Question about Kenwood KDC-W7027 CD Player

2 Answers

I changed battery in the car and I lost the security code for my KDC-W7027. The s/no is ke1058s0304405. Is there a way to recover it?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 50 Answers

Hello... sorry to hear you are having problems. Give this a try. It is sorta legnthy, but it may work. You will need the remote control to do this. It may not work, but it is worth a shot.

4. Simple way to clear the security code (K type only)

1. During code request mode, press the Track UP key for at

least 3 seconds while holding down the AUTO key. (- - - -

will disappear)

2. Enter, "KCAR" with the remote controller as described below.

• Press the remote controller 5 key twice, and press the Track

Up key. (Enters a "K" )

• Press the remote controller 2 key three times, and press

the Track Up key. (Enters a "C" )

• Press the remote controller 2 key once, and press the Track

Up key. (Enters an "A" )

• Press the remote controller 7 key twice, and press the Track

Up key. (Enters an "R" )

3. Security function is canceled and unit sets to All-Off mode.

4. Code request mode appears if a mistake was made in entering
the numbers.

If this doesnt work, you will have to contact an authorized kenwood service center!

Hope this helped!!

Posted on Mar 14, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 4 Answers

Yes there is

Posted on Mar 14, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My battery died and I had to get a new battery. I can not remember the security code for the car radio KDC-MP342u can you help?


You may have to contact the manufacturer for details on that. Check in your owners manual for the phone number of their customer service. I had a similar problem after changing battery but found the answer right in the manual. Mine was a Kia.

Jan 07, 2017 | Kenwood Car Audio & Video

1 Answer

E05 error kenwood kdc-w7027


Sounds like your laser is dirty or faulty. Try a cleaning CD.

Dec 10, 2013 | Computers & Internet

1 Answer

Kenwood KDC-W7027 will not go home all the way


Chances are, there is either a bad gear or a bad position sensor lever. More than likely it will be the lever. Both parts are inside of the deck itself

Dec 11, 2012 | Kenwood KDC-W7027 CD Player

1 Answer

KDC-7027 car sterio comes on for a second then moves then goes off again


sound like you have a bad ground. pull the stereo out and check your ground wire go from there.

Jan 11, 2011 | Kenwood KDC-W7027 CD Player

3 Answers

Security code for kenwood kdc-mv6521


It actually IS very common for people to change a battery in a vehicle, as they OFTEN develop problems.

Please CLICK HERE to see a tip on bypassing Kenwood security codes, and how to obtain the code by contacting Kenwood or an authorized Retailer.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Apr 28, 2010 | Kenwood KDC-MV6521 CD Player

1 Answer

I lost my security code when I changed my car battery. How do I reset it?? I purchased the car used 5 years ago.


Hello there... well I have this bit of information for you from the Kenwood MP528 manual...

When the Security Code function is activated, the code
can’t be changed and the function can’t be released.
Note, the Security Code can be set as the 4 digit number
of your choice

That's from Page 23 of this manual(which does apply to your model):

http://www.kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/KDCX589.pdf

At this point I'm not certain about what options you may have...

Apr 09, 2010 | Kenwood KDC-MP528 CD Player

1 Answer

Is there anyway to recover lost Mcintosh MX-406 car cd player deck security code.


yes..... you can shove two to three fingers in your ***, or your entire fist, what ever you perfer most, then begin to milk your prostate untill you explode, but you need to count how many pumps it took you to ***! That will be your first number, then continue the process for the next three digets for your code.

Jan 15, 2010 | Kenwood KDC-MP528 CD Player

2 Answers

How to put the code in my cd radio


SELECT THE SECURITY DIGITS TO ENTER PRESS THE FM OR AM BUTTONS PRESS THE [[ ]] ARROW SEARCH BUTTONS TO MOVE ALONG AS YOU ENTER YOUR CODE WHEN CODE IS ENTERED PRESS AND HOLD ]] FORWARD SEARCH BUTTON FOR 3 SECONDS RE-ENTER MAY APPEAR REPEAT THE SAME AS ABOVE TO COMFIRM CODE IF NESSARY HOPE THIS HELPS YOU JAKE YOU CAN DOWN LOAD A MANUAL FREE I HAVE ENCLOSED MY MOBILE NO 07936635539

Jun 07, 2008 | Kenwood Car Audio & Video

2 Answers

"WAITING 3"DISPLAYED


KENWOOD SECURITY CODE CLEAR procedure Your radio will require one of the following procedures. Type 1 During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that ??? disappears). Then using your remote enter your code. Type 2 Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear". Then using your remote enter your code. Type 3 Model# DPX-4020 and DPX-4030 Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display. Then using your remote, enter your code. Enter your number from the remote control unit. Your code number is 5227 (KCAR) * Press numeric key ?5? ( 2 times ) and press the Track UP/Next Track key * Press numeric key ?2? ( 3 times ) and press the Track UP/Next Track key * Press numeric key ?2? ( 1 time ) and press the Track UP/Next Track key * Press numeric key ?7? ( 2 times ) and press the Track UP/Next Track key The security is canceled and the set enters the TUNER mode! Luck

Nov 20, 2006 | Kenwood KDC-W7027 CD Player

Not finding what you are looking for?
Kenwood KDC-W7027 CD Player Logo

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4861 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...