Question about LG Computers & Internet

1 Answer

I have a flatiron m1921a, every time I connect it to my pc, I get a no signal on my screen, what do I do please?

Posted by on

  • Jean-Pierre Damstra
    Jean-Pierre Damstra Mar 14, 2011

    Does this only happen with this monitor?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 87 Answers

Hi,

Welcome to FixYa!

There are three reasons why you are encountering that problem, it's either the VGA cable, VGA port or the monitor itself. Please follow these steps for you to be able to isolate the exact problem.

1. Disconnect/Connect the VGA cable.

2.. Make sure that the VGA cable is properly connected

3. Try to use another VGA cable

4. Try to connect another monitor.

If you're already done with these steps and its still the same, most probably, the problem is with the VGA port. In that case, you will need to replaced the Motherboard itself.

Hope this information will help. Thank you for using FixYa.

Posted on Mar 14, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Flat Iron is not heating up


There is no fuse. If you connected it to 220 which is common power in a lot of countries, then you ruined the heating element. time for a new iron.

Feb 21, 2014 | Conair BABINKW2091 White Babyliss Pro 1...

1 Answer

I have an LG Flatiron W2361V monitor purchased in December. After sitting for about 3-4 minutes, the screen goes black (I guess into hibernation?) but comes right back on if the keyboard is touched. I...


Check if the screen saver is set to come on at 90 minutes, and the VGA cable, is tightly connected at both ends, if so, it might be a virus, check your virus detecting software,

Nov 03, 2010 | LG Computers & Internet

2 Answers

NO SIGNAL PROBLEM


Please check whether the monitor is set to the correct settings. If you feel its incorrect, most LCD/TFT monitors come with an auto set up button which will restore the display to one that usually works. In case it still doesnt work, you might need to connect your pc to a different monitor and check the display settings. You could also try to download the drivers for this monitor and then re-connect the monitor and see if it works.

Jun 02, 2009 | ASUS VW192S Monitor

1 Answer

No signal


Hi and welcome to FixYa,

Initially, the "No Signal" error message indicates just that, it is not receiving anything or that the signal it receives is beyond its capacity. With this in mind, pls check:
  • the cable connection from PC to Projector;
  • that the PC is set to display on a 2nd monitor, TV or Projector depending on the capability of the PC's video card (Twin View or Dual View); or
  • as main monitor;
  • lower down the computer's Screen Resolution and/or Screen refresh rate.
Just a start, do postback how things turned up or should you need additional information. Good luck and Thank you for using FixYa.

Nov 26, 2008 | Dell 2300MP Multimedia Projector

1 Answer

Emachine shows no signal when turned on black screen


check your cable from the monitor to the PC , make sure they are all fully connected and try again . please post what happens

Sep 15, 2008 | E-Machines eMachines Desktop PC

1 Answer

Monitor automatically clicks into power saving mode


check the primary settings for your default video card.

Jun 08, 2008 | Dell Dimension 4600 PC Desktop

1 Answer

Lg flatiron wide screen


This problem is showing when the main PCB of the monitor failed. contact the LG service provider in your area. They will change the full package assembly or PCB. check this link to get the service center info
http://www.lgservice.com/

Nov 28, 2007 | LG L1915S 19" LCD Monitor

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18408 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Are you a LG Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...