Question about Craftsman 10" Table Saw

1 Answer

I plugged in my table saw and everything worked just fine. I unplugged it, and then came back a few minutes later and turned on the table saw again. This time the motor was not running. Power was getting to the motor, but the motor was not turning. Could you help me out in this regard? This is a Craftsman 10" Table Saw. Thank you.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

First of all, how did you determine that power was getting to the motor? If you can test for power with a voltmeter at the motor connections themselves and show power then the switch is OK and the circuit breaker is not tripped. Turn off power and attempt to turn the blade " CAREFULLY" and if it moves easily then the motor is probably defective and will have to be replaced. After turning the motor and finding it easy to turn, then turn the power back on and try to start the saw again. Be carefull because the saw may start. If the blade will not turn then the motor is definitely defective and will have to be replaced.

Good Luck!

Posted on Mar 20, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Older model SI16Wa sliding table saw. Turns off after a few minutes running.


sounds like this has a thermal switch that might be faulty. What is the brand and I will try and find a breakdown, Let me know.

Mar 09, 2012 | Saws

1 Answer

I have a Frigidaire FMV156DBA built-in over-the-counter microwave that started behaving erratically tonight. The light started blinking on and off, accompanied by a repeated beeping. I unplugged the unit...


Yes have it serviced. Sounds like there is a loose/corroded connection inside and loose connections can cause fires. The intermittent/ramdom operation is indicative of this.

Apr 08, 2011 | Frigidaire Over-the-Range Microwave

1 Answer

I own a 10" craftsman tablesaw (model #


Wait for the motor to cool then try again..... you may use compress air to blow across the motor to speed the process.

Jan 19, 2011 | Craftsman 10" Table Saw

1 Answer

Seagate 1.5TB dropped from office table... TWICE.


the drive is damadged internally, you have to phone or email a data recovery centre to get your data back, that can cost $1500+ because of the size of the disk.

Oct 03, 2009 | Seagate FreeAgent Pro Desktop - 320GB -...

1 Answer

GE fridge and freezer cools when it wants to - freezer on top


hard to say, there is many questions left that need answered...does the compressor run, does the fans run? what more could you tell me.... whirlpoolpartssurplus.com free tech support

Jun 23, 2009 | GE (PSS26MSRSS) Side by Side Refrigerator

5 Answers

Power Outage & Now Wii Won't Power Up...


When this same thing happened to me, I unplugged the Wii power supply from the wall (not just from the back of the Wii) and let it sit unplugged for about 10 minutes. When I plugged it back in, everything was fine.

Nov 11, 2008 | Nintendo Wii Console

1 Answer

My table saw will turn on, but sounds very loud


Possibly bearing wear, or the blade rubbing against the guard/housing. Unplug the saw and spin the blade slowly by hand, if it feels notchy then I would suggest bearing wear. if it only seems to feel notchy in places then it could also be damaged gears.

Oct 24, 2008 | Saws

1 Answer

T.V. TURNING OFF AFTER ABOUT 5 MINUTES.


Go to Samsung.com for solution. There is a switch that just needs to be repositioned behind access door on rear. Fixed my HL-S5086W ok.

Feb 13, 2008 | Samsung HL-S5086W 50" HDTV

1 Answer

POWER WON'T COME ON


try unpluging and plugging back in

Jan 15, 2008 | Memorex MVD2042 DVD Player

1 Answer

XG-C50 Problem


Hello

Replace the fly-eye lens of projector.

Viren

Nov 09, 2006 | Sharp (BQCXGC50X1) Projector Lamp for...

Not finding what you are looking for?
Craftsman 10" Table Saw Logo

Related Topics:

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Craftsman Saws Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Craftsman Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...