR014G8 Wireless Router

1 Answer

Laptop is requesting security key. I have lost my manual

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Airnet Master
  • 7,733 Answers

In order to get your router back to the original settings, you must push in the reset button (usually on the back of the router) for somewhere between 10 and 30 seconds depending on the router. You may need a pin or something small to push in the button, because it can be recessed. Once you have reset the router, the username and password will be changed to the defaults, admin and password, respectively. One thing you must remember is that resetting the router will change all of the router settings back to the factory settings. This means you will lose all of the changes you made since you got the router. Make sure to write down any things you've changed, so you can change them back after the reset. Also, I recommend updating to the latest firmware after the reset.

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

Posted on Mar 14, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost network when replacing wifi router


To connect your computer to a wireless router, you click the Refresh network list, then Choose your wireless network and then click Connect to your secured Wireless Network, it will asks for a Network Key before allowing you to connect into your wireless network. This Network Key is either the WEP, or WPA or WPA2 Encryption key that is used to configure the Wireless Router. The Passphrase is an alternate way to setup the Encryption key.
When you are requested for a Network Key, you can just enter the Passphrase that was used to configure the Encryption key in the wireless router. http://www.fixya.com/support/r5270415-network_password_network_address For information on securing your wireless network, configuring the wireless router and configuring the wireless card in the laptop/computer, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Aug 17, 2012 | Computers & Internet

1 Answer

What are the manual setting for wireless


To connectyour computer to a wireless router, you click the Refresh networklist, then Choose your wireless network and then click Connectto your secured Wireless Network, it will asks for a Network Keybefore allowing you to connect into your wireless network. This NetworkKey is either the WEP, or WPA or WPA2 Encryption key that is used toconfigure the Wireless Router. The Passphrase is an alternate way tosetup the Encryption key.
When you are requested for a Network Key, you can just enter the Passphrasethat was used to configure the Encryption key in the wireless router.http://www.fixya.com/support/r5270415-network_password_network_addressFor information on securing your wireless network,configuring the wireless router and configuring the wireless card in thelaptop/computer, please click on this link and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Apr 15, 2012 | HP Computers & Internet

1 Answer

Requesting network security code


When youclick Refresh network list, then Choose yourwireless network and then click Connect to your secured WirelessNetwork, it will asks for a Network Key before allowing you to connectinto your wireless network. This Network Key is either the WEP, orWPA or WPA2 Encryption key that is used to configure the Wireless Router. The Passphraseis an alternate way to setup the Encryption key.
When you are requested for a Network Key, you can just enter the Passphrasethat was used to configure the Encryption key in the wireless router.
For information on securing your wireless network, configuringthe wireless router and configuring the wireless card in the laptop/computer,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jun 16, 2011 | Computers & Internet

1 Answer

I have a desktop & a laptop with the Linksys router connecting the two. Everything is hooked up okay, but lost the security key on my laptop . Tried to set up my E Reader wireless & went into my...


Can you connect directly to your router using an ethernet cable?

Go into your settings on the router and choose a security key.

Set the same key for your laptops etc..

Dec 30, 2010 | Linksys WRT160N Wireless Router

2 Answers

Brought a new laptop with wireless installed have a philips SNB5600 but have lost the security key how can i get the code


go to the wireless access point admin settings (not on your wireless adapter on your laptop). then check wireless security settings. if you see something there such as security key, that is the security key that you need to set up on your laptop. if security key is not visible, try to see if there is an option there which says unmask to show the security key, then copy it to your laptop. if all else fails, change the security key in the wireless access point and change all the wireless adapters that connect to it accordingly to the new security key you set it up.

Nov 07, 2009 | Computers & Internet

1 Answer

Lost cd code


Common Kenwood Security Codes
Many Kenwood radios are configured with the same security codes:

KCAR - This seems to be a "backdoor" to some Kenwood models.
3051 - This is the security code which is printed in the manual of many Kenwood models.
1234 - This is a security code commonly chosen by Kenwood owners.
Entering Your Kenwood Security Code
If the car battery fails or is disconnected, the Kenwood will ask for the security code.

The procedure to enter your security code differs on various models of Kenwood car stereos. Here are three of the more common procedures:

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds until the "..." display disappears.
Enter the security code using your Kenwood remote.
Type 2
Press the "Auto" button and "Track up" on the face of radio at the same time until the four dash lines disappear.
Enter the security code using your Kenwood remote.
Type 3: Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset keys until the display shows the letter 'C'.
Enter the security code using your Kenwood remote.
Entering Letters on your Kenwood Remote
To enter a letter using your Kenwood remote, press a button once for the first letter, twice for the second letter, and three times for the third letter -- then press the Track Up or Next Track key to send the letter.

To send the letter 'A', press the 2 key once and then press the Track Up key. To send the letter 'B', press the 2 key twice and then press the Track up key.

Finally, when you are done entering all of the letters, press and hold the Track Up button for 3 seconds.

The key sequence to enter the security code KCAR is:

5
5
Track Up
2
2
2
Track Up
2
Track Up
7
7
Track Up
Your Kenwood should then enter tuner mode.

A Security Code Bug in some Kenwoods
There is a reported bug in the security code handling of some Kenwood stereos. In models with thie bug, the security code is stored incorrectly. The workaround is to enter the wrong security code.

In models with this bug, you have to decrement the third character of the security code by one. If your security code was 1111, you would enter your security code as 1101. If your security code was 9999, you would enter 9989.

Jun 16, 2009 | Kenwood KDC-W707 CD Player

2 Answers

I lost my network security key, router is not working.


Get the user manual to verify how to make a master reset on your router. There should be a small button inside a very little hole, on the back, that you should press with a pen.

Mar 27, 2009 | Belkin (F5D72304F5D7000) Router

1 Answer

Lost key for my other pc's


Hi,

To access your router configuration page, type the router’s IP address into a web browser.

I think this is 192.168.2.1 for the Belkin model. Note there is no ‘www’.

(If this does not work, and you’re using Windows, go to Start > (Run) and type cmd in the box. Click OK, to pull up a command line window. Type ipconfig into the window, and press return. In the output that appears, the Default Gateway shows the router address.)

You should then see a screen requesting a password. If you have not changed this, press return, because the default is blank (no password).

When you have logged in, go to 'Security' under the 'Wireless' menu. You should see your passkey there.

Hope this helps. Please come back to Fixya if it doesn’t work or you need further help.

If you want to download a manual, there are some on the UK site
here:

Good luck...:)

Dec 23, 2008 | Gateway Belkin 54g Wireless DSL/Cable...

2 Answers

Ive lost the code to unlock my stereo can u help?


3. Simple way to clear the security code (K type only)
1) During code request mode, press the Track UP key for at
least 3 seconds while holding down the AUTO key. (– – – –
will disappear)
2) Enter, “KCAR” with the remote controller as described below.
• Press the remote controller 5 key twice, and press the
Track Up key. (Enters a “K” )
• Press the remote controller 2 key three times, and press
the Track Up key. (Enters a “C” )
• Press the remote controller 2 key once, and press the
Track Up key. (Enters an “A” )
• Press the remote controller 7 key twice, and press the
Track Up key. (Enters an “R” )
3) Security function is canceled and unit sets to All-Off mode.
4) Code request mode appears if a mistake was made in entering
the numbers.

This is the only way to clear the code, please give me a "fixya" if it helps

Jun 15, 2008 | Kenwood KDC-M7024 CD Player

Not finding what you are looking for?
Airnet AWR014G8 Wireless Router Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Airnet Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Lawrence Oravetz

Level 3 Expert

9587 Answers

Are you an Airnet Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...