Question about E-Machines T3410 (RBT3410) PC Desktop

3 Answers

Windows XP did not start successfully. The screen gives me five opitions. Safe mode, safe mode w/networking, safe mode with command prompt, last known good configburation and start windows normally. All five choices result in the computer going back to this screen. Windows XP came bundled with the software when I bought the computer, so I do not have a disc to get Windows XP reinstalled. How do I get the computer to work again?

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • E-Machines Master
  • 3,606 Answers

My guess is that your hard disk has crashed.
Or your system is damaged by virus.

You can buy a new windows version.
It does come as an OEM version not too expencive.
You maybe have to buy a new harddrive.

Your product site for drivers is HERE:

http://support.gateway.com/us/en/emac/product/default.aspx?tab=1&modelId=1567

Hope this was helpfull

Posted on Mar 14, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

You could try making a boot-up floppy disk from another computer with Windows XP. Just follow the instructions here: http://support.microsoft.com/kb/305595

Posted on Mar 14, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

There are several methods to get a non-booting PC to work again. Because you don't have an XP disc I'd suggest select the option that says "Don't restart on boot failure" or something along those lines. Then when it goes to a blue screen, use this website to help you further diagnose the problem: http://aumha.org/a/stop.htm

Posted on Mar 14, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bought a Fugitsu T4020D with a broken screen at a yard sale. Fixed the screen but it is password locked at BIOS, and before Windows loads. How can I unlock the BIOS to get into this thing?


1. Bypass Windows 7 Logon Password with Command Prompt While computer couldn't boot normally or notebook is infected with Trojans or malware, you can get rid of them by starting computer in Windows Safe Mode. Furthermore, when lost or forgot Windows password, you can also bypass Windows 7 logon password easily in Safe Mode.
In Windows 7, there are 3 different types of safe modes to choose, Safe Mode, Safe Mode with Networking and Safe Mode with Command Prompt. And the following guide is about how to bypass Windows login password with Command Prompt in Safe Mode. With net user command in Windows safe mode, you can reset Windows password effectively. Details as follows:
Step 1: Start or restart your Windows 7 computer.
Step 2: Press F8 to enter Advanced Boot Options before the Windows 7 loading screen appears.
Step 3: Choose Safe Mode with Command Prompt in the coming screen, and then press Enter.
Step 4: Wait for Windows 7 files loading until Windows login screen comes up.
Step 5: Log in Windows with an administrator account until you see login screen.
Step 6: A Command Prompt appears. Type net user in the Command Prompt and then hit Enter. All Windows user accounts will be listed for you.
Step 7: Type net user iSunshare 12345 and hit Enter.
Note: "iSunshare" is your locked Windows user account name. And "12345" means the new password you want to reset for the locked account. User account "iSunshare" will be reset with new password "12345".
Step 8: The new password has been successfully reset for user when the command is completed successfully.
Step 9: Login Windows 7 PC with the new password.
Whenever you need to access Windows in Safe Mode, an administrator account password is necessary. So it is highly recommended that write down Windows password and store it or creating a Windows password recovery disk before Windows password lost.

May 11, 2016 | Computers & Internet

Tip

How to make windows installer work in safe mode


Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Windows Installer will not work under Safe Mode, this means that programs cannot be installed or uninstalled in safe mode without giving a specific command using msiexec in command prompt.

To make Windows Installer work under safe mode, you need to create a registry entry for every type of safe mode you are logged in to.
  1. Safe Mode.
    Type this in a command prompt:
REG ADD "HKLM\SYSTEM\CurrentControlSet\Control
\SafeBoot\Minimal\MSIServer" /VE /T REG_SZ /F /D "Service"
and then net start msiserver This will start the Windows Installer Service.
  1. Safe Mode with Network
REG ADD "HKLM\SYSTEM\CurrentControlSet\Control
\SafeBoot\Network\MSIServer" /VE /T REG_SZ /F /D "Service"
and followed by net start msiserver This will start the Windows Installer Service.

on Mar 15, 2010 | Microsoft Windows XP Professional

1 Answer

What Can I Do to start Windows Successfully?


If its doing this then it looks like you have a faulty file on your windows set up, or a faulty hard disk so windows cannot read the files. boot up with your windows install disk there should be an option to repar your windows installation try this also you can use command line, to run a chkdsk on the drive.

Cliff

Aug 21, 2014 | HP Pavilion 513n (P9850A#ABA) PC Desktop

2 Answers

I'm forgot my password to login


If you are not able to boot your computer in normal mode or supposed your notebook is infected with Trojans or malware, you are able to get rid of them with Safe Mode. Furthermore, it is easier and safer to bypass Windows 7 logon password in Safe Mode when lost or forgot Windows password.
For Windows 7, there are 3 different types of safe mode, Safe Mode, Safe Mode with Networking and Safe Mode with Command Prompt. The following guide is about how to bypass Windows login password with Safe Mode with Command Prompt. With command in safe mode, you can reset Windows password. Details are as follow:
Step 1: Start or restart your Windows 7 computer.
Step 2: Press F8 to enter Advanced Boot Options before the Windows 7 loading screen appears.
Step 3: Choose Safe Mode with Command Prompt in the coming screen, and then press Enter.
Step 4: Wait for Windows 7 files to load until Windows login screen comes up.
Step 5: Log in with an administrator account until you see login screen.
Step 6: A Command Prompt appears. Type net user in the Command Prompt and then hit Enter. All Windows user accounts will be listed for you.
Step 7: Type "net user iSunshare 12345" and hit Enter.
reset-windows-password-with-cmd.png Step 8: The new password has been successfully reset when the command is completed successfully.
Step 9: Log on your PC with the new password.

Aug 21, 2014 | Computers & Internet

1 Answer

Start my pc on safemode


Windows 2000 and XP users Tip: If you are running Safe Mode because you cannot get into Windows, you may want to first try loading the last known good configuration.
To get into the Windows 2000 and XP Safe mode, as the computer is booting press and hold your "F8 Key" which should bring up the "Windows Advanced Options Menu" as shown below. Use your arrow keys to move to "Safe Mode" and press your Enter key.
Note: With some computers, if you press and hold a key as the computer is booting you will get a stuck key message. If this occurs, instead of pressing and holding the "F8 key", tap the "F8 key" continuously until you get the startup menu.
Trouble Getting into Windows 2000 or Windows XP Safe mode - If after several attempts you are unable to get into Windows 2000 or Windows XP Safe Mode as the computer is booting into Windows, turn off your computer. When the computer is turned on the next time Windows should notice that the computer did not successfully boot and give you the Safe Mode screen.

Windows Advanced Options Menu
Please select an option:
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debugging Mode
Start Windows Normally
Reboot
Return to OS Choices Menu
Use the up and down arrow keys to move the highlight to your choice. Once you're done in Safe mode if you want to get back into Normal Windows restart the computer like you normally would and let it boot normally. Click here to get additional information about getting out of Safe mode.
loading the last known good configuration.To get into the Windows Vista and Windows 7 Safe Mode, as the computer is booting press and hold your "F8 Key" which should bring up the "Windows Advanced Options Menu" as shown below. Use your arrow keys to move to "Safe Mode" and press your Enter key.
Note: With some computers if you press and hold a key as the computer is booting you will get a stuck key message. If this occurs, instead of pressing and holding the "F8 key", tap the "F8 key" continuously until you get the startup menu.
Trouble Getting into Safe mode - If after several attempts you are unable to get into Safe Mode as the computer is booting into Windows, turn off your computer. When the computer is turned on the next time Windows should notice that the computer did not successfully boot and give you the Safe Mode screen.

Choose Advanced Options for: Microsoft Windows Vista
Please select an option:
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Enable Boot Logging
Enable low-resolution video (640x480)
Last Known Good Configuration (advanced)
Directory Services Restore Mode
Debugging Mode
Disable automatic restart on system failure
Disable Driver Signature Enforcement
Start Windows Normally
Description: Start Windows with only the core drivers and services. Use
when you cannot boot after installing a new device or driver. Once you're done in Safe mode if you want to get back into Normal Windows restart the computer like you normally would and let it boot normally.

Aug 13, 2014 | Computers & Internet

3 Answers

How do you put windows into safe mode?


Power on or Restart your computer, keep tapping F8 on the keyboard while it boots up. After few seconds, you'll be taken to the "Advanced Boot Options" with "Safe Mode" in the lists. Use the Up-Down arrow keys to highlight the "Safe Mode" and press enter on the keyboard to confirm the selected boot options. Black Screen with white texts will be displayed on the display, wait for few seconds until you see the windows logon Screen. You'll also see a confirmation message box asking you to confirm to boot into Safe Mode, click "yes" or "Ok" and proceed forward. There now you are in the Safe Mode.

If you need further help, let me know.

Good luck.

Thanks for using FixYa.

Sep 26, 2010 | Computers & Internet

1 Answer

The command prompt does not come up. Ive got a Avertec 6100 that doesnt boot. It give me a screen that asks me to: SAFE MODE SAFE MODE W/ NETWORKING SAFE MODE W/ COMMAND PROMPT LAST KNOWN GOOD CONFIG START...


You are experiencing either a memory issue or OS problem.

First, remove all your memory modules and insert one at a time to test.

If still a problem, try Windows Repair.

If necessary, reinstall Windows.

Hope this helps.

Aug 13, 2009 | Averatec 6100 Notebook

3 Answers

Windows XP operating system does not load.


You need to repair your windows xp installation.
Insert the xp install cd and power off - then power on your pc.
If the screen says "press any key to boot from cd" then do that.
It takes a while until you get to choose options.
Choose the repair previous installation option by pressing the R key when prompted.
Follow the instructions on the screen and you should be fine.

May 09, 2009 | E-Machines (T2958) PC Desktop

1 Answer

HELP!! (dell precision 340) im getting 4 screens when i turn on m


Reboot into Safe Mode by repeatingly tapping on F8 while in process of rebooting and then select "last known good configuration". If that fails reboot again to safe mode and select safe mode with command prompt and in the command prompt type "chkdsk /f /r " <enter>

If that doesnt work do place your Windows CD into the Cd-Rom, reboot and select option "Repair"

Jan 02, 2009 | Dell Precision 360n PC Desktop

1 Answer

Windows XP fails to load and Computer will not start up.


Boot from startup floppy disks or CD-ROM, choose repair option during setup, and run Recovery Console. When you are logged on, you can run FIXMBR command to fix master boot record. This should solve your problem.

Sep 20, 2007 | HP Compaq Presario V2000 Notebook

Not finding what you are looking for?
E-Machines T3410 (RBT3410) PC Desktop Logo

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...