Question about Sentry Safe Fire-Safe Personal Safe

2 Answers

I have the didgital S0500 and can't find the instruction booklet. How can I change the entry code and where do I replace the battery Is it possible to get another booklet Thanx

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Http://www.sentrysafe.com/Products/34/S0500_FIRE-SAFE_Personal_Safe
If you scroll to the bottom and click on Owner's Manual - You can download it from that tab.

Posted on Mar 25, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 35 Answers

Http://www.sentrysafe.com/CustomerCare/Product_Manuals

Go to this link and put in the product information and it will give you a pdf of the user manual.

Posted on Mar 14, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Im using same code since but now i cannot open my digital safe is noble H0850


The batteries could be too discharged to release the bolt locking mechanism so the key must be used to gain entry to replace the batteries and possibly reset the code.

The dry batteries used in an electronic safe last such a long time they are often forgotten until trouble is experienced. Once accessed it is often discovered one or more of the batteries have leaked and caused corrosion so extensive cleaning and sometimes repairs must be carried out before long life and reliability can be assured.

It is wise to refer to the instruction booklet beforehand.

Good luck!

Feb 09, 2015 | Home Security

1 Answer

2001 FORD WINDSTAR KEYLESS ENTRY CODES


check the auto booklet if you do not have one go on line and key inn ford windstar keyless entry codes The Ford dealer ship can assist also.

Jul 02, 2014 | 2001 Mercury Sable

1 Answer

Lost the instructions How do I reset the entry


How can I program my electronic keypad lock when the instructions with the programming code have been lost?
The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.
This number is the programming code referenced in the information for changing the entry code.

This link will take you to the page that you need to get started:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Then scroll down to this heading on that page:

Electronic Security-Keypad Deadbolt BE365

There's a wealth of info under that heading. You will be able to see a PDF file of the original print instructions, as well as a video of how to install the lock. This installation video (second item down) will be useful to allow you to disassemble it and view the sticker. This is also a great time to change the 9-volt battery! Batteries should be replace about every three years.
The seventh item under that same header is a video which walks you through how to reprogram the keypad to your new code, using that programming code that you found on the backside of the keypad.
A note about the PDF files: If you cannot view a given file, you need to first install Adobe reader. You can get the free download from here:

http://get.adobe.com/reader/

Good luck--and please provide feedback if this helps!

Aug 20, 2011 | Schlage BE365-CAM BE365CAM505 Lifetime...

1 Answer

I need to change the batteries and reset the pass code in (2) keyless locks ("Locknetics On Board"). The owner's manuals were never given, and the key (Schlage) override was never used.(No...


How can I program my electronic keypad lock when the instructions with the programming code have been lost?
The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.
This number is the programming code referenced in the information for changing the entry code.

This link will take you to the page that you need to get started:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Then scroll down to this heading on that page:
Electronic Security-Keypad Entry Flex-lock FE595/Keypad Entry Auto-Lock FE575 Documents

There's a wealth of info under that heading. You will be able to see a PDF file of the original print instructions, as well as a video of how to install the lock. This installation video (third item down) will be useful to allow you to disassemble it and view the sticker. This is also a great time to change the 9-volt battery! Batteries should be replace about every three years.
The eighth item under that same header is a video which walks you through how to reprogram the keypad to your new code, using that programming code that you found on the backside of the keypad.
A note about the PDF files: If you cannot view a given file, you need to first install Adobe reader. You can get the free download from here:

http://get.adobe.com/reader/

Good luck--and please provide feedback if this helps!

Jul 06, 2011 | Schlage FE595VCAM716ACC Camelot Keypad...

1 Answer

What are the codes to program a Philips Universal remote to a Sterio Monitor TV ( it's also GE ) ?


The remote should have come with a booklet with all possible codes for the various brands and models of TV's. there are probably several codes for GE televisions.The booklet also gives instructions on how to find the correct code. If you do not have the booklet, get back to me with details: model number of your remote and model number of your TV, and I may be able to help.

Dec 28, 2010 | Televison & Video

1 Answer

I have the rona keyless entry lock (with single numbers on the front to enter our code.) For some reason, I cannot get it to change the code and have since lost my instructions. Can you please tell me...


remove all batteries then press any button on the keypad 3 times.Wait 10 seconds then replace batteries.You should hear a long beep followed by a short beep then press and hold the 0 button for 3 seconds. Red LED should flash 3 times and you should hear 3 long beeps. Now release the 0 button. Now enter new Master code (4-12 digits) followed by the LOCK button.You only have 15 secs to do this. LED should flash green once followed by a melody tone. Good luck
Bob...

Sep 07, 2010 | Directed Dei Valet 561r Remote...

1 Answer

Lost code booklet for my oneforall remote


I can help you with your URC-3021 Universal Remote Control issues.

The codes for Sanyo TVs is: 0154.
The codes for RCA DVDs are: 0522, 0571, & 0717.
The codes for Magnavox DVDs are: 0503, & 0675. These may or may not work with newer Blu-Ray players. Since you have two disc players, you will need to reassign the CBL/SAT key to act as a second DVD key.
I don't believe the URC-3021 stores codes for surround sound amplifiers: it has only three function buttons: TV, DVD/VCR and CBL/SAT.

For complete instructions on entering the URC-3021 remote codes, please refer to my posted Fixya Tip One For All URC-3021 Code Entry.

I hope that helps.
_______________________________________________
Reassign URC-3021 Device Key
Urc-3021 Code List Download
One For All URC-3021 Code Search

Feb 13, 2010 | One For All URC-3021 Remote Control

1 Answer

I need a battery holder (for 4aa batterys) for my s0500 fire safe. how much and how do i order


most electrical stores carry these at around $2.00

Please rate our help to keep the FREE service online++++Thanks for using FIXYA

Sep 13, 2009 | Sentry Fireproof Safe

2 Answers

Transmit no recieve


Mike 2 things are needed to get 2 radios comunicated 1 channel, 2 the Squelch code, if both are the same in each radio (same chaennel and same code Ex. Ch 5 Code 22) the radios must to be comunicated. Press the menu key to change each of this features The Squelch code can be PL or DPL, no matter wich one are you using, just need to be the same.

Feb 05, 2007 | Columbia Telecommunications Group SVND-14S...

Not finding what you are looking for?
Sentry Safe Fire-Safe Personal Safe Logo

578 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sentry Home Security Experts

Jim London
Jim London

Level 2 Expert

257 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

 Brian Main
Brian Main

Level 3 Expert

424 Answers

Are you a Sentry Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...